domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

kernel: update kernel 4.9 to 4.9.29

Browse Source 
- Refresh all patches
- Removed upstreamed
- Adapted 1

Compile tested on: bcm53xx, cns3xxx, imx6, lantiq
Run tested on: cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[update from 4.9.28 to 4.9.29]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Koen Vandeputte
2017-05-15 13:11:05 +02:00
committed by Hauke Mehrtens
parent 088e28772c
commit e842e16f45
71 changed files with 149 additions and 1089 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
include/kernel-version.mk
View File

@@ -4,11 +4,11 @@ LINUX_RELEASE?=1
LINUX_VERSION-3.18 = .43
LINUX_VERSION-4.4 = .69
LINUX_VERSION-4.9 = .20
LINUX_VERSION-4.9 = .29
LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c
LINUX_KERNEL_HASH-4.4.69 = 207bbc50aaf827d667a2762312bd6127887cc669ff7a7270b876e7102b8f84fa
LINUX_KERNEL_HASH-4.9.20 = 48660806dd32fb8dcbcf5932291bf6cc7d29240070372230871e0f56fea81341
LINUX_KERNEL_HASH-4.9.29 = 51b6df767544e593e3161b0109a6a76be18bfc9d6cc1fb7fa92b48de6cff24cf
ifdef KERNEL_PATCHVER
LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))

6
target/linux/apm821xx/patches-4.9/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
View File

@@ -44,7 +44,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
#include "xhci.h"
#include "xhci-trace.h"
@@ -221,6 +223,458 @@ static void xhci_pme_acpi_rtd3_enable(st
@@ -224,6 +226,458 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
#endif /* CONFIG_ACPI */
@@ -503,7 +503,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
@@ -260,6 +714,22 @@ static int xhci_pci_probe(struct pci_dev
@@ -263,6 +717,22 @@ static int xhci_pci_probe(struct pci_dev
struct hc_driver *driver;
struct usb_hcd *hcd;
@@ -526,7 +526,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
driver = (struct hc_driver *)id->driver_data;
/* Prevent runtime suspending between USB-2 and USB-3 initialization */
@@ -317,6 +787,16 @@ static void xhci_pci_remove(struct pci_d
@@ -320,6 +790,16 @@ static void xhci_pci_remove(struct pci_d
{
struct xhci_hcd *xhci;

2
target/linux/apm821xx/patches-4.9/802-usb-xhci-force-msi-renesas-xhci.patch
View File

@@ -44,7 +44,7 @@ produce a noisy warning.
/* hcd->irq is 0, we have MSI */
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1674,6 +1674,7 @@ struct xhci_hcd {
@@ -1678,6 +1678,7 @@ struct xhci_hcd {
/* support xHCI 0.96 spec USB2 software LPM */
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */

4
target/linux/arc770/patches-4.9/700-stmmac-Disable-frame-filtering-completely.patch
View File

@@ -20,8 +20,8 @@ Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -42,7 +42,7 @@
#define DWMAC_CORE_3_50 0x35
@@ -49,7 +49,7 @@
#define STMMAC_GET_ENTRY(x, size) ((x + 1) & (size - 1))
#undef FRAME_FILTER_DEBUG
-/* #define FRAME_FILTER_DEBUG */

4
target/linux/archs38/patches-4.9/700-stmmac-Disable-frame-filtering-completely.patch
View File

@@ -20,8 +20,8 @@ Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -42,7 +42,7 @@
#define DWMAC_CORE_3_50 0x35
@@ -49,7 +49,7 @@
#define STMMAC_GET_ENTRY(x, size) ((x + 1) & (size - 1))
#undef FRAME_FILTER_DEBUG
-/* #define FRAME_FILTER_DEBUG */

75
target/linux/bcm53xx/patches-4.9/031-ARM-BCM5301X-Add-back-handler-ignoring-external-impr.patch
View File

@@ -1,75 +0,0 @@
From 09f3510fb70a46c8921f2cf4a90dbcae460a6820 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sat, 29 Oct 2016 13:12:29 +0200
Subject: [PATCH] ARM: BCM5301X: Add back handler ignoring external imprecise
aborts
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Since early BCM5301X days we got abort handler that was removed by
commit 937b12306ea79 ("ARM: BCM5301X: remove workaround imprecise abort
fault handler"). It assumed we need to deal only with pending aborts
left by the bootloader. Unfortunately this isn't true for BCM5301X.
When probing PCI config space (device enumeration) it is expected to
have master aborts on the PCI bus. Most bridges don't forward (or they
allow disabling it) these errors onto the AXI/AMBA bus but not the
Northstar (BCM5301X) one.
iProc PCIe controller on Northstar seems to be some older one, without
a control register for errors forwarding. It means we need to workaround
this at platform level. All newer platforms are not affected by this
issue.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/mach-bcm/bcm_5301x.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
--- a/arch/arm/mach-bcm/bcm_5301x.c
+++ b/arch/arm/mach-bcm/bcm_5301x.c
@@ -9,14 +9,42 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+#define FSR_EXTERNAL (1 << 12)
+#define FSR_READ (0 << 10)
+#define FSR_IMPRECISE 0x0406
static const char *const bcm5301x_dt_compat[] __initconst = {
"brcm,bcm4708",
NULL,
};
+static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+{
+ /*
+ * We want to ignore aborts forwarded from the PCIe bus that are
+ * expected and shouldn't really be passed by the PCIe controller.
+ * The biggest disadvantage is the same FSR code may be reported when
+ * reading non-existing APB register and we shouldn't ignore that.
+ */
+ if (fsr == (FSR_EXTERNAL | FSR_READ | FSR_IMPRECISE))
+ return 0;
+
+ return 1;
+}
+
+static void __init bcm5301x_init_early(void)
+{
+ hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
+ "imprecise external abort");
+}
+
DT_MACHINE_START(BCM5301X, "BCM5301X")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.dt_compat = bcm5301x_dt_compat,
+ .init_early = bcm5301x_init_early,
MACHINE_END

41
target/linux/bcm53xx/patches-4.9/033-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch
View File

@@ -1,41 +0,0 @@
From 0e34079cd1f674449749aafe4be07336177de90d Mon Sep 17 00:00:00 2001
From: Jon Mason <jon.mason@broadcom.com>
Date: Thu, 2 Mar 2017 19:21:32 -0500
Subject: [PATCH] ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
GIC_PPI flags were misconfigured for the timers, resulting in errors
like:
[ 0.000000] GIC: PPI11 is secure or misconfigured
Changing them to being edge triggered corrects the issue
Suggested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -66,14 +66,14 @@
timer@20200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&periph_clk>;
};
local-timer@20600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x20600 0x100>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
clocks = <&periph_clk>;
};

131
target/linux/bcm53xx/patches-4.9/089-PCI-iproc-Save-host-bridge-window-resource-in-struct.patch
View File

@@ -1,131 +0,0 @@
From 6e347b5e05ea2ac4ac467a5a1cfaebb2c7f06f80 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bhelgaas@google.com>
Date: Thu, 9 Mar 2017 11:27:07 -0600
Subject: [PATCH] PCI: iproc: Save host bridge window resource in struct
iproc_pcie
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The host bridge memory window resource is inserted into the iomem_resource
tree and cannot be deallocated until the host bridge itself is removed.
Previously, the window was on the stack, which meant the iomem_resource
entry pointed into the stack and was corrupted as soon as the probe
function returned, which caused memory corruption and errors like this:
pcie_iproc_bcma bcma0:8: resource collision: [mem 0x40000000-0x47ffffff] conflicts with PCIe MEM space [mem 0x40000000-0x47ffffff]
Move the memory window resource from the stack into struct iproc_pcie so
its lifetime matches that of the host bridge.
Fixes: c3245a566400 ("PCI: iproc: Request host bridge window resources")
Reported-and-tested-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v4.8+
---
drivers/pci/host/pcie-iproc-bcma.c | 24 ++++++++++++------------
drivers/pci/host/pcie-iproc-platform.c | 19 ++++++++++---------
drivers/pci/host/pcie-iproc.h | 1 +
3 files changed, 23 insertions(+), 21 deletions(-)
--- a/drivers/pci/host/pcie-iproc-bcma.c
+++ b/drivers/pci/host/pcie-iproc-bcma.c
@@ -44,8 +44,7 @@ static int iproc_pcie_bcma_probe(struct
{
struct device *dev = &bdev->dev;
struct iproc_pcie *pcie;
- LIST_HEAD(res);
- struct resource res_mem;
+ LIST_HEAD(resources);
int ret;
pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
@@ -62,22 +61,23 @@ static int iproc_pcie_bcma_probe(struct
pcie->base_addr = bdev->addr;
- res_mem.start = bdev->addr_s[0];
- res_mem.end = bdev->addr_s[0] + SZ_128M - 1;
- res_mem.name = "PCIe MEM space";
- res_mem.flags = IORESOURCE_MEM;
- pci_add_resource(&res, &res_mem);
+ pcie->mem.start = bdev->addr_s[0];
+ pcie->mem.end = bdev->addr_s[0] + SZ_128M - 1;
+ pcie->mem.name = "PCIe MEM space";
+ pcie->mem.flags = IORESOURCE_MEM;
+ pci_add_resource(&resources, &pcie->mem);
pcie->map_irq = iproc_pcie_bcma_map_irq;
- ret = iproc_pcie_setup(pcie, &res);
- if (ret)
+ ret = iproc_pcie_setup(pcie, &resources);
+ if (ret) {
dev_err(dev, "PCIe controller setup failed\n");
-
- pci_free_resource_list(&res);
+ pci_free_resource_list(&resources);
+ return ret;
+ }
bcma_set_drvdata(bdev, pcie);
- return ret;
+ return 0;
}
static void iproc_pcie_bcma_remove(struct bcma_device *bdev)
--- a/drivers/pci/host/pcie-iproc-platform.c
+++ b/drivers/pci/host/pcie-iproc-platform.c
@@ -46,7 +46,7 @@ static int iproc_pcie_pltfm_probe(struct
struct device_node *np = dev->of_node;
struct resource reg;
resource_size_t iobase = 0;
- LIST_HEAD(res);
+ LIST_HEAD(resources);
int ret;
of_id = of_match_device(iproc_pcie_of_match_table, dev);
@@ -108,23 +108,24 @@ static int iproc_pcie_pltfm_probe(struct
pcie->phy = NULL;
}
- ret = of_pci_get_host_bridge_resources(np, 0, 0xff, &res, &iobase);
+ ret = of_pci_get_host_bridge_resources(np, 0, 0xff, &resources,
+ &iobase);
if (ret) {
- dev_err(dev,
- "unable to get PCI host bridge resources\n");
+ dev_err(dev, "unable to get PCI host bridge resources\n");
return ret;
}
pcie->map_irq = of_irq_parse_and_map_pci;
- ret = iproc_pcie_setup(pcie, &res);
- if (ret)
+ ret = iproc_pcie_setup(pcie, &resources);
+ if (ret) {
dev_err(dev, "PCIe controller setup failed\n");
-
- pci_free_resource_list(&res);
+ pci_free_resource_list(&resources);
+ return ret;
+ }
platform_set_drvdata(pdev, pcie);
- return ret;
+ return 0;
}
static int iproc_pcie_pltfm_remove(struct platform_device *pdev)
--- a/drivers/pci/host/pcie-iproc.h
+++ b/drivers/pci/host/pcie-iproc.h
@@ -68,6 +68,7 @@ struct iproc_pcie {
#ifdef CONFIG_ARM
struct pci_sys_data sysdata;
#endif
+ struct resource mem;
struct pci_bus *root_bus;
struct phy *phy;
int (*map_irq)(const struct pci_dev *, u8, u8);

12
target/linux/bcm53xx/patches-4.9/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
View File

@@ -127,11 +127,11 @@ it on BCM4708 family.
/*
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1657,6 +1657,7 @@ struct xhci_hcd {
#define XHCI_SSIC_PORT_UNUSED (1 << 22)
#define XHCI_NO_64BIT_SUPPORT (1 << 23)
#define XHCI_MISSING_CAS (1 << 24)
+#define XHCI_FAKE_DOORBELL (1 << 25)
@@ -1660,6 +1660,7 @@ struct xhci_hcd {
/* For controller with a broken Port Disable implementation */
#define XHCI_BROKEN_PORT_PED (1 << 25)
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
+#define XHCI_FAKE_DOORBELL (1 << 27)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */

2
target/linux/bcm53xx/patches-4.9/905-BCM53573-minor-hacks.patch
View File

@@ -69,7 +69,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/interrupt.h>
@@ -513,6 +514,16 @@ arch_timer_detect_rate(void __iomem *cnt
@@ -514,6 +515,16 @@ arch_timer_detect_rate(void __iomem *cnt
arch_timer_rate = arch_timer_get_cntfrq();
}

2
target/linux/brcm2708/patches-4.9/950-0005-mm-Remove-the-PFN-busy-warning.patch
View File

@@ -14,7 +14,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -7323,8 +7323,6 @@ int alloc_contig_range(unsigned long sta
@@ -7324,8 +7324,6 @@ int alloc_contig_range(unsigned long sta
/* Make sure the range is really isolated. */
if (test_pages_isolated(outer_start, end, false)) {

2
target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch
View File

@@ -696,7 +696,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
}
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5009,7 +5009,7 @@ static void port_event(struct usb_hub *h
@@ -5025,7 +5025,7 @@ static void port_event(struct usb_hub *h
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
u16 status = 0, unused;

2
target/linux/brcm2708/patches-4.9/950-0047-Added-hwmon-thermal-driver-for-reporting-core-temper.patch
View File

@@ -39,7 +39,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
depends on X86_THERMAL_VECTOR
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_MAX77620_THERMAL) += max776
@@ -42,6 +42,7 @@ obj-$(CONFIG_MAX77620_THERMAL) += max776
obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o

4
target/linux/brcm2708/patches-4.9/950-0060-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch
View File

@@ -10,7 +10,7 @@ Subject: [PATCH] config: Enable CONFIG_MEMCG, but leave it disabled (due to
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -5626,7 +5626,7 @@ int __init cgroup_init_early(void)
@@ -5627,7 +5627,7 @@ int __init cgroup_init_early(void)
return 0;
}
@@ -19,7 +19,7 @@ Subject: [PATCH] config: Enable CONFIG_MEMCG, but leave it disabled (due to
/**
* cgroup_init - cgroup initialization
@@ -6163,6 +6163,28 @@ static int __init cgroup_no_v1(char *str
@@ -6164,6 +6164,28 @@ static int __init cgroup_no_v1(char *str
}
__setup("cgroup_no_v1=", cgroup_no_v1);

90
target/linux/brcm2708/patches-4.9/950-0106-i2c-bcm2835-Fix-hang-for-writing-messages-larger-tha.patch
View File

@@ -1,90 +0,0 @@
From 89b466914a0d49f08d00be25556ba22497b9a284 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
Date: Sat, 17 Sep 2016 15:07:10 +0200
Subject: [PATCH] i2c: bcm2835: Fix hang for writing messages larger than 16
bytes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Writing messages larger than the FIFO size results in a hang, rendering
the machine unusable. This is because the RXD status flag is set on the
first interrupt which results in bcm2835_drain_rxfifo() stealing bytes
from the buffer. The controller continues to trigger interrupts waiting
for the missing bytes, but bcm2835_fill_txfifo() has none to give.
In this situation wait_for_completion_timeout() apparently is unable to
stop the madness.
The BCM2835 ARM Peripherals datasheet has this to say about the flags:
TXD: is set when the FIFO has space for at least one byte of data.
RXD: is set when the FIFO contains at least one byte of data.
TXW: is set during a write transfer and the FIFO is less than full.
RXR: is set during a read transfer and the FIFO is or more full.
Implementing the logic from the downstream i2c-bcm2708 driver solved
the hang problem.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Martin Sperl <kernel@martin.sperl.org>
---
drivers/i2c/busses/i2c-bcm2835.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -64,6 +64,7 @@ struct bcm2835_i2c_dev {
int irq;
struct i2c_adapter adapter;
struct completion completion;
+ struct i2c_msg *curr_msg;
u32 msg_err;
u8 *msg_buf;
size_t msg_buf_remaining;
@@ -126,14 +127,13 @@ static irqreturn_t bcm2835_i2c_isr(int t
return IRQ_HANDLED;
}
- if (val & BCM2835_I2C_S_RXD) {
- bcm2835_drain_rxfifo(i2c_dev);
- if (!(val & BCM2835_I2C_S_DONE))
- return IRQ_HANDLED;
- }
-
if (val & BCM2835_I2C_S_DONE) {
- if (i2c_dev->msg_buf_remaining)
+ if (i2c_dev->curr_msg->flags & I2C_M_RD) {
+ bcm2835_drain_rxfifo(i2c_dev);
+ val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
+ }
+
+ if ((val & BCM2835_I2C_S_RXD) || i2c_dev->msg_buf_remaining)
i2c_dev->msg_err = BCM2835_I2C_S_LEN;
else
i2c_dev->msg_err = 0;
@@ -141,11 +141,16 @@ static irqreturn_t bcm2835_i2c_isr(int t
return IRQ_HANDLED;
}
- if (val & BCM2835_I2C_S_TXD) {
+ if (val & BCM2835_I2C_S_TXW) {
bcm2835_fill_txfifo(i2c_dev);
return IRQ_HANDLED;
}
+ if (val & BCM2835_I2C_S_RXR) {
+ bcm2835_drain_rxfifo(i2c_dev);
+ return IRQ_HANDLED;
+ }
+
return IRQ_NONE;
}
@@ -155,6 +160,7 @@ static int bcm2835_i2c_xfer_msg(struct b
u32 c;
unsigned long time_left;
+ i2c_dev->curr_msg = msg;
i2c_dev->msg_buf = msg->buf;
i2c_dev->msg_buf_remaining = msg->len;
reinit_completion(&i2c_dev->completion);

49
target/linux/generic/patches-4.9/012-usb-Make-sure-usb-phy-of-gets-built-in.patch
View File

@@ -1,49 +0,0 @@
From 3d6159640da9c9175d1ca42f151fc1a14caded59 Mon Sep 17 00:00:00 2001
From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Date: Thu, 13 Apr 2017 15:33:34 +0300
Subject: [PATCH] usb: Make sure usb/phy/of gets built-in
DWC3 driver uses of_usb_get_phy_mode() which is
implemented in drivers/usb/phy/of.c and in bare minimal
configuration it might not be pulled in kernel binary.
In case of ARC or ARM this could be easily reproduced with
"allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m.
On building all ends-up with:
---------------------->8------------------
Kernel: arch/arm/boot/Image is ready
Kernel: arch/arm/boot/zImage is ready
Building modules, stage 2.
MODPOST 5 modules
ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
---------------------->8------------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/Makefile | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_USB_PHY) += usb/
obj-$(CONFIG_USB) += usb/
obj-$(CONFIG_PCI) += usb/
obj-$(CONFIG_USB_GADGET) += usb/
+obj-$(CONFIG_OF) += usb/
obj-$(CONFIG_SERIO) += input/serio/
obj-$(CONFIG_GAMEPORT) += input/gameport/
obj-$(CONFIG_INPUT) += input/

25
target/linux/generic/patches-4.9/031-ubifs-fix-RENAME_WHITEOUT-support.patch
View File

@@ -1,25 +0,0 @@
From: Felix Fietkau <nbd@nbd.name>
Date: Mon, 6 Mar 2017 09:48:52 +0100
Subject: [PATCH] ubifs: fix RENAME_WHITEOUT support
Remove faulty leftover check in do_rename(), apparently introduced in a
merge that combined whiteout support changes with commit f03b8ad8d386
("fs: support RENAME_NOREPLACE for local filesystems")
Fixes: 9e0a1fff8db5 ("ubifs: Implement RENAME_WHITEOUT")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -1088,9 +1088,6 @@ static int do_rename(struct inode *old_d
struct timespec time;
unsigned int uninitialized_var(saved_nlink);
- if (flags & ~RENAME_NOREPLACE)
- return -EINVAL;
-
/*
* Budget request settings: deletion direntry, new direntry, removing
* the old inode, and changing old and new parent directory inodes.

70
target/linux/generic/patches-4.9/040-01-MIPS-Introduce-irq_stack.patch
View File

@@ -1,70 +0,0 @@
From: Matt Redfearn <matt.redfearn@imgtec.com>
Date: Mon, 19 Dec 2016 14:20:56 +0000
Subject: [PATCH] MIPS: Introduce irq_stack
Allocate a per-cpu irq stack for use within interrupt handlers.
Also add a utility function on_irq_stack to determine if a given stack
pointer is within the irq stack for that cpu.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -17,6 +17,18 @@
#include <irq.h>
+#define IRQ_STACK_SIZE THREAD_SIZE
+
+extern void *irq_stack[NR_CPUS];
+
+static inline bool on_irq_stack(int cpu, unsigned long sp)
+{
+ unsigned long low = (unsigned long)irq_stack[cpu];
+ unsigned long high = low + IRQ_STACK_SIZE;
+
+ return (low <= sp && sp <= high);
+}
+
#ifdef CONFIG_I8259
static inline int irq_canonicalize(int irq)
{
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -102,6 +102,7 @@ void output_thread_info_defines(void)
OFFSET(TI_REGS, thread_info, regs);
DEFINE(_THREAD_SIZE, THREAD_SIZE);
DEFINE(_THREAD_MASK, THREAD_MASK);
+ DEFINE(_IRQ_STACK_SIZE, IRQ_STACK_SIZE);
BLANK();
}
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -25,6 +25,8 @@
#include <linux/atomic.h>
#include <asm/uaccess.h>
+void *irq_stack[NR_CPUS];
+
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
@@ -58,6 +60,15 @@ void __init init_IRQ(void)
clear_c0_status(ST0_IM);
arch_init_irq();
+
+ for_each_possible_cpu(i) {
+ int irq_pages = IRQ_STACK_SIZE / PAGE_SIZE;
+ void *s = (void *)__get_free_pages(GFP_KERNEL, irq_pages);
+
+ irq_stack[i] = s;
+ pr_debug("CPU%d IRQ stack at 0x%p - 0x%p\n", i,
+ irq_stack[i], irq_stack[i] + IRQ_STACK_SIZE);
+ }
}
#ifdef CONFIG_DEBUG_STACKOVERFLOW

42
target/linux/generic/patches-4.9/040-02-MIPS-Stack-unwinding-while-on-IRQ-stack.patch
View File

@@ -1,42 +0,0 @@
From: Matt Redfearn <matt.redfearn@imgtec.com>
Date: Mon, 19 Dec 2016 14:20:57 +0000
Subject: [PATCH] MIPS: Stack unwinding while on IRQ stack
Within unwind stack, check if the stack pointer being unwound is within
the CPU's irq_stack and if so use that page rather than the task's stack
page.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -33,6 +33,7 @@
#include <asm/dsemul.h>
#include <asm/dsp.h>
#include <asm/fpu.h>
+#include <asm/irq.h>
#include <asm/msa.h>
#include <asm/pgtable.h>
#include <asm/mipsregs.h>
@@ -556,7 +557,19 @@ EXPORT_SYMBOL(unwind_stack_by_address);
unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
unsigned long pc, unsigned long *ra)
{
- unsigned long stack_page = (unsigned long)task_stack_page(task);
+ unsigned long stack_page = 0;
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ if (on_irq_stack(cpu, *sp)) {
+ stack_page = (unsigned long)irq_stack[cpu];
+ break;
+ }
+ }
+
+ if (!stack_page)
+ stack_page = (unsigned long)task_stack_page(task);
+
return unwind_stack_by_address(stack_page, sp, pc, ra);
}
#endif

48
target/linux/generic/patches-4.9/040-03-MIPS-Only-change-28-to-thread_info-if-coming-from-us.patch
View File

@@ -1,48 +0,0 @@
From: Matt Redfearn <matt.redfearn@imgtec.com>
Date: Mon, 19 Dec 2016 14:20:58 +0000
Subject: [PATCH] MIPS: Only change $28 to thread_info if coming from user
mode
The SAVE_SOME macro is used to save the execution context on all
exceptions.
If an exception occurs while executing user code, the stack is switched
to the kernel's stack for the current task, and register $28 is switched
to point to the current_thread_info, which is at the bottom of the stack
region.
If the exception occurs while executing kernel code, the stack is left,
and this change ensures that register $28 is not updated. This is the
correct behaviour when the kernel can be executing on the separate irq
stack, because the thread_info will not be at the base of it.
With this change, register $28 is only switched to it's kernel
conventional usage of the currrent thread info pointer at the point at
which execution enters kernel space. Doing it on every exception was
redundant, but OK without an IRQ stack, but will be erroneous once that
is introduced.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Maciej W. Rozycki <macro@imgtec.com>
---
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -216,12 +216,19 @@
LONG_S $25, PT_R25(sp)
LONG_S $28, PT_R28(sp)
LONG_S $31, PT_R31(sp)
+
+ /* Set thread_info if we're coming from user mode */
+ mfc0 k0, CP0_STATUS
+ sll k0, 3 /* extract cu0 bit */
+ bltz k0, 9f
+
ori $28, sp, _THREAD_MASK
xori $28, _THREAD_MASK
#ifdef CONFIG_CPU_CAVIUM_OCTEON
.set mips64
pref 0, 0($28) /* Prefetch the current pointer */
#endif
+9:
.set pop
.endm

116
target/linux/generic/patches-4.9/040-04-MIPS-Switch-to-the-irq_stack-in-interrupts.patch
View File

@@ -1,116 +0,0 @@
From: Matt Redfearn <matt.redfearn@imgtec.com>
Date: Mon, 19 Dec 2016 14:20:59 +0000
Subject: [PATCH] MIPS: Switch to the irq_stack in interrupts
When enterring interrupt context via handle_int or except_vec_vi, switch
to the irq_stack of the current CPU if it is not already in use.
The current stack pointer is masked with the thread size and compared to
the base or the irq stack. If it does not match then the stack pointer
is set to the top of that stack, otherwise this is a nested irq being
handled on the irq stack so the stack pointer should be left as it was.
The in-use stack pointer is placed in the callee saved register s1. It
will be saved to the stack when plat_irq_dispatch is invoked and can be
restored once control returns here.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -187,9 +187,44 @@ NESTED(handle_int, PT_SIZE, sp)
LONG_L s0, TI_REGS($28)
LONG_S sp, TI_REGS($28)
- PTR_LA ra, ret_from_irq
- PTR_LA v0, plat_irq_dispatch
- jr v0
+
+ /*
+ * SAVE_ALL ensures we are using a valid kernel stack for the thread.
+ * Check if we are already using the IRQ stack.
+ */
+ move s1, sp # Preserve the sp
+
+ /* Get IRQ stack for this CPU */
+ ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+ lui k1, %hi(irq_stack)
+#else
+ lui k1, %highest(irq_stack)
+ daddiu k1, %higher(irq_stack)
+ dsll k1, 16
+ daddiu k1, %hi(irq_stack)
+ dsll k1, 16
+#endif
+ LONG_SRL k0, SMP_CPUID_PTRSHIFT
+ LONG_ADDU k1, k0
+ LONG_L t0, %lo(irq_stack)(k1)
+
+ # Check if already on IRQ stack
+ PTR_LI t1, ~(_THREAD_SIZE-1)
+ and t1, t1, sp
+ beq t0, t1, 2f
+
+ /* Switch to IRQ stack */
+ li t1, _IRQ_STACK_SIZE
+ PTR_ADD sp, t0, t1
+
+2:
+ jal plat_irq_dispatch
+
+ /* Restore sp */
+ move sp, s1
+
+ j ret_from_irq
#ifdef CONFIG_CPU_MICROMIPS
nop
#endif
@@ -262,8 +297,44 @@ NESTED(except_vec_vi_handler, 0, sp)
LONG_L s0, TI_REGS($28)
LONG_S sp, TI_REGS($28)
- PTR_LA ra, ret_from_irq
- jr v0
+
+ /*
+ * SAVE_ALL ensures we are using a valid kernel stack for the thread.
+ * Check if we are already using the IRQ stack.
+ */
+ move s1, sp # Preserve the sp
+
+ /* Get IRQ stack for this CPU */
+ ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+ lui k1, %hi(irq_stack)
+#else
+ lui k1, %highest(irq_stack)
+ daddiu k1, %higher(irq_stack)
+ dsll k1, 16
+ daddiu k1, %hi(irq_stack)
+ dsll k1, 16
+#endif
+ LONG_SRL k0, SMP_CPUID_PTRSHIFT
+ LONG_ADDU k1, k0
+ LONG_L t0, %lo(irq_stack)(k1)
+
+ # Check if already on IRQ stack
+ PTR_LI t1, ~(_THREAD_SIZE-1)
+ and t1, t1, sp
+ beq t0, t1, 2f
+
+ /* Switch to IRQ stack */
+ li t1, _IRQ_STACK_SIZE
+ PTR_ADD sp, t0, t1
+
+2:
+ jal plat_irq_dispatch
+
+ /* Restore sp */
+ move sp, s1
+
+ j ret_from_irq
END(except_vec_vi_handler)
/*

21
target/linux/generic/patches-4.9/040-05-MIPS-Select-HAVE_IRQ_EXIT_ON_IRQ_STACK.patch
View File

@@ -1,21 +0,0 @@
From: Matt Redfearn <matt.redfearn@imgtec.com>
Date: Mon, 19 Dec 2016 14:21:00 +0000
Subject: [PATCH] MIPS: Select HAVE_IRQ_EXIT_ON_IRQ_STACK
Since do_IRQ is now invoked on a separate IRQ stack, we select
HAVE_IRQ_EXIT_ON_IRQ_STACK so that softirq's may be invoked directly
from irq_exit(), rather than requiring do_softirq_own_stack.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
---
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -9,6 +9,7 @@ config MIPS
select HAVE_CONTEXT_TRACKING
select HAVE_GENERIC_DMA_COHERENT
select HAVE_IDE
+ select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_OPROFILE
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC

35
target/linux/generic/patches-4.9/040-06-MIPS-IRQ-Stack-Fix-erroneous-jal-to-plat_irq_dispatc.patch
View File

@@ -1,35 +0,0 @@
From de856416e7143e32afc4849625616554aa060f7a Mon Sep 17 00:00:00 2001
From: Matt Redfearn <matt.redfearn@imgtec.com>
Date: Wed, 25 Jan 2017 17:00:25 +0000
Subject: [PATCH] MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
Commit dda45f701c9d ("MIPS: Switch to the irq_stack in interrupts")
changed both the normal and vectored interrupt handlers. Unfortunately
the vectored version, "except_vec_vi_handler", was incorrectly modified
to unconditionally jal to plat_irq_dispatch, rather than doing a jalr to
the vectored handler that has been set up. This is ok for many platforms
which set the vectored handler to plat_irq_dispatch anyway, but will
cause problems with platforms that use other handlers.
Fixes: dda45f701c9d ("MIPS: Switch to the irq_stack in interrupts")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15110/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
---
arch/mips/kernel/genex.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -329,7 +329,7 @@ NESTED(except_vec_vi_handler, 0, sp)
PTR_ADD sp, t0, t1
2:
- jal plat_irq_dispatch
+ jalr v0
/* Restore sp */
move sp, s1

40
target/linux/generic/patches-4.9/060-0001-mtd-bcm47xxpart-fix-parsing-first-block-after-aligne.patch
View File

@@ -1,40 +0,0 @@
From bd5d21310133921021d78995ad6346f908483124 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sun, 20 Nov 2016 16:09:30 +0100
Subject: [PATCH] mtd: bcm47xxpart: fix parsing first block after aligned TRX
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
After parsing TRX we should skip to the first block placed behind it.
Our code was working only with TRX with length not aligned to the
blocksize. In other cases (length aligned) it was missing the block
places right after TRX.
This fixes calculation and simplifies the comment.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/bcm47xxpart.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -229,12 +229,10 @@ static int bcm47xxpart_parse(struct mtd_
last_trx_part = curr_part - 1;
- /*
- * We have whole TRX scanned, skip to the next part. Use
- * roundown (not roundup), as the loop will increase
- * offset in next step.
- */
- offset = rounddown(offset + trx->length, blocksize);
+ /* Jump to the end of TRX */
+ offset = roundup(offset + trx->length, blocksize);
+ /* Next loop iteration will increase the offset */
+ offset -= blocksize;
continue;
}

2
target/linux/generic/patches-4.9/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
View File

@@ -75,7 +75,7 @@ Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5893,7 +5893,7 @@ static void __ref alloc_node_mem_map(str
@@ -5894,7 +5894,7 @@ static void __ref alloc_node_mem_map(str
mem_map = NODE_DATA(0)->node_mem_map;
#if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
if (page_to_pfn(mem_map) != pgdat->node_start_pfn)

4
target/linux/generic/patches-4.9/630-packet_socket_type.patch
View File

@@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (sock->type == SOCK_PACKET)
po->prot_hook.func = packet_rcv_spkt;
@@ -3813,6 +3816,16 @@ packet_setsockopt(struct socket *sock, i
@@ -3815,6 +3818,16 @@ packet_setsockopt(struct socket *sock, i
po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
return 0;
}
@@ -108,7 +108,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
default:
return -ENOPROTOOPT;
}
@@ -3865,6 +3878,13 @@ static int packet_getsockopt(struct sock
@@ -3867,6 +3880,13 @@ static int packet_getsockopt(struct sock
case PACKET_VNET_HDR:
val = po->has_vnet_hdr;
break;

22
target/linux/generic/patches-4.9/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
View File

@@ -302,7 +302,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
/**
* ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
* @t: the outgoing tunnel device
@@ -1281,6 +1421,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
@@ -1283,6 +1423,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
{
struct ip6_tnl *t = netdev_priv(dev);
struct ipv6hdr *ipv6h = ipv6_hdr(skb);
@@ -310,7 +310,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
int encap_limit = -1;
__u16 offset;
struct flowi6 fl6;
@@ -1336,6 +1477,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
@@ -1338,6 +1479,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
fl6.flowi6_mark = skb->mark;
}
@@ -329,7 +329,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
return -1;
@@ -1461,6 +1614,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
@@ -1463,6 +1616,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
t->parms.flowinfo = p->flowinfo;
t->parms.link = p->link;
t->parms.proto = p->proto;
@@ -344,7 +344,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
dst_cache_reset(&t->dst_cache);
ip6_tnl_link_config(t);
return 0;
@@ -1499,6 +1660,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
@@ -1501,6 +1662,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
p->flowinfo = u->flowinfo;
p->link = u->link;
p->proto = u->proto;
@@ -352,7 +352,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
memcpy(p->name, u->name, sizeof(u->name));
}
@@ -1876,6 +2038,15 @@ static int ip6_tnl_validate(struct nlatt
@@ -1878,6 +2040,15 @@ static int ip6_tnl_validate(struct nlatt
return 0;
}
@@ -368,7 +368,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
static void ip6_tnl_netlink_parms(struct nlattr *data[],
struct __ip6_tnl_parm *parms)
{
@@ -1910,6 +2081,46 @@ static void ip6_tnl_netlink_parms(struct
@@ -1912,6 +2083,46 @@ static void ip6_tnl_netlink_parms(struct
if (data[IFLA_IPTUN_COLLECT_METADATA])
parms->collect_md = true;
@@ -415,7 +415,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
}
static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
@@ -2019,6 +2230,12 @@ static void ip6_tnl_dellink(struct net_d
@@ -2021,6 +2232,12 @@ static void ip6_tnl_dellink(struct net_d
static size_t ip6_tnl_get_size(const struct net_device *dev)
{
@@ -428,7 +428,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
return
/* IFLA_IPTUN_LINK */
nla_total_size(4) +
@@ -2046,6 +2263,24 @@ static size_t ip6_tnl_get_size(const str
@@ -2048,6 +2265,24 @@ static size_t ip6_tnl_get_size(const str
nla_total_size(2) +
/* IFLA_IPTUN_COLLECT_METADATA */
nla_total_size(0) +
@@ -453,7 +453,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
0;
}
@@ -2053,6 +2288,9 @@ static int ip6_tnl_fill_info(struct sk_b
@@ -2055,6 +2290,9 @@ static int ip6_tnl_fill_info(struct sk_b
{
struct ip6_tnl *tunnel = netdev_priv(dev);
struct __ip6_tnl_parm *parm = &tunnel->parms;
@@ -463,7 +463,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
@@ -2061,9 +2299,27 @@ static int ip6_tnl_fill_info(struct sk_b
@@ -2063,9 +2301,27 @@ static int ip6_tnl_fill_info(struct sk_b
nla_put_u8(skb, IFLA_IPTUN_ENCAP_LIMIT, parm->encap_limit) ||
nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
@@ -492,7 +492,7 @@ Signed-off-by: Steven Barth <cyrus@openwrt.org>
if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
@@ -2101,6 +2357,7 @@ static const struct nla_policy ip6_tnl_p
@@ -2103,6 +2359,7 @@ static const struct nla_policy ip6_tnl_p
[IFLA_IPTUN_ENCAP_SPORT] = { .type = NLA_U16 },
[IFLA_IPTUN_ENCAP_DPORT] = { .type = NLA_U16 },
[IFLA_IPTUN_COLLECT_METADATA] = { .type = NLA_FLAG },

22
target/linux/generic/patches-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
View File

@@ -143,7 +143,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
static const struct rt6_info ip6_blk_hole_entry_template = {
.dst = {
.__refcnt = ATOMIC_INIT(1),
@@ -1953,6 +1970,11 @@ static struct rt6_info *ip6_route_info_c
@@ -1957,6 +1974,11 @@ static struct rt6_info *ip6_route_info_c
rt->dst.output = ip6_pkt_prohibit_out;
rt->dst.input = ip6_pkt_prohibit;
break;
@@ -155,7 +155,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
case RTN_THROW:
case RTN_UNREACHABLE:
default:
@@ -2594,6 +2616,17 @@ static int ip6_pkt_prohibit_out(struct n
@@ -2600,6 +2622,17 @@ static int ip6_pkt_prohibit_out(struct n
return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
}
@@ -173,7 +173,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
/*
* Allocate a dst for local (unicast / anycast) address.
*/
@@ -2829,7 +2862,8 @@ static int rtm_to_fib6_config(struct sk_
@@ -2835,7 +2868,8 @@ static int rtm_to_fib6_config(struct sk_
if (rtm->rtm_type == RTN_UNREACHABLE ||
rtm->rtm_type == RTN_BLACKHOLE ||
rtm->rtm_type == RTN_PROHIBIT ||
@@ -183,7 +183,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
cfg->fc_flags |= RTF_REJECT;
if (rtm->rtm_type == RTN_LOCAL)
@@ -3207,6 +3241,9 @@ static int rt6_fill_node(struct net *net
@@ -3213,6 +3247,9 @@ static int rt6_fill_node(struct net *net
case -EACCES:
rtm->rtm_type = RTN_PROHIBIT;
break;
@@ -193,7 +193,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
case -EAGAIN:
rtm->rtm_type = RTN_THROW;
break;
@@ -3480,6 +3517,8 @@ static int ip6_route_dev_notify(struct n
@@ -3489,6 +3526,8 @@ static int ip6_route_dev_notify(struct n
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
net->ipv6.ip6_prohibit_entry->dst.dev = dev;
net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
@@ -202,7 +202,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
#endif
@@ -3696,6 +3735,17 @@ static int __net_init ip6_route_net_init
@@ -3711,6 +3750,17 @@ static int __net_init ip6_route_net_init
net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
ip6_template_metrics, true);
@@ -220,7 +220,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
#endif
net->ipv6.sysctl.flush_delay = 0;
@@ -3714,6 +3764,8 @@ out:
@@ -3729,6 +3779,8 @@ out:
return ret;
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
@@ -229,7 +229,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
out_ip6_prohibit_entry:
kfree(net->ipv6.ip6_prohibit_entry);
out_ip6_null_entry:
@@ -3731,6 +3783,7 @@ static void __net_exit ip6_route_net_exi
@@ -3746,6 +3798,7 @@ static void __net_exit ip6_route_net_exi
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
kfree(net->ipv6.ip6_prohibit_entry);
kfree(net->ipv6.ip6_blk_hole_entry);
@@ -237,7 +237,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
#endif
dst_entries_destroy(&net->ipv6.ip6_dst_ops);
}
@@ -3828,6 +3881,9 @@ int __init ip6_route_init(void)
@@ -3819,6 +3872,9 @@ void __init ip6_route_init_special_entri
init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
@@ -245,5 +245,5 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+ init_net.ipv6.ip6_policy_failed_entry->rt6i_idev =
+ in6_dev_get(init_net.loopback_dev);
#endif
ret = fib6_init();
if (ret)
}

2
target/linux/generic/patches-4.9/701-phy_extension.patch
View File

@@ -53,7 +53,7 @@
* @phydev: the phy_device struct
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -812,6 +812,7 @@ int phy_ethtool_ksettings_get(struct phy
@@ -813,6 +813,7 @@ int phy_ethtool_ksettings_get(struct phy
struct ethtool_link_ksettings *cmd);
int phy_ethtool_ksettings_set(struct phy_device *phydev,
const struct ethtool_link_ksettings *cmd);

2
target/linux/generic/patches-4.9/710-phy-add-mdio_register_board_info.patch
View File

@@ -50,7 +50,7 @@
phy_device_free(phydev);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -855,6 +855,23 @@ void mdio_bus_exit(void);
@@ -856,6 +856,23 @@ void mdio_bus_exit(void);
extern struct bus_type mdio_bus_type;

6
target/linux/generic/patches-4.9/810-pci_disable_common_quirks.patch
View File

@@ -23,7 +23,7 @@
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
@@ -3016,6 +3017,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
@@ -3038,6 +3039,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
@@ -31,7 +31,7 @@
/*
* Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To
@@ -3072,6 +3074,8 @@ static void fixup_debug_report(struct pc
@@ -3094,6 +3096,8 @@ static void fixup_debug_report(struct pc
}
}
@@ -40,7 +40,7 @@
/*
* Some BIOS implementations leave the Intel GPU interrupts enabled,
* even though no one is handling them (f.e. i915 driver is never loaded).
@@ -3106,6 +3110,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
@@ -3128,6 +3132,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);

2
target/linux/generic/patches-4.9/904-debloat_dma_buf.patch
View File

@@ -32,7 +32,7 @@
#include <uapi/linux/dma-buf.h>
@@ -974,4 +975,5 @@ static void __exit dma_buf_deinit(void)
@@ -977,4 +978,5 @@ static void __exit dma_buf_deinit(void)
{
dma_buf_uninit_debugfs();
}

42
target/linux/imx6/patches-4.9/0003-mmc-sdhci-esdhc-imx-increase-the-pad-I-O-drive-stren.patch
View File

@@ -1,42 +0,0 @@
From 9f327845358d3dd0d8a5a7a5436b0aa5c432e757 Mon Sep 17 00:00:00 2001
From: Haibo Chen <haibo.chen@nxp.com>
Date: Wed, 19 Apr 2017 10:53:51 +0800
Subject: [PATCH] mmc: sdhci-esdhc-imx: increase the pad I/O drive strength for
DDR50 card
Currently for DDR50 card, it need tuning in default. We meet tuning fail
issue for DDR50 card and some data CRC error when DDR50 sd card works.
This is because the default pad I/O drive strength can't make sure DDR50
card work stable. So increase the pad I/O drive strength for DDR50 card,
and use pins_100mhz.
This fixes DDR50 card support for IMX since DDR50 tuning was enabled from
commit 9faac7b95ea4 ("mmc: sdhci: enable tuning for DDR50")
Tested-and-reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Cc: stable@vger.kernel.org # v4.4+
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 7123ef9..445fc47 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -830,6 +830,7 @@ static int esdhc_change_pinstate(struct sdhci_host *host,
switch (uhs) {
case MMC_TIMING_UHS_SDR50:
+ case MMC_TIMING_UHS_DDR50:
pinctrl = imx_data->pins_100mhz;
break;
case MMC_TIMING_UHS_SDR104:
--
2.7.4

2
target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch
View File

@@ -13,7 +13,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -489,4 +489,16 @@ config PHY_NS2_PCIE
@@ -490,4 +490,16 @@ config PHY_NS2_PCIE
help
Enable this to support the Broadcom Northstar2 PCIe PHY.
If unsure, say N.

2
target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
View File

@@ -45,7 +45,7 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
+ }
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -358,3 +358,12 @@ int __qcom_scm_pas_mss_reset(struct devi
@@ -365,3 +365,12 @@ int __qcom_scm_pas_mss_reset(struct devi
return ret ? : res.a1;
}

2
target/linux/lantiq/patches-4.9/0008-MIPS-lantiq-backport-old-timer-code.patch
View File

@@ -176,7 +176,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
-obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
+obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
obj-y += vmmc.o tffs.o
obj-y += vmmc.o
--- /dev/null
+++ b/arch/mips/lantiq/xway/timer.c

6
target/linux/lantiq/patches-4.9/0026-NET-multi-phy-support.patch
View File

@@ -11,7 +11,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1000,7 +1000,8 @@ void phy_state_machine(struct work_struc
@@ -1032,7 +1032,8 @@ void phy_state_machine(struct work_struc
/* If the link is down, give up on negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
@@ -21,7 +21,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
phydev->adjust_link(phydev->attached_dev);
break;
}
@@ -1083,7 +1084,8 @@ void phy_state_machine(struct work_struc
@@ -1115,7 +1116,8 @@ void phy_state_machine(struct work_struc
netif_carrier_on(phydev->attached_dev);
} else {
phydev->state = PHY_NOLINK;
@@ -31,7 +31,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
}
phydev->adjust_link(phydev->attached_dev);
@@ -1095,7 +1097,8 @@ void phy_state_machine(struct work_struc
@@ -1127,7 +1129,8 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;

2
target/linux/lantiq/patches-4.9/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
View File

@@ -29,7 +29,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+++ b/arch/mips/lantiq/xway/Makefile
@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o
obj-y += vmmc.o tffs.o
obj-y += vmmc.o
+obj-y += eth_mac.o
+obj-$(CONFIG_PCI) += ath5k_eep.o

6
target/linux/mediatek/patches-4.9/0001-NET-multi-phy-support.patch
View File

@@ -11,7 +11,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1000,7 +1000,8 @@ void phy_state_machine(struct work_struc
@@ -1032,7 +1032,8 @@ void phy_state_machine(struct work_struc
/* If the link is down, give up on negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
@@ -21,7 +21,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
phydev->adjust_link(phydev->attached_dev);
break;
}
@@ -1083,7 +1084,8 @@ void phy_state_machine(struct work_struc
@@ -1115,7 +1116,8 @@ void phy_state_machine(struct work_struc
netif_carrier_on(phydev->attached_dev);
} else {
phydev->state = PHY_NOLINK;
@@ -31,7 +31,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
}
phydev->adjust_link(phydev->attached_dev);
@@ -1095,7 +1097,8 @@ void phy_state_machine(struct work_struc
@@ -1127,7 +1129,8 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;

10
target/linux/mediatek/patches-4.9/00013-soc-mediatek-Add-MT2701-power-dt-bindings.patch
View File

@@ -16,10 +16,8 @@ Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2 files changed, 35 insertions(+), 5 deletions(-)
create mode 100644 include/dt-bindings/power/mt2701-power.h
Index: linux-4.9.14/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
===================================================================
--- linux-4.9.14.orig/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ linux-4.9.14/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -9,17 +9,20 @@ domain control.
The driver implements the Generic PM domain bindings described in
@@ -46,10 +44,8 @@ Index: linux-4.9.14/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
Optional properties:
- vdec-supply: Power supply for the vdec power domain
Index: linux-4.9.14/include/dt-bindings/power/mt2701-power.h
===================================================================
--- /dev/null
+++ linux-4.9.14/include/dt-bindings/power/mt2701-power.h
+++ b/include/dt-bindings/power/mt2701-power.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2015 MediaTek Inc.

19
target/linux/mediatek/patches-4.9/0014-soc-mediatek-Refine-scpsys-to-support-multiple-platf.patch
View File

@@ -12,8 +12,6 @@ Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
drivers/soc/mediatek/mtk-scpsys.c | 348 +++++++++++++++++++++++---------------
1 file changed, 210 insertions(+), 138 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 837effe19907..722aac80e611 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -11,17 +11,15 @@
@@ -181,7 +179,7 @@ index 837effe19907..722aac80e611 100644
struct genpd_onecell_data pd_data;
struct device *dev;
void __iomem *base;
@@ -408,57 +324,55 @@ static bool scpsys_active_wakeup(struct device *dev)
@@ -408,57 +324,55 @@ static bool scpsys_active_wakeup(struct
return scpd->data->active_wakeup;
}
@@ -262,7 +260,7 @@ index 837effe19907..722aac80e611 100644
struct scp_domain *scpd = &scp->domains[i];
const struct scp_domain_data *data = &scp_domain_data[i];
@@ -467,13 +381,15 @@ static int scpsys_probe(struct platform_device *pdev)
@@ -467,13 +381,15 @@ static int scpsys_probe(struct platform_
if (PTR_ERR(scpd->supply) == -ENODEV)
scpd->supply = NULL;
else
@@ -273,15 +271,15 @@ index 837effe19907..722aac80e611 100644
- pd_data->num_domains = NUM_DOMAINS;
+ pd_data->num_domains = num;
+
+ init_clks(pdev, clk);
- for (i = 0; i < NUM_DOMAINS; i++) {
+ init_clks(pdev, clk);
+
+ for (i = 0; i < num; i++) {
struct scp_domain *scpd = &scp->domains[i];
struct generic_pm_domain *genpd = &scpd->genpd;
const struct scp_domain_data *data = &scp_domain_data[i];
@@ -482,13 +398,37 @@ static int scpsys_probe(struct platform_device *pdev)
@@ -482,13 +398,37 @@ static int scpsys_probe(struct platform_
scpd->scp = scp;
scpd->data = data;
@@ -321,7 +319,7 @@ index 837effe19907..722aac80e611 100644
/*
* Initially turn on all domains to make the domains usable
@@ -507,6 +447,123 @@ static int scpsys_probe(struct platform_device *pdev)
@@ -507,6 +447,123 @@ static int scpsys_probe(struct platform_
* valid.
*/
@@ -445,7 +443,7 @@ index 837effe19907..722aac80e611 100644
ret = pm_genpd_add_subdomain(pd_data->domains[MT8173_POWER_DOMAIN_MFG_ASYNC],
pd_data->domains[MT8173_POWER_DOMAIN_MFG_2D]);
if (ret && IS_ENABLED(CONFIG_PM))
@@ -517,21 +574,36 @@ static int scpsys_probe(struct platform_device *pdev)
@@ -517,21 +574,36 @@ static int scpsys_probe(struct platform_
if (ret && IS_ENABLED(CONFIG_PM))
dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret);
@@ -486,6 +484,3 @@ index 837effe19907..722aac80e611 100644
static struct platform_driver scpsys_drv = {
.probe = scpsys_probe,
.driver = {
--
2.11.0

12
target/linux/mediatek/patches-4.9/0015-soc-mediatek-Add-MT2701-scpsys-driver.patch
View File

@@ -17,10 +17,8 @@ Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
drivers/soc/mediatek/mtk-scpsys.c | 117 +++++++++++++++++++++++++++++++++++++-
2 files changed, 117 insertions(+), 2 deletions(-)
Index: linux-4.9.14/drivers/soc/mediatek/Kconfig
===================================================================
--- linux-4.9.14.orig/drivers/soc/mediatek/Kconfig
+++ linux-4.9.14/drivers/soc/mediatek/Kconfig
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -23,7 +23,7 @@ config MTK_PMIC_WRAP
config MTK_SCPSYS
bool "MediaTek SCPSYS Support"
@@ -30,10 +28,8 @@ Index: linux-4.9.14/drivers/soc/mediatek/Kconfig
select REGMAP
select MTK_INFRACFG
select PM_GENERIC_DOMAINS if PM
Index: linux-4.9.14/drivers/soc/mediatek/mtk-scpsys.c
===================================================================
--- linux-4.9.14.orig/drivers/soc/mediatek/mtk-scpsys.c
+++ linux-4.9.14/drivers/soc/mediatek/mtk-scpsys.c
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -20,6 +20,7 @@
#include <linux/regulator/consumer.h>
#include <linux/soc/mediatek/infracfg.h>

16
target/linux/mediatek/patches-4.9/0071-pwm-add-pwm-mediatek.patch
View File

@@ -13,10 +13,8 @@ Signed-off-by: John Crispin <john@phrozen.org>
5 files changed, 279 insertions(+)
create mode 100644 drivers/pwm/pwm-mediatek.c
Index: linux-4.9.17/drivers/pwm/Kconfig
===================================================================
--- linux-4.9.17.orig/drivers/pwm/Kconfig
+++ linux-4.9.17/drivers/pwm/Kconfig
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -282,6 +282,15 @@ config PWM_MTK_DISP
To compile this driver as a module, choose M here: the module
will be called pwm-mtk-disp.
@@ -33,10 +31,8 @@ Index: linux-4.9.17/drivers/pwm/Kconfig
config PWM_MXS
tristate "Freescale MXS PWM support"
depends on ARCH_MXS && OF
Index: linux-4.9.17/drivers/pwm/Makefile
===================================================================
--- linux-4.9.17.orig/drivers/pwm/Makefile
+++ linux-4.9.17/drivers/pwm/Makefile
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
@@ -45,10 +41,8 @@ Index: linux-4.9.17/drivers/pwm/Makefile
obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
Index: linux-4.9.17/drivers/pwm/pwm-mediatek.c
===================================================================
--- /dev/null
+++ linux-4.9.17/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -0,0 +1,230 @@
+/*
+ * Mediatek Pulse Width Modulator driver

4
target/linux/mediatek/patches-4.9/0083-mfd-led3.patch
View File

@@ -26,11 +26,9 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
drivers/mfd/mt6397-core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index e14d8b0..8e601c8 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -48,6 +48,10 @@
@@ -48,6 +48,10 @@ static const struct mfd_cell mt6323_devs
.name = "mt6323-regulator",
.of_compatible = "mediatek,mt6323-regulator"
},

3
target/linux/mediatek/patches-4.9/0085-pmic-led0.patch
View File

@@ -26,9 +26,6 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6323.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
new file mode 100644
index 0000000..ac38472
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -0,0 +1,60 @@

4
target/linux/mediatek/patches-4.9/0086-pmic-led1.patch
View File

@@ -26,11 +26,9 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Documentation/devicetree/bindings/mfd/mt6397.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index c568d52..522a3bb 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -6,6 +6,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
@@ -6,6 +6,7 @@ MT6397/MT6323 is a multifunction device
- Audio codec
- GPIO
- Clock

10
target/linux/mediatek/patches-4.9/0087-pmic-led2.patch
View File

@@ -30,10 +30,8 @@ Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
3 files changed, 511 insertions(+)
create mode 100644 drivers/leds/leds-mt6323.c
Index: linux-4.9.17/drivers/leds/Kconfig
===================================================================
--- linux-4.9.17.orig/drivers/leds/Kconfig
+++ linux-4.9.17/drivers/leds/Kconfig
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -117,6 +117,14 @@ config LEDS_MIKROTIK_RB532
This option enables support for the so called "User LED" of
Mikrotik's Routerboard 532.
@@ -49,10 +47,8 @@ Index: linux-4.9.17/drivers/leds/Kconfig
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS
Index: linux-4.9.17/drivers/leds/leds-mt6323.c
===================================================================
--- /dev/null
+++ linux-4.9.17/drivers/leds/leds-mt6323.c
+++ b/drivers/leds/leds-mt6323.c
@@ -0,0 +1,502 @@
+/*
+ * LED driver for Mediatek MT6323 PMIC

4
target/linux/mediatek/patches-4.9/0088-pmic-led3.patch
View File

@@ -28,11 +28,9 @@ Acked-by: Lee Jones <lee.jones@linaro.org>
drivers/mfd/mt6397-core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 8e601c8..04a601f 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -47,8 +47,7 @@
@@ -47,8 +47,7 @@ static const struct mfd_cell mt6323_devs
{
.name = "mt6323-regulator",
.of_compatible = "mediatek,mt6323-regulator"

3
target/linux/mediatek/patches-4.9/0091-dsa1.patch
View File

@@ -27,9 +27,6 @@ Acked-by: Rob Herring <robh@kernel.org>
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/mt7530.txt
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
new file mode 100644
index 0000000..a9bc27b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -0,0 +1,92 @@

6
target/linux/mediatek/patches-4.9/0091-net-next-mediatek-fix-DQL-support.patch
View File

@@ -16,10 +16,8 @@ Signed-off-by: John Crispin <john@phrozen.org>
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 33 ++++++++++++++++-----------
1 file changed, 20 insertions(+), 13 deletions(-)
Index: linux-4.9.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
===================================================================
--- linux-4.9.14.orig/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ linux-4.9.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -706,7 +706,16 @@ static int mtk_tx_map(struct sk_buff *sk
WRITE_ONCE(itxd->txd3, (TX_DMA_SWC | TX_DMA_PLEN0(skb_headlen(skb)) |
(!nr_frags * TX_DMA_LS0)));

23
target/linux/mediatek/patches-4.9/0092-dsa2.patch
View File

@@ -36,11 +36,9 @@ Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
6 files changed, 127 insertions(+)
create mode 100644 net/dsa/tag_mtk.c
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 4e13e69..3276547 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -31,6 +31,7 @@ enum dsa_tag_protocol {
@@ -27,6 +27,7 @@ enum dsa_tag_protocol {
DSA_TAG_PROTO_EDSA,
DSA_TAG_PROTO_BRCM,
DSA_TAG_PROTO_QCA,
@@ -48,31 +46,25 @@ index 4e13e69..3276547 100644
DSA_TAG_LAST, /* MUST BE LAST */
};
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 9649238..d78789b 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -31,4 +31,6 @@ config NET_DSA_TAG_TRAILER
@@ -41,4 +41,6 @@ config NET_DSA_TAG_TRAILER
config NET_DSA_TAG_QCA
bool
+config NET_DSA_TAG_MTK
+ bool
endif
diff --git a/net/dsa/Makefile b/net/dsa/Makefile
index 31d3437..9b1d478 100644
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -8,3 +8,4 @@ dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
@@ -8,3 +8,4 @@ dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += ta
dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
dsa_core-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
dsa_core-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
+dsa_core-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index b6d4f6a..617f736 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -53,6 +53,9 @@ static struct sk_buff *dsa_slave_notag_xmit(struct sk_buff *skb,
@@ -57,6 +57,9 @@ const struct dsa_device_ops *dsa_device_
#ifdef CONFIG_NET_DSA_TAG_QCA
[DSA_TAG_PROTO_QCA] = &qca_netdev_ops,
#endif
@@ -82,11 +74,9 @@ index b6d4f6a..617f736 100644
[DSA_TAG_PROTO_NONE] = &none_ops,
};
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 0706a51..2a31399 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -85,4 +85,7 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent,
@@ -84,4 +84,7 @@ extern const struct dsa_device_ops brcm_
/* tag_qca.c */
extern const struct dsa_device_ops qca_netdev_ops;
@@ -94,9 +84,6 @@ index 0706a51..2a31399 100644
+extern const struct dsa_device_ops mtk_netdev_ops;
+
#endif
diff --git a/net/dsa/tag_mtk.c b/net/dsa/tag_mtk.c
new file mode 100644
index 0000000..833a9d6
--- /dev/null
+++ b/net/dsa/tag_mtk.c
@@ -0,0 +1,117 @@

6
target/linux/mediatek/patches-4.9/0092-dsa3.patch
View File

@@ -33,11 +33,9 @@ Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 9e75768..c21ed99 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1846,6 +1846,12 @@ static int mtk_hw_init(struct mtk_eth *eth)
@@ -1855,6 +1855,12 @@ static int mtk_hw_init(struct mtk_eth *e
/* GE2, Force 1000M/FD, FC ON */
mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(1));
@@ -50,8 +48,6 @@ index 9e75768..c21ed99 100644
/* Enable RX VLan Offloading */
mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 99b1c8e..996024d 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -70,6 +70,10 @@

4
target/linux/mediatek/patches-4.9/0092-dsa4.patch
View File

@@ -31,11 +31,9 @@ Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index c21ed99..84b09a4 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2323,6 +2323,8 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
@@ -2333,6 +2333,8 @@ static int mtk_add_mac(struct mtk_eth *e
eth->netdev[id]->ethtool_ops = &mtk_ethtool_ops;
eth->netdev[id]->irq = eth->irq[0];

16
target/linux/mediatek/patches-4.9/0092-dsa5.patch
View File

@@ -49,8 +49,6 @@ Signed-off-by: Landen Chao <Landen.Chao@mediatek.com>
create mode 100644 drivers/net/dsa/mt7530.c
create mode 100644 drivers/net/dsa/mt7530.h
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 0659846..5b322b4 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -34,4 +34,12 @@ config NET_DSA_QCA8K
@@ -66,21 +64,16 @@ index 0659846..5b322b4 100644
+ chip.
+
endmenu
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index a3c9416..8e629c1 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -2,6 +2,6 @@ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm-sf2.o
bcm-sf2-objs := bcm_sf2.o bcm_sf2_cfp.o
@@ -1,6 +1,6 @@
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
-
+obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
obj-y += b53/
obj-y += mv88e6xxx/
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
new file mode 100644
index 0000000..ad2e6f8
--- /dev/null
+++ b/drivers/net/dsa/mt7530.c
@@ -0,0 +1,1126 @@
@@ -1210,9 +1203,6 @@ index 0000000..ad2e6f8
+MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mediatek-mt7530");
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
new file mode 100644
index 0000000..05a612f
--- /dev/null
+++ b/drivers/net/dsa/mt7530.h
@@ -0,0 +1,390 @@

18
target/linux/mediatek/patches-4.9/0093-dsa-compat.patch
View File

@@ -1,7 +1,5 @@
Index: linux-4.9.17/drivers/net/dsa/mt7530.c
===================================================================
--- linux-4.9.17.orig/drivers/net/dsa/mt7530.c
+++ linux-4.9.17/drivers/net/dsa/mt7530.c
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -834,6 +834,7 @@ mt7530_port_bridge_join(struct dsa_switc
int i;
@@ -70,10 +68,8 @@ Index: linux-4.9.17/drivers/net/dsa/mt7530.c
}
static void
Index: linux-4.9.17/drivers/net/dsa/mt7530.h
===================================================================
--- linux-4.9.17.orig/drivers/net/dsa/mt7530.h
+++ linux-4.9.17/drivers/net/dsa/mt7530.h
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -379,6 +379,8 @@ struct mt7530_priv {
struct mt7530_port ports[MT7530_NUM_PORTS];
/* protect among processes for registers access*/
@@ -83,10 +79,8 @@ Index: linux-4.9.17/drivers/net/dsa/mt7530.h
};
struct mt7530_hw_stats {
Index: linux-4.9.17/net/dsa/tag_mtk.c
===================================================================
--- linux-4.9.17.orig/net/dsa/tag_mtk.c
+++ linux-4.9.17/net/dsa/tag_mtk.c
--- a/net/dsa/tag_mtk.c
+++ b/net/dsa/tag_mtk.c
@@ -35,7 +35,7 @@ static struct sk_buff *mtk_tag_xmit(stru
/* Build the tag after the MAC Source Address */
mtk_tag = skb->data + 2 * ETH_ALEN;

12
target/linux/mediatek/patches-4.9/0094-net-affinity.patch
View File

@@ -1,7 +1,5 @@
Index: linux-4.9.17/drivers/net/ethernet/mediatek/mtk_eth_soc.c
===================================================================
--- linux-4.9.17.orig/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ linux-4.9.17/drivers/net/ethernet/mediatek/mtk_eth_soc.c
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2459,15 +2459,23 @@ static int mtk_probe(struct platform_dev
goto err_deinit_hw;
}
@@ -26,10 +24,8 @@ Index: linux-4.9.17/drivers/net/ethernet/mediatek/mtk_eth_soc.c
err = mtk_mdio_init(eth);
if (err)
Index: linux-4.9.17/drivers/net/ethernet/mediatek/mtk_eth_soc.h
===================================================================
--- linux-4.9.17.orig/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ linux-4.9.17/drivers/net/ethernet/mediatek/mtk_eth_soc.h
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -539,6 +539,7 @@ struct mtk_eth {
struct net_device *netdev[MTK_MAX_DEVS];
struct mtk_mac *mac[MTK_MAX_DEVS];

12
target/linux/mediatek/patches-4.9/0095-ephy.patch
View File

@@ -1,7 +1,5 @@
Index: linux-4.9.20/drivers/net/dsa/mt7530.c
===================================================================
--- linux-4.9.20.orig/drivers/net/dsa/mt7530.c
+++ linux-4.9.20/drivers/net/dsa/mt7530.c
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -629,6 +629,11 @@ mt7530_setup(struct dsa_switch *ds)
val = mt7530_read(priv, MT7530_MHWTRAP);
val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
@@ -14,10 +12,8 @@ Index: linux-4.9.20/drivers/net/dsa/mt7530.c
mt7530_write(priv, MT7530_MHWTRAP, val);
/* Enable and reset MIB counters */
Index: linux-4.9.20/drivers/net/ethernet/mediatek/mtk_eth_soc.c
===================================================================
--- linux-4.9.20.orig/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ linux-4.9.20/drivers/net/ethernet/mediatek/mtk_eth_soc.c
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -221,6 +221,9 @@ static void mtk_phy_link_adjust(struct n
netif_carrier_on(dev);
else

30
target/linux/mediatek/patches-4.9/0096-dsa-multi-cpu.patch
View File

@@ -1,7 +1,5 @@
Index: linux-4.9.20/drivers/net/dsa/mt7530.c
===================================================================
--- linux-4.9.20.orig/drivers/net/dsa/mt7530.c
+++ linux-4.9.20/drivers/net/dsa/mt7530.c
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -996,15 +996,7 @@ err:
static enum dsa_tag_protocol
mtk_get_tag_protocol(struct dsa_switch *ds)
@@ -19,10 +17,8 @@ Index: linux-4.9.20/drivers/net/dsa/mt7530.c
}
static struct dsa_switch_ops mt7530_switch_ops = {
Index: linux-4.9.20/include/net/dsa.h
===================================================================
--- linux-4.9.20.orig/include/net/dsa.h
+++ linux-4.9.20/include/net/dsa.h
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -145,6 +145,8 @@ struct dsa_port {
struct device_node *dn;
unsigned int ageing_time;
@@ -72,10 +68,8 @@ Index: linux-4.9.20/include/net/dsa.h
struct switchdev_trans;
struct switchdev_obj;
struct switchdev_obj_port_fdb;
Index: linux-4.9.20/net/dsa/dsa2.c
===================================================================
--- linux-4.9.20.orig/net/dsa/dsa2.c
+++ linux-4.9.20/net/dsa/dsa2.c
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -248,8 +248,6 @@ static int dsa_cpu_port_apply(struct dev
return err;
}
@@ -151,10 +145,8 @@ Index: linux-4.9.20/net/dsa/dsa2.c
}
pr_info("DSA: switch %d %d parsed\n", dst->tree, ds->index);
Index: linux-4.9.20/net/dsa/dsa_priv.h
===================================================================
--- linux-4.9.20.orig/net/dsa/dsa_priv.h
+++ linux-4.9.20/net/dsa/dsa_priv.h
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -43,6 +43,7 @@ struct dsa_slave_priv {
int old_duplex;
@@ -163,10 +155,8 @@ Index: linux-4.9.20/net/dsa/dsa_priv.h
#ifdef CONFIG_NET_POLL_CONTROLLER
struct netpoll *netpoll;
#endif
Index: linux-4.9.20/net/dsa/slave.c
===================================================================
--- linux-4.9.20.orig/net/dsa/slave.c
+++ linux-4.9.20/net/dsa/slave.c
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -61,7 +61,7 @@ static int dsa_slave_get_iflink(const st
{
struct dsa_slave_priv *p = netdev_priv(dev);

6
target/linux/mediatek/patches-4.9/0097-dsa-mt7530.patch
View File

@@ -1,7 +1,5 @@
Index: linux-4.9.20/drivers/net/dsa/mt7530.c
===================================================================
--- linux-4.9.20.orig/drivers/net/dsa/mt7530.c
+++ linux-4.9.20/drivers/net/dsa/mt7530.c
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -627,7 +627,7 @@ mt7530_setup(struct dsa_switch *ds)
/* Enable Port 6 only; P5 as GMAC5 which currently is not supported */

2
target/linux/mpc85xx/patches-4.9/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
View File

@@ -1,6 +1,6 @@
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -33,6 +33,7 @@ static const struct of_device_id mpc85xx_common_ids[] __initconst = {
@@ -33,6 +33,7 @@ static const struct of_device_id mpc85xx
{ .compatible = "fsl,mpc8548-guts", },
/* Probably unnecessary? */
{ .compatible = "gpio-leds", },

4
target/linux/mpc85xx/patches-4.9/100-powerpc-85xx-tl-wdr4900-v1-support.patch
View File

@@ -17,7 +17,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -137,6 +137,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
@@ -137,6 +137,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
@@ -25,7 +25,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
src-wlib := $(sort $(src-wlib-y))
src-plat := $(sort $(src-plat-y))
@@ -320,6 +321,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm8555
@@ -320,6 +321,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm
image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548
image-$(CONFIG_KSI8560) += cuImage.ksi8560

18
target/linux/mvebu/patches-4.9/400-phy-provide-a-hook-for-link-up-link-down-events.patch
View File

@@ -16,7 +16,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -959,6 +959,16 @@ void phy_start(struct phy_device *phydev
@@ -991,6 +991,16 @@ void phy_start(struct phy_device *phydev
}
EXPORT_SYMBOL(phy_start);
@@ -33,7 +33,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
/**
* phy_state_machine - Handle the state machine
* @work: work_struct that describes the work to be done
@@ -1000,8 +1010,7 @@ void phy_state_machine(struct work_struc
@@ -1032,8 +1042,7 @@ void phy_state_machine(struct work_struc
/* If the link is down, give up on negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
@@ -43,7 +43,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
break;
}
@@ -1013,9 +1022,7 @@ void phy_state_machine(struct work_struc
@@ -1045,9 +1054,7 @@ void phy_state_machine(struct work_struc
/* If AN is done, we're running */
if (err > 0) {
phydev->state = PHY_RUNNING;
@@ -54,7 +54,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
} else if (0 == phydev->link_timeout--)
needs_aneg = true;
break;
@@ -1040,8 +1047,7 @@ void phy_state_machine(struct work_struc
@@ -1072,8 +1079,7 @@ void phy_state_machine(struct work_struc
}
}
phydev->state = PHY_RUNNING;
@@ -64,7 +64,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
}
break;
case PHY_FORCING:
@@ -1051,13 +1057,12 @@ void phy_state_machine(struct work_struc
@@ -1083,13 +1089,12 @@ void phy_state_machine(struct work_struc
if (phydev->link) {
phydev->state = PHY_RUNNING;
@@ -80,7 +80,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
break;
case PHY_RUNNING:
/* Only register a CHANGE if we are polling and link changed
@@ -1080,14 +1085,12 @@ void phy_state_machine(struct work_struc
@@ -1112,14 +1117,12 @@ void phy_state_machine(struct work_struc
if (phydev->link) {
phydev->state = PHY_RUNNING;
@@ -97,7 +97,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
if (phy_interrupt_is_valid(phydev))
err = phy_config_interrupt(phydev,
PHY_INTERRUPT_ENABLED);
@@ -1095,8 +1098,7 @@ void phy_state_machine(struct work_struc
@@ -1127,8 +1130,7 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;
@@ -107,7 +107,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
do_suspend = true;
}
break;
@@ -1116,11 +1118,11 @@ void phy_state_machine(struct work_struc
@@ -1148,11 +1150,11 @@ void phy_state_machine(struct work_struc
if (phydev->link) {
phydev->state = PHY_RUNNING;
@@ -121,7 +121,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
} else {
phydev->state = PHY_AN;
phydev->link_timeout = PHY_AN_TIMEOUT;
@@ -1132,11 +1134,11 @@ void phy_state_machine(struct work_struc
@@ -1164,11 +1166,11 @@ void phy_state_machine(struct work_struc
if (phydev->link) {
phydev->state = PHY_RUNNING;

2
target/linux/mvebu/patches-4.9/401-net-phy-move-phy-MMD-accessors-to-phy-core.c.patch
View File

@@ -24,7 +24,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1175,91 +1175,6 @@ void phy_mac_interrupt(struct phy_device
@@ -1207,91 +1207,6 @@ void phy_mac_interrupt(struct phy_device
}
EXPORT_SYMBOL(phy_mac_interrupt);

2
target/linux/mvebu/patches-4.9/403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch
View File

@@ -30,7 +30,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1311,11 +1311,16 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
@@ -1343,11 +1343,16 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
*/
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
{

2
target/linux/mvebu/patches-4.9/404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch
View File

@@ -12,7 +12,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1311,16 +1311,33 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
@@ -1343,16 +1343,33 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
*/
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
{

2
target/linux/mvebu/patches-4.9/405-net-phy-allow-EEE-with-SGMII-interface-modes.patch
View File

@@ -11,7 +11,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1195,6 +1195,7 @@ int phy_init_eee(struct phy_device *phyd
@@ -1227,6 +1227,7 @@ int phy_init_eee(struct phy_device *phyd
if ((phydev->duplex == DUPLEX_FULL) &&
((phydev->interface == PHY_INTERFACE_MODE_MII) ||
(phydev->interface == PHY_INTERFACE_MODE_GMII) ||

2
target/linux/mvebu/patches-4.9/408-net-phy-hook-up-clause-45-autonegotiation-restart.patch
View File

@@ -37,7 +37,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
/**
* phy_aneg_done - return auto-negotiation status
@@ -1407,3 +1425,14 @@ int phy_ethtool_set_link_ksettings(struc
@@ -1439,3 +1457,14 @@ int phy_ethtool_set_link_ksettings(struc
return phy_ethtool_ksettings_set(phydev, cmd);
}
EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);

2
target/linux/mvebu/patches-4.9/413-phy-export-phy_start_machine-for-phylink.patch
View File

@@ -12,7 +12,7 @@ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -580,6 +580,7 @@ void phy_start_machine(struct phy_device
@@ -612,6 +612,7 @@ void phy_start_machine(struct phy_device
{
queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, HZ);
}

6
target/linux/ramips/patches-4.9/0034-NET-multi-phy-support.patch
View File

@@ -11,7 +11,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1000,7 +1000,8 @@ void phy_state_machine(struct work_struc
@@ -1032,7 +1032,8 @@ void phy_state_machine(struct work_struc
/* If the link is down, give up on negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
@@ -21,7 +21,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
phydev->adjust_link(phydev->attached_dev);
break;
}
@@ -1083,7 +1084,8 @@ void phy_state_machine(struct work_struc
@@ -1115,7 +1116,8 @@ void phy_state_machine(struct work_struc
netif_carrier_on(phydev->attached_dev);
} else {
phydev->state = PHY_NOLINK;
@@ -31,7 +31,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
}
phydev->adjust_link(phydev->attached_dev);
@@ -1095,7 +1097,8 @@ void phy_state_machine(struct work_struc
@@ -1127,7 +1129,8 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;

21
target/linux/ramips/patches-4.9/200-rt3883-fix-pinctrl-typo.patch
View File

@@ -1,21 +0,0 @@
From 2583143af8111d430bdca0268b6cdb7ccc7c3f9d Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Fri, 13 Jan 2017 05:40:04 +0100
Subject: [PATCH] mips: ralink/rt3883: fix typo in pinctrl lna_g_func
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
arch/mips/ralink/rt3883.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -36,7 +36,7 @@ static struct rt2880_pmx_func uartlite_f
static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
-static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) };
+static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) };
static struct rt2880_pmx_func pci_func[] = {
FUNC("pci-dev", 0, 40, 32),
FUNC("pci-host2", 1, 40, 32),

6
target/linux/x86/patches-4.9/800-hwmon-w83627ehf-dont-claim-nct677x.patch
View File

@@ -1,8 +1,6 @@
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 697007afb99c..4a4e0b4c077c 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -2707,8 +2707,8 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
@@ -2707,8 +2707,8 @@ static int __init w83627ehf_find(int sio
static const char sio_name_W83627UHG[] __initconst = "W83627UHG";
static const char sio_name_W83667HG[] __initconst = "W83667HG";
static const char sio_name_W83667HG_B[] __initconst = "W83667HG-B";
@@ -13,7 +11,7 @@ index 697007afb99c..4a4e0b4c077c 100644
u16 val;
const char *sio_name;
@@ -2749,14 +2749,14 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
@@ -2749,14 +2749,14 @@ static int __init w83627ehf_find(int sio
sio_data->kind = w83667hg_b;
sio_name = sio_name_W83667HG_B;
break;