ramips: add support for SNR-CPE-ME1
SNR-CPE-ME1 is a wireless WiFi 5 router manufactured by SNR/NAG company.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 256 MiB
- Flash : SPI-NOR 16 MiB (GD25Q128CSIG)
- WLAN : 2.4 GHz (MediaTek MT7603EN)
5 GHz (MediaTek MT7610EN)
- Ethernet : 10/100/1000 Mbps x5
- Switch : MediaTek MT7530 (in SoC)
- USB : 3.0 x1
- UART : through-hole on PCB
- [J4] 3.3V, RX, TX, GND (57600n8)
- Power : 12 VDC, 2 A
Flash instruction via TFTP:
1. Boot SNR-CPE-ME1 to recovery mode
(hold the reset button while power on)
2. Send firmware via TFTP client:
TFTP Server address: 192.168.1.1
TFTP Client address: 192.168.1.131
3. Wait ~120 seconds to complete flashing
4. Do sysupgrade using web-interface
Signed-off-by: Maximilian Weinmann <x1@disroot.org>
This commit is contained in:
Maximilian Weinmann
committed by
Hauke Mehrtens
Hauke Mehrtens
parent
1108f6cb8b
commit
ecdb24814f
@@ -87,6 +87,7 @@ linksys,ea8100-v2|\
|
||||
mts,wg430223)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
|
||||
;;
|
||||
snr,snr-cpe-me1|\
|
||||
snr,snr-cpe-me2-sfp|\
|
||||
snr,cpe-w4n-mt)
|
||||
idx="$(find_mtd_index uboot-env)"
|
||||
|
||||
212
target/linux/ramips/dts/mt7621_snr-cpe-me1.dts
Normal file
212
target/linux/ramips/dts/mt7621_snr-cpe-me1.dts
Normal file
@@ -0,0 +1,212 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "snr,snr-cpe-me1", "mediatek,mt7621-soc";
|
||||
model = "SNR-CPE-ME1";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac1;
|
||||
|
||||
led-boot = &led_usb;
|
||||
led-failsafe = &led_vpn;
|
||||
led-running = &led_green;
|
||||
led-upgrade = &led_sys;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_usb: led-0 { // USB Activity
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_USB;
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>; // [JTAG] JTDO
|
||||
};
|
||||
|
||||
led_vpn: led-1 { // VPN Activity
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>; // [JTAG] JTCLK
|
||||
};
|
||||
|
||||
led_sys: led-2 { // System config
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>; // [I2C] I2C_SD
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
led_green: led-3 { // ? LED
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>; // [JTAG] JTMS
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset Button";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>; // [JTAG] JTDI
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
reg_usb_vbus: regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_e000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
phy-handle = <ðphy4>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_e006>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
ethphy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 { // MT7603EN
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 { // MT7610EN
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 { // GD25Q128CSIG
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <44000000>; // 44 MHz
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Bootloader";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "Config";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "Factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_e000: macaddr@e000 {
|
||||
reg = <0xe000 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_e006: macaddr@e006 {
|
||||
reg = <0xe006 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "openwrt,uimage", "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xfb0000>;
|
||||
};
|
||||
|
||||
partition@30001 {
|
||||
label = "uboot-env";
|
||||
reg = <0x30000 0x1000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "jtag";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
vbus-supply = <®_usb_vbus>;
|
||||
vusb33-supply = <®_3p3v>;
|
||||
};
|
||||
@@ -2031,6 +2031,18 @@ define Device/sim_simax1800t
|
||||
endef
|
||||
TARGET_DEVICES += sim_simax1800t
|
||||
|
||||
define Device/snr_snr-cpe-me1
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
IMAGE_SIZE := 15040k
|
||||
DEVICE_VENDOR := SNR
|
||||
DEVICE_MODEL := SNR-CPE-ME1
|
||||
UIMAGE_NAME := SNR-CPE-ME1-5GHZ-MT
|
||||
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x0e kmod-usb3 \
|
||||
kmod-usb-ledtrig-usbport uboot-envtools
|
||||
endef
|
||||
TARGET_DEVICES += snr_snr-cpe-me1
|
||||
|
||||
define Device/snr_snr-cpe-me2-lite
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
|
||||
@@ -163,6 +163,9 @@ oraybox,x3a)
|
||||
ucidef_set_led_netdev "wan" "wan link" "red:status" "wan"
|
||||
ucidef_set_led_netdev "lan" "lan link" "green:status" "br-lan"
|
||||
;;
|
||||
snr,snr-cpe-me1)
|
||||
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
|
||||
;;
|
||||
tplink,archer-a6-v3|\
|
||||
tplink,archer-ax23-v1|\
|
||||
tplink,archer-c6-v3|\
|
||||
|
||||
Reference in New Issue
Block a user