ipq806x: NSS Hardware Offloading dts patch
This commit is contained in:
ACwifidude
@@ -0,0 +1,628 @@
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -1279,6 +1279,12 @@
|
||||
snps,blen = <16 0 0 0 0 0 0>;
|
||||
};
|
||||
|
||||
+ nss-gmac-common {
|
||||
+ compatible = "qcom,nss-gmac-common";
|
||||
+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
|
||||
+ reg-names = "nss_reg_base", "qsgmii_reg_base", "clk_ctl_base";
|
||||
+ };
|
||||
+
|
||||
gmac0: ethernet@37000000 {
|
||||
device_type = "network";
|
||||
compatible = "qcom,ipq806x-gmac", "snps,dwmac";
|
||||
@@ -1489,6 +1495,131 @@
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
+ nss0: nss@40000000 {
|
||||
+ compatible = "qcom,nss";
|
||||
+ qcom,low-frequency = <733000000>; /* orig value 110000000 */
|
||||
+ qcom,mid-frequency = <733000000>; /* orig value 550000000 */
|
||||
+ qcom,max-frequency = <733000000>;
|
||||
+
|
||||
+ interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
|
||||
+ <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ reg = <0x36000000 0x1000 0x39000000 0x10000>;
|
||||
+ reg-names = "nphys", "vphys";
|
||||
+ clocks = <&gcc NSS_CORE_CLK>, <&gcc NSSTCM_CLK_SRC>,
|
||||
+ <&gcc NSSTCM_CLK>, <&rpmcc RPM_NSS_FABRIC_0_CLK>,
|
||||
+ <&rpmcc RPM_NSS_FABRIC_1_CLK>;
|
||||
+ clock-names = "nss-core-clk", "nss-tcm-src",
|
||||
+ "nss-tcm-clk", "nss-fab0-clk",
|
||||
+ "nss-fab1-clk";
|
||||
+ resets = <&gcc UBI32_CORE1_CLKRST_CLAMP_RESET>,
|
||||
+ <&gcc UBI32_CORE1_CLAMP_RESET>,
|
||||
+ <&gcc UBI32_CORE1_AHB_RESET>,
|
||||
+ <&gcc UBI32_CORE1_AXI_RESET>;
|
||||
+ reset-names = "clkrst-clamp", "clamp", "ahb", "axi";
|
||||
+
|
||||
+ qcom,id = <0>;
|
||||
+ qcom,num-irq = <2>;
|
||||
+ qcom,num-queue = <2>;
|
||||
+ qcom,load-addr = <0x40000000>;
|
||||
+ qcom,turbo-frequency;
|
||||
+
|
||||
+ qcom,bridge-enabled;
|
||||
+ qcom,gre-enabled;
|
||||
+ qcom,gre-redir-enabled;
|
||||
+ qcom,gre_tunnel_enabled;
|
||||
+ qcom,ipv4-enabled;
|
||||
+ qcom,ipv4-reasm-enabled;
|
||||
+ qcom,ipv6-enabled;
|
||||
+ qcom,ipv6-reasm-enabled;
|
||||
+ qcom,l2tpv2-enabled;
|
||||
+ qcom,map-t-enabled;
|
||||
+ qcom,pppoe-enabled;
|
||||
+ qcom,pptp-enabled;
|
||||
+ qcom,portid-enabled;
|
||||
+ qcom,shaping-enabled;
|
||||
+ qcom,tun6rd-enabled;
|
||||
+ qcom,tunipip6-enabled;
|
||||
+ qcom,vlan-enabled;
|
||||
+ qcom,wlan-dataplane-offload-enabled;
|
||||
+ qcom,wlanredirect-enabled;
|
||||
+ qcom,pxvlan-enabled;
|
||||
+ qcom,vxlan-enabled;
|
||||
+ qcom,match-enabled;
|
||||
+ qcom,mirror-enabled;
|
||||
+ qcom,rmnet-enabled;
|
||||
+ qcom,clmap-enabled;
|
||||
+ };
|
||||
+
|
||||
+ nss1: nss@40800000 {
|
||||
+ compatible = "qcom,nss";
|
||||
+ qcom,low-frequency = <733000000>; /* orig value 110000000 */
|
||||
+ qcom,mid-frequency = <733000000>; /* orig value 550000000 */
|
||||
+ qcom,max-frequency = <733000000>;
|
||||
+
|
||||
+ interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
|
||||
+ <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ reg = <0x36400000 0x1000 0x39010000 0x10000>;
|
||||
+ reg-names = "nphys", "vphys";
|
||||
+ resets = <&gcc UBI32_CORE2_CLKRST_CLAMP_RESET>,
|
||||
+ <&gcc UBI32_CORE2_CLAMP_RESET>,
|
||||
+ <&gcc UBI32_CORE2_AHB_RESET>,
|
||||
+ <&gcc UBI32_CORE2_AXI_RESET>;
|
||||
+ reset-names = "clkrst-clamp", "clamp", "ahb", "axi";
|
||||
+
|
||||
+ qcom,id = <1>;
|
||||
+ qcom,num-irq = <2>;
|
||||
+ qcom,load-addr = <0x40800000>;
|
||||
+ qcom,num-queue = <2>;
|
||||
+ qcom,turbo-frequency;
|
||||
+
|
||||
+ qcom,capwap-enabled;
|
||||
+ qcom,crypto-enabled;
|
||||
+ qcom,dtls-enabled;
|
||||
+ qcom,ipsec-enabled;
|
||||
+ };
|
||||
+
|
||||
+ crypto1: crypto@38000000 {
|
||||
+ compatible = "qcom,nss-crypto";
|
||||
+ reg = <0x38000000 0x20000>, <0x38004000 0x22000>;
|
||||
+ reg-names = "crypto_pbase", "bam_base";
|
||||
+ clocks = <&gcc CE5_CORE_CLK>, <&gcc CE5_A_CLK>, <&gcc CE5_H_CLK>;
|
||||
+ clock-names = "ce5_core", "ce5_aclk", "ce5_hclk";
|
||||
+ resets = <&gcc CRYPTO_ENG1_RESET>, <&gcc CRYPTO_AHB_RESET>;
|
||||
+ reset-names = "rst_eng", "rst_ahb";
|
||||
+ qcom,id = <0>;
|
||||
+ qcom,ee = <0>;
|
||||
+ };
|
||||
+
|
||||
+ crypto2: crypto@38400000 {
|
||||
+ compatible = "qcom,nss-crypto";
|
||||
+ reg = <0x38400000 0x20000>, <0x38404000 0x22000>;
|
||||
+ reg-names = "crypto_pbase", "bam_base";
|
||||
+ resets = <&gcc CRYPTO_ENG2_RESET>;
|
||||
+ reset-names = "rst_eng";
|
||||
+ qcom,id = <1>;
|
||||
+ qcom,ee = <0>;
|
||||
+ };
|
||||
+
|
||||
+ crypto3: crypto@38800000 {
|
||||
+ compatible = "qcom,nss-crypto";
|
||||
+ reg = <0x38800000 0x20000>, <0x38804000 0x22000>;
|
||||
+ reg-names = "crypto_pbase", "bam_base";
|
||||
+ resets = <&gcc CRYPTO_ENG3_RESET>;
|
||||
+ reset-names = "rst_eng";
|
||||
+ qcom,id = <2>;
|
||||
+ qcom,ee = <0>;
|
||||
+ };
|
||||
+
|
||||
+ crypto4: crypto@38c00000 {
|
||||
+ compatible = "qcom,nss-crypto";
|
||||
+ reg = <0x38c00000 0x20000>, <0x38c04000 0x22000>;
|
||||
+ reg-names = "crypto_pbase", "bam_base";
|
||||
+ resets = <&gcc CRYPTO_ENG4_RESET>;
|
||||
+ reset-names = "rst_eng";
|
||||
+ qcom,id = <3>;
|
||||
+ qcom,ee = <0>;
|
||||
+ };
|
||||
+
|
||||
sdcc1bam: dma@12402000 {
|
||||
compatible = "qcom,bam-v1.3.0";
|
||||
reg = <0x12402000 0x8000>;
|
||||
@@ -1554,6 +1685,20 @@
|
||||
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
+
|
||||
+ nss-common {
|
||||
+ compatible = "qcom,nss-common";
|
||||
+ reg = <0x03000000 0x00001000>;
|
||||
+ reg-names = "nss_fpb_base";
|
||||
+ clocks = <&gcc NSS_CORE_CLK>, <&gcc NSSTCM_CLK>,
|
||||
+ <&rpmcc RPM_NSS_FABRIC_0_CLK>, <&rpmcc RPM_NSS_FABRIC_1_CLK>;
|
||||
+ clock-names = "nss_core_clk", "nss_tcm_clk",
|
||||
+ "nss-fab0-clk", "nss-fab1-clk";
|
||||
+ nss_core-supply = <&smb208_s1b>;
|
||||
+ nss_core_vdd_nominal = <1100000>;
|
||||
+ nss_core_vdd_high = <1150000>;
|
||||
+ nss_core_threshold_freq = <733000000>;
|
||||
+ };
|
||||
};
|
||||
|
||||
sfpb_mutex: hwlock@1200600 {
|
||||
@@ -1564,3 +1709,27 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ &gmac1 {
|
||||
+ compatible = "qcom,nss-gmac";
|
||||
+ qcom,id = <0>;
|
||||
+ qcom,pcs-chanid = <0>;
|
||||
+ qcom,phy_mii_type = <0>;
|
||||
+ qcom,emulation = <0>;
|
||||
+ qcom,forced-speed = <1000>;
|
||||
+ qcom,forced-duplex = <1>;
|
||||
+ qcom,socver = <0>;
|
||||
+ mdiobus = <&mdio0>;
|
||||
+ };
|
||||
+
|
||||
+ &gmac2 {
|
||||
+ compatible = "qcom,nss-gmac";
|
||||
+ qcom,id = <1>;
|
||||
+ qcom,pcs-chanid = <1>;
|
||||
+ qcom,phy_mii_type = <1>;
|
||||
+ qcom,emulation = <0>;
|
||||
+ qcom,forced-speed = <1000>;
|
||||
+ qcom,forced-duplex = <1>;
|
||||
+ qcom,socver = <0>;
|
||||
+ mdiobus = <&mdio0>;
|
||||
+ };
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
|
||||
@@ -22,6 +22,15 @@
|
||||
reg = <0x41200000 0x300000>;
|
||||
no-map;
|
||||
};
|
||||
+
|
||||
+ ramoops@42100000 {
|
||||
+ compatible = "ramoops";
|
||||
+ reg = <0x42100000 0x40000>;
|
||||
+ record-size = <0x4000>;
|
||||
+ console-size = <0x4000>;
|
||||
+ ftrace-size = <0x4000>;
|
||||
+ pmsg-size = <0x4000>;
|
||||
+ };
|
||||
};
|
||||
};
|
||||
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
|
||||
@@ -170,10 +170,17 @@
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
>;
|
||||
};
|
||||
+
|
||||
+ phy4: ethernet-phy@4 {
|
||||
+ reg = <4>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <0>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <1>;
|
||||
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
@@ -189,6 +196,9 @@
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <4>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <0>;
|
||||
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
|
||||
@@ -111,18 +111,3 @@
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
-
|
||||
-&gmac1 {
|
||||
- qcom,phy_mdio_addr = <4>;
|
||||
- qcom,poll_required = <1>;
|
||||
- qcom,rgmii_delay = <0>;
|
||||
- qcom,emulation = <0>;
|
||||
-};
|
||||
-
|
||||
-/* LAN */
|
||||
-&gmac2 {
|
||||
- qcom,phy_mdio_addr = <0>; /* none */
|
||||
- qcom,poll_required = <0>; /* no polling */
|
||||
- qcom,rgmii_delay = <0>;
|
||||
- qcom,emulation = <0>;
|
||||
-};
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi
|
||||
@@ -330,6 +330,9 @@
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <4>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <1>;
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
@@ -348,6 +351,9 @@
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <0>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <0>;
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
|
||||
@@ -258,6 +258,9 @@
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <4>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <1>;
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
@@ -275,6 +278,9 @@
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <0>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <0>;
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
|
||||
@@ -341,6 +341,9 @@
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <4>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <1>;
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
@@ -358,6 +361,9 @@
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <0>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <0>;
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
|
||||
@@ -344,6 +344,9 @@
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <4>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <1>;
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
@@ -361,6 +364,9 @@
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <0>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <0>;
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-g10.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-g10.dts
|
||||
@@ -122,12 +122,24 @@
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
-
|
||||
- pinctrl-0 = <&rgmii2_pins>;
|
||||
- pinctrl-names = "default";
|
||||
-
|
||||
+ compatible = "qcom,nss-gmac";
|
||||
+ reg = <0x37200000 0x200000>;
|
||||
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
+ qcom,pcs-chanid = <0>;
|
||||
+ qcom,phy-mdio-addr = <4>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <1>;
|
||||
+ qcom,phy_mii_type = <0>;
|
||||
+ qcom,emulation = <0>;
|
||||
+ qcom,forced-speed = <1000>;
|
||||
+ qcom,forced-duplex = <1>;
|
||||
+ qcom,socver = <0>;
|
||||
+ qcom,irq = <255>;
|
||||
+ mdiobus = <&mdio0>;
|
||||
+ pinctrl-0 = <&rgmii2_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
@@ -137,9 +149,22 @@
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
-
|
||||
+ compatible = "qcom,nss-gmac";
|
||||
+ reg = <0x37400000 0x200000>;
|
||||
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
+ qcom,pcs-chanid = <1>;
|
||||
+ qcom,phy-mdio-addr = <0>;
|
||||
+ qcom,poll-required = <0>; /* no polling */
|
||||
+ qcom,rgmii-delay = <0>;
|
||||
+ qcom,phy_mii_type = <1>;
|
||||
+ qcom,emulation = <0>;
|
||||
+ qcom,forced-speed = <1000>;
|
||||
+ qcom,forced-duplex = <1>;
|
||||
+ qcom,socver = <0>;
|
||||
+ qcom,irq = <258>;
|
||||
+ mdiobus = <&mdio0>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
@@ -154,6 +179,9 @@
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <4>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <1>;
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
@@ -224,10 +252,14 @@
|
||||
*/
|
||||
};
|
||||
};
|
||||
+
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
+ qcom,phy-mdio-addr = <0>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <0>;
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
@@ -261,6 +293,7 @@
|
||||
qcom,ath10k-calibration-variant = "ASRock-G10";
|
||||
};
|
||||
};
|
||||
+
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8065.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi
|
||||
@@ -95,3 +95,15 @@
|
||||
opp-level = <2>;
|
||||
};
|
||||
};
|
||||
+
|
||||
+ &nss0 {
|
||||
+ qcom,low-frequency = <800000000>;
|
||||
+ qcom,mid-frequency = <800000000>;
|
||||
+ qcom,max-frequency = <800000000>;
|
||||
+ };
|
||||
+
|
||||
+ &nss1 {
|
||||
+ qcom,low-frequency = <800000000>;
|
||||
+ qcom,mid-frequency = <800000000>;
|
||||
+ qcom,max-frequency = <800000000>;
|
||||
+ };
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi
|
||||
@@ -344,14 +344,23 @@
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
-
|
||||
+ compatible = "qcom,nss-gmac";
|
||||
+ reg = <0x37200000 0x200000>;
|
||||
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
+ qcom,pcs-chanid = <0>;
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <0>;
|
||||
qcom,rgmii_delay = <1>;
|
||||
+ qcom,phy-mdio-addr = <4>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <1>;
|
||||
qcom,phy_mii_type = <0>;
|
||||
qcom,emulation = <0>;
|
||||
+ qcom,forced-speed = <1000>;
|
||||
+ qcom,forced-duplex = <1>;
|
||||
+ qcom,socver = <0>;
|
||||
qcom,irq = <255>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
@@ -369,14 +378,23 @@
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
-
|
||||
+ compatible = "qcom,nss-gmac";
|
||||
+ reg = <0x37400000 0x200000>;
|
||||
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
+ qcom,pcs-chanid = <1>;
|
||||
qcom,phy_mdio_addr = <0>; /* none */
|
||||
qcom,poll_required = <0>; /* no polling */
|
||||
qcom,rgmii_delay = <0>;
|
||||
+ qcom,phy-mdio-addr = <0>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <0>;
|
||||
qcom,phy_mii_type = <1>;
|
||||
qcom,emulation = <0>;
|
||||
+ qcom,forced-speed = <1000>;
|
||||
+ qcom,forced-duplex = <1>;
|
||||
+ qcom,socver = <0>;
|
||||
qcom,irq = <258>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
|
||||
@@ -89,3 +89,16 @@
|
||||
reg = <0x6080000 0x1f80000>;
|
||||
};
|
||||
};
|
||||
+
|
||||
+&gmac1 {
|
||||
+ qcom,phy-mdio-addr = <0>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <1>;
|
||||
+};
|
||||
+
|
||||
+/* LAN */
|
||||
+&gmac2 {
|
||||
+ qcom,phy-mdio-addr = <4>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <0>;
|
||||
+};
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
|
||||
@@ -311,10 +311,28 @@
|
||||
0x00054 0xc832c832 /* LED_CTRL_1 */
|
||||
>;
|
||||
};
|
||||
+
|
||||
+ phy4: ethernet-phy@4 {
|
||||
+ reg = <4>;
|
||||
+ qca,ar8327-initvals = <
|
||||
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
+ 0x0000c 0x80 /* PAD6_MODE */
|
||||
+ >;
|
||||
+ };
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
status = "okay";
|
||||
+ compatible = "qcom,nss-gmac";
|
||||
+ qcom,id = <0>;
|
||||
+ qcom,pcs-chanid = <0>;
|
||||
+ qcom,phy-mdio-addr = <4>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <1>;
|
||||
+ qcom,forced-speed = <1000>;
|
||||
+ qcom,forced-duplex = <1>;
|
||||
+ mdiobus = <&mdio0>;
|
||||
+ qcom,socver = <0>;
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <0>;
|
||||
|
||||
@@ -332,6 +350,16 @@
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
+ compatible = "qcom,nss-gmac";
|
||||
+ qcom,id = <1>;
|
||||
+ qcom,pcs-chanid = <1>;
|
||||
+ qcom,phy-mdio-addr = <0>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <0>;
|
||||
+ qcom,forced-speed = <1000>;
|
||||
+ qcom,forced-duplex = <1>;
|
||||
+ mdiobus = <&mdio0>;
|
||||
+ qcom,socver = <0>;
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <1>;
|
||||
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
|
||||
@@ -268,13 +268,23 @@
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
+ compatible = "qcom,nss-gmac";
|
||||
+ reg = <0x37200000 0x200000>;
|
||||
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
+ qcom,pcs-chanid = <0>;
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <0>;
|
||||
qcom,rgmii_delay = <1>;
|
||||
+ qcom,phy-mdio-addr = <4>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <1>;
|
||||
qcom,phy_mii_type = <0>;
|
||||
qcom,emulation = <0>;
|
||||
+ qcom,forced-speed = <1000>;
|
||||
+ qcom,forced-duplex = <1>;
|
||||
+ qcom,socver = <0>;
|
||||
qcom,irq = <255>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
@@ -289,13 +299,23 @@
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
+ compatible = "qcom,nss-gmac";
|
||||
+ reg = <0x37400000 0x200000>;
|
||||
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
+ qcom,pcs-chanid = <1>;
|
||||
qcom,phy_mdio_addr = <0>; /* none */
|
||||
qcom,poll_required = <0>; /* no polling */
|
||||
qcom,rgmii_delay = <0>;
|
||||
+ qcom,phy-mdio-addr = <0>;
|
||||
+ qcom,poll-required = <0>;
|
||||
+ qcom,rgmii-delay = <0>;
|
||||
qcom,phy_mii_type = <1>;
|
||||
qcom,emulation = <0>;
|
||||
+ qcom,forced-speed = <1000>;
|
||||
+ qcom,forced-duplex = <1>;
|
||||
+ qcom,socver = <0>;
|
||||
qcom,irq = <258>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
Reference in New Issue
Block a user