mediatek: mt7622-bananapi-bpi-r64-rootdisk rebase to upstream dts
simplify maintaining mt7622-bananapi-bpi-r64-rootdisk.dts by storing only differences between upstream dts Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
This commit is contained in:
Oskari Lemmela
committed by
Daniel Golle
Daniel Golle
parent
7befce2bb1
commit
f0818706eb
@@ -5,586 +5,14 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
#include "mt7622.dtsi"
|
||||
#include "mt6380.dtsi"
|
||||
|
||||
#include "mt7622-bananapi-bpi-r64.dts"
|
||||
/ {
|
||||
model = "Bananapi BPI-R64";
|
||||
compatible = "bananapi,bpi-r64-rootdisk", "mediatek,mt7622";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512 root=/dev/mmcblk0p7 rootfstype=squashfs,f2fs";
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
proc-supply = <&mt6380_vcpu_reg>;
|
||||
sram-supply = <&mt6380_vm_reg>;
|
||||
};
|
||||
|
||||
cpu@1 {
|
||||
proc-supply = <&mt6380_vcpu_reg>;
|
||||
sram-supply = <&mt6380_vm_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
factory {
|
||||
label = "factory";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
green {
|
||||
label = "bpi-r64:pio:green";
|
||||
gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
red {
|
||||
label = "bpi-r64:pio:red";
|
||||
gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5v: regulator-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&bch {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&btif {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cir {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&irrx_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
switch@1f {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <0x1f>;
|
||||
reset-gpios = <&pio 54 0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
wan: port@0 {
|
||||
reg = <0>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan0";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&emmc_pins_default>;
|
||||
pinctrl-1 = <&emmc_pins_uhs>;
|
||||
status = "okay";
|
||||
bus-width = <8>;
|
||||
max-frequency = <50000000>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_1p8v>;
|
||||
assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
|
||||
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&sd0_pins_default>;
|
||||
pinctrl-1 = <&sd0_pins_uhs>;
|
||||
status = "okay";
|
||||
bus-width = <4>;
|
||||
max-frequency = <50000000>;
|
||||
cap-sd-highspeed;
|
||||
r_smpl = <1>;
|
||||
cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_3p3v>;
|
||||
assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
|
||||
assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
|
||||
};
|
||||
|
||||
&nandc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <¶llel_nand_pins>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&nor_flash {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi_nor_pins>;
|
||||
status = "disabled";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
|
||||
* SATA functions. i.e. output-high: PCIe, output-low: SATA
|
||||
*/
|
||||
asm_sel {
|
||||
gpio-hog;
|
||||
gpios = <90 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
};
|
||||
|
||||
/* eMMC is shared pin with parallel NAND */
|
||||
emmc_pins_default: emmc-pins-default {
|
||||
mux {
|
||||
function = "emmc", "emmc_rst";
|
||||
groups = "emmc";
|
||||
};
|
||||
|
||||
/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
|
||||
* "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
|
||||
* DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
|
||||
*/
|
||||
conf-cmd-dat {
|
||||
pins = "NDL0", "NDL1", "NDL2",
|
||||
"NDL3", "NDL4", "NDL5",
|
||||
"NDL6", "NDL7", "NRB";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
conf-clk {
|
||||
pins = "NCLE";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
emmc_pins_uhs: emmc-pins-uhs {
|
||||
mux {
|
||||
function = "emmc";
|
||||
groups = "emmc";
|
||||
};
|
||||
|
||||
conf-cmd-dat {
|
||||
pins = "NDL0", "NDL1", "NDL2",
|
||||
"NDL3", "NDL4", "NDL5",
|
||||
"NDL6", "NDL7", "NRB";
|
||||
input-enable;
|
||||
drive-strength = <4>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
conf-clk {
|
||||
pins = "NCLE";
|
||||
drive-strength = <4>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
eth_pins: eth-pins {
|
||||
mux {
|
||||
function = "eth";
|
||||
groups = "mdc_mdio", "rgmii_via_gmac2";
|
||||
};
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1-pins {
|
||||
mux {
|
||||
function = "i2c";
|
||||
groups = "i2c1_0";
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2-pins {
|
||||
mux {
|
||||
function = "i2c";
|
||||
groups = "i2c2_0";
|
||||
};
|
||||
};
|
||||
|
||||
i2s1_pins: i2s1-pins {
|
||||
mux {
|
||||
function = "i2s";
|
||||
groups = "i2s_out_mclk_bclk_ws",
|
||||
"i2s1_in_data",
|
||||
"i2s1_out_data";
|
||||
};
|
||||
|
||||
conf {
|
||||
pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
|
||||
"I2S_WS", "I2S_MCLK";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
irrx_pins: irrx-pins {
|
||||
mux {
|
||||
function = "ir";
|
||||
groups = "ir_1_rx";
|
||||
};
|
||||
};
|
||||
|
||||
irtx_pins: irtx-pins {
|
||||
mux {
|
||||
function = "ir";
|
||||
groups = "ir_1_tx";
|
||||
};
|
||||
};
|
||||
|
||||
/* Parallel nand is shared pin with eMMC */
|
||||
parallel_nand_pins: parallel-nand-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "par_nand";
|
||||
};
|
||||
};
|
||||
|
||||
pcie0_pins: pcie0-pins {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie0_pad_perst",
|
||||
"pcie0_1_waken",
|
||||
"pcie0_1_clkreq";
|
||||
};
|
||||
};
|
||||
|
||||
pcie1_pins: pcie1-pins {
|
||||
mux {
|
||||
function = "pcie";
|
||||
groups = "pcie1_pad_perst",
|
||||
"pcie1_0_waken",
|
||||
"pcie1_0_clkreq";
|
||||
};
|
||||
};
|
||||
|
||||
pmic_bus_pins: pmic-bus-pins {
|
||||
mux {
|
||||
function = "pmic";
|
||||
groups = "pmic_bus";
|
||||
};
|
||||
};
|
||||
|
||||
pwm7_pins: pwm1-2-pins {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm_ch7_2";
|
||||
};
|
||||
};
|
||||
|
||||
wled_pins: wled-pins {
|
||||
mux {
|
||||
function = "led";
|
||||
groups = "wled";
|
||||
};
|
||||
};
|
||||
|
||||
sd0_pins_default: sd0-pins-default {
|
||||
mux {
|
||||
function = "sd";
|
||||
groups = "sd_0";
|
||||
};
|
||||
|
||||
/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
|
||||
* "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
|
||||
* DAT2, DAT3, CMD, CLK for SD respectively.
|
||||
*/
|
||||
conf-cmd-data {
|
||||
pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
|
||||
"I2S2_IN","I2S4_OUT";
|
||||
input-enable;
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
conf-clk {
|
||||
pins = "I2S3_OUT";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
};
|
||||
conf-cd {
|
||||
pins = "TXD3";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
sd0_pins_uhs: sd0-pins-uhs {
|
||||
mux {
|
||||
function = "sd";
|
||||
groups = "sd_0";
|
||||
};
|
||||
|
||||
conf-cmd-data {
|
||||
pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
|
||||
"I2S2_IN","I2S4_OUT";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
conf-clk {
|
||||
pins = "I2S3_OUT";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
/* Serial NAND is shared pin with SPI-NOR */
|
||||
serial_nand_pins: serial-nand-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "snfi";
|
||||
};
|
||||
};
|
||||
|
||||
spic0_pins: spic0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spic0_0";
|
||||
};
|
||||
};
|
||||
|
||||
spic1_pins: spic1-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spic1_0";
|
||||
};
|
||||
};
|
||||
|
||||
/* SPI-NOR is shared pin with serial NAND */
|
||||
spi_nor_pins: spi-nor-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "spi_nor";
|
||||
};
|
||||
};
|
||||
|
||||
/* serial NAND is shared pin with SPI-NOR */
|
||||
serial_nand_pins: serial-nand-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "snfi";
|
||||
};
|
||||
};
|
||||
|
||||
uart0_pins: uart0-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart0_0_tx_rx" ;
|
||||
};
|
||||
};
|
||||
|
||||
uart2_pins: uart2-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart2_1_tx_rx" ;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog_pins: watchdog-pins {
|
||||
mux {
|
||||
function = "watchdog";
|
||||
groups = "watchdog";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm7_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwrap {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_bus_pins>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "disable";
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "disable";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spic0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spic1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssusb {
|
||||
vusb33-supply = <®_3p3v>;
|
||||
vbus-supply = <®_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u3phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&watchdog_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user