imx6: add support for gw54xx
The Gateworks GW54xx family of products is based on the Freescale
i.MX6Q SoC and offers a large variety of peripherals such as:
- i.MX6Q 1GB DDR3 (standard)
- 256MB NAND FLASH (standard)
- 6x PCIe (3x with USB)
- Optional expansion for additional USB/PCI based periperhals
- 1x USB EHCI
- 1x USB OTG
- HDMI Audio/Video in/out
- Analog Video in/out
- Analog Audio in/out
- Gateworks System Controller
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38188
This commit is contained in:
Luka Perkov
350
target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts
Normal file
350
target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts
Normal file
@@ -0,0 +1,350 @@
|
||||
/*
|
||||
* Copyright 2013 Gateworks Corporation
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx6q.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Gateworks Ventana GW54XX";
|
||||
compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
|
||||
|
||||
/* these are used by bootloader for disabling nodes */
|
||||
aliases {
|
||||
can0 = &can1;
|
||||
ethernet0 = &fec;
|
||||
ethernet1 = ð1;
|
||||
i2c0 = &i2c1;
|
||||
i2c1 = &i2c2;
|
||||
i2c2 = &i2c3;
|
||||
ipu0 = &ipu1;
|
||||
ipu1 = &ipu2;
|
||||
led0 = &led0;
|
||||
led1 = &led1;
|
||||
led2 = &led2;
|
||||
nand = &gpmi;
|
||||
pwm0 = &pwm1;
|
||||
pwm1 = &pwm2;
|
||||
pwm2 = &pwm3;
|
||||
pwm3 = &pwm4;
|
||||
sky2 = ð1;
|
||||
spi0 = &ecspi1;
|
||||
spi1 = &ecspi2;
|
||||
spi2 = &ecspi3;
|
||||
spi3 = &ecspi4;
|
||||
spi4 = &ecspi5;
|
||||
ssi0 = &ssi1;
|
||||
ssi1 = &ssi2;
|
||||
usb0 = &usbh3;
|
||||
usb1 = &usbotg;
|
||||
usdhc0 = &usdhc1;
|
||||
usdhc1 = &usdhc2;
|
||||
usdhc2 = &usdhc3;
|
||||
usdhc3 = &usdhc4;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led0: user1 {
|
||||
label = "user1";
|
||||
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
|
||||
default-state = "on";
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led1: user2 {
|
||||
label = "user2";
|
||||
gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2: user3 {
|
||||
label = "user3";
|
||||
gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
reg_2p5v: 2p5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "2P5V";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: 3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: usb_otg_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "fsl,imx6q-sabrelite-sgtl5000",
|
||||
"fsl,imx-audio-sgtl5000";
|
||||
model = "imx6q-sabrelite-sgtl5000";
|
||||
ssi-controller = <&ssi1>;
|
||||
audio-codec = <&codec>;
|
||||
audio-routing =
|
||||
"MIC_IN", "Mic Jack",
|
||||
"Mic Jack", "Mic Bias",
|
||||
"Headphone Jack", "HP_OUT";
|
||||
mux-int-port = <1>;
|
||||
mux-ext-port = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&audmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_audmux_3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet_1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-reset-gpios = <&gpio1 30 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpmi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpmi_nand_2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1_1>;
|
||||
|
||||
eeprom: eeprom@50 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
eeprom1: eeprom@50 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
eeprom2: eeprom@51 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x51>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
eeprom3: eeprom@52 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x52>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
eeprom4: eeprom@53 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x53>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
rtc: ds1672@68 {
|
||||
compatible = "dallas,ds1672";
|
||||
reg = <0x68>;
|
||||
};
|
||||
|
||||
gpio: pca9555@23 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x23>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
hwmon: gsc@29 {
|
||||
compatible = "gw,gsp";
|
||||
reg = <0x29>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2_2>;
|
||||
|
||||
pmic: pfuze@08 {
|
||||
compatible = "fsl,pfuze100";
|
||||
reg = <0x08>;
|
||||
};
|
||||
|
||||
pciswitch: pex8609@3f {
|
||||
compatible = "plx,pex8609";
|
||||
reg = <0x3f>;
|
||||
};
|
||||
|
||||
pciclkgen: si52147@6b {
|
||||
compatible = "sil,si52147";
|
||||
reg = <0x6b>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3_2>;
|
||||
|
||||
codec: sgtl5000@0a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
clocks = <&clks 169>;
|
||||
VDDA-supply = <®_2p5v>;
|
||||
VDDIO-supply = <®_3p3v>;
|
||||
};
|
||||
|
||||
accelerometer: mma8450@1c {
|
||||
compatible = "fsl,mma8450";
|
||||
reg = <0x1c>;
|
||||
};
|
||||
|
||||
videoout: adv7393@2a {
|
||||
compatible = "adi,adv7393";
|
||||
reg = <0x2a>;
|
||||
};
|
||||
|
||||
videoin: adv7180@20 {
|
||||
compatible = "adi,adv7180";
|
||||
reg = <0x20>;
|
||||
};
|
||||
|
||||
hdmiin: adv7611@4c {
|
||||
compatible = "adi,adv7611";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
|
||||
touchscreen: egalax_ts@04 {
|
||||
compatible = "eeti,egalax_ts";
|
||||
reg = <0x04>;
|
||||
wakeup-gpios = <&gpio1 12 0>;
|
||||
};
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
hog {
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
|
||||
MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
|
||||
MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
|
||||
MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
|
||||
MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
|
||||
MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
|
||||
MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
|
||||
MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
|
||||
MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
|
||||
MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
|
||||
MX6Q_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
reset-gpio = <&gpio1 29 0>;
|
||||
status = "okay";
|
||||
|
||||
eth1: sky2@8 { /* MAC/PHY on bus 8 */
|
||||
compatible = "marvell,sky2";
|
||||
/* Filled in by U-Boot */
|
||||
mac-address = [ 00 00 00 00 00 00 ];
|
||||
};
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
fsl,mode = "i2s-slave";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1_2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2_2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart3_1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart5_1>;
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
vbus-supply = <®_usb_otg_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg_1>;
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3_2>;
|
||||
cd-gpios = <&gpio7 0 0>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
10
target/linux/imx6/patches-3.10/111-gw54xx.patch
Normal file
10
target/linux/imx6/patches-3.10/111-gw54xx.patch
Normal file
@@ -0,0 +1,10 @@
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
|
||||
imx6dl-wandboard.dtb \
|
||||
imx6q-arm2.dtb \
|
||||
imx6q-gw5400-a.dtb \
|
||||
+ imx6q-gw54xx.dtb \
|
||||
imx6q-sabreauto.dtb \
|
||||
imx6q-sabrelite.dtb \
|
||||
imx6q-sabresd.dtb \
|
||||
Reference in New Issue
Block a user