domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ath79: add support for Netgear EX6400 and EX7300

Browse Source 
This is sold as a dual-band 802.11ac range extender. It has a sliding
switch for Extender mode or Access Point mode, a WPS button, a recessed
Reset button, a hard-power button, and a multitude of LED's, some
multiplexed via an NXP 74AHC164D chip. The internal serial header pinout is
Vcc, Tx, Rx, GND, with GND closest to the corner of the board. You may
connect at 115200 bps, 8 data bits, no parity, 1 stop bit.

Specification:
- System-On-Chip: QCA9558
- CPU/Speed: 720 MHz
- Flash-Chip: Winbond 25Q128FVSG
- Flash size: 16 MiB
- RAM: 128 MiB
- Wireless No1: QCA9558 on-chip 2.4GHz 802.11bgn, 3x3
- Wireless No2: QCA99x0 chip 5GHz 802.11an+ac, 4x4
- PHY: Atheros AR8035-A

Installation:
If you can get to the stock firmware's firmware upgrade option, just feed
it the factory.img and boot as usual. As an alternative, TFTP the
factory.img to the bootloader.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
[whitespace fix in DTS and reorder of make variables]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
This commit is contained in:
Daniel Gimpelevich
2018-09-13 21:08:51 -07:00
committed by Petr Štetiar
parent d75d4837fc
commit f61e754522
8 changed files with 282 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
package/boot/uboot-envtools/files/ath79
View File

@@ -20,6 +20,8 @@ buffalo,bhr-4grv2|\
glinet,gl-ar300m-nand|\
glinet,gl-ar300m-nor|\
librerouter,librerouter-v1|\
netgear,ex6400|\
netgear,ex7300|\
ocedo,koala|\
ocedo,raccoon|\
openmesh,om5p-ac-v2|\