brcm63xx: add support for the Actiontec R1000H gateway
SOC: Broadcom BCM6368 (2 * Broadcom BMIPS4350 V3.1 / 400 MHz) Flash size: 32MB (split 16/16 dual boot) RAM size: 64MB Wireless: BCM432x 802.11a/b/g/n(pci) Ethernet: Broadcom BCM53115 USB: 1 x USB 2.0 Known issues: - Unable to detect 53115 switch attached to MDIO. Not supported - No support for the cable port More info on the device and the research can be found at: http://www.actiontec.com/212.html Same FCC ID as: https://wikidevi.com/wiki/Actiontec_V1000H_(Telus) Signed-off-by: Anthony Sepa <anthonysepa@yahoo.ca> [jonas.gorski: fix commit subject/message] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
This commit is contained in:
		
				
					committed by
					
						
						Jonas Gorski
					
				
			
			
				
	
			
			
			
						parent
						
							1dc7a0cfd5
						
					
				
				
					commit
					f9b67b89d3
				
			@@ -69,6 +69,9 @@ livebox1)
 | 
			
		||||
	ucidef_set_led_netdev "wan" "WAN" "Livebox1:red:adsl" "eth1"
 | 
			
		||||
	ucidef_set_led_netdev "wlan0" "WIFI" "Livebox1:red:wifi" "wlan0"
 | 
			
		||||
	;;
 | 
			
		||||
r1000h)
 | 
			
		||||
	ucidef_set_led_usbport "usb" "USB" "R1000H:green:usb" "usb1-port1" "usb2-port1"
 | 
			
		||||
	;;
 | 
			
		||||
r5010un_v2)
 | 
			
		||||
	ucidef_set_led_usbdev "usb" "USB" "R5010UNv2:green:usb" "1-1"
 | 
			
		||||
	;;
 | 
			
		||||
 
 | 
			
		||||
@@ -12,6 +12,7 @@ case "$(brcm63xx_board_name)" in
 | 
			
		||||
 | 
			
		||||
cvg834g |\
 | 
			
		||||
evg2000 |\
 | 
			
		||||
r1000h |\
 | 
			
		||||
rta770bw |\
 | 
			
		||||
rta770w |\
 | 
			
		||||
spw303v |\
 | 
			
		||||
 
 | 
			
		||||
@@ -114,6 +114,9 @@ set_state() {
 | 
			
		||||
	p870hw-51a_v2)
 | 
			
		||||
		status_led="P870HW-51a:green:power"
 | 
			
		||||
		;;
 | 
			
		||||
	r1000h)
 | 
			
		||||
		status_led="R1000H:green:power"
 | 
			
		||||
		;;
 | 
			
		||||
	r5010un_v2)
 | 
			
		||||
		status_led="R5010UNv2:green:power"
 | 
			
		||||
		;;
 | 
			
		||||
 
 | 
			
		||||
@@ -25,6 +25,7 @@ case "$(brcm63xx_board_name)" in
 | 
			
		||||
	hg622 |\
 | 
			
		||||
	magic |\
 | 
			
		||||
	p870hw-51a_v2 |\
 | 
			
		||||
	r1000h |\
 | 
			
		||||
	r5010un_v2 |\
 | 
			
		||||
	rta770bw |\
 | 
			
		||||
	rta770w |\
 | 
			
		||||
 
 | 
			
		||||
@@ -21,6 +21,9 @@ brcm63xx_dt_detect() {
 | 
			
		||||
	"ADB P.DG AV4202N")
 | 
			
		||||
		board_name="av4202n"
 | 
			
		||||
		;;
 | 
			
		||||
	"Actiontec R1000H")
 | 
			
		||||
		board_name="r1000h"
 | 
			
		||||
		;;
 | 
			
		||||
	"Alcatel RG100A")
 | 
			
		||||
		board_name="rg100a"
 | 
			
		||||
		;;
 | 
			
		||||
 
 | 
			
		||||
							
								
								
									
										93
									
								
								target/linux/brcm63xx/dts/r1000h.dts
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										93
									
								
								target/linux/brcm63xx/dts/r1000h.dts
									
									
									
									
									
										Normal file
									
								
							@@ -0,0 +1,93 @@
 | 
			
		||||
/dts-v1/;
 | 
			
		||||
 | 
			
		||||
#include "bcm6368.dtsi"
 | 
			
		||||
 | 
			
		||||
#include <dt-bindings/input/input.h>
 | 
			
		||||
 | 
			
		||||
/ {
 | 
			
		||||
	model = "Actiontec R1000H";
 | 
			
		||||
	compatible = "actiontec,r1000h", "brcm,bcm6368";
 | 
			
		||||
 | 
			
		||||
	chosen {
 | 
			
		||||
		bootargs = "root=/dev/mtdblock2 rootfstype=squashfs noinitrd console=ttyS0,115200";
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	gpio-keys-polled {
 | 
			
		||||
		compatible = "gpio-keys-polled";
 | 
			
		||||
		#address-cells = <1>;
 | 
			
		||||
		#size-cells = <0>;
 | 
			
		||||
		poll-interval = <20>;
 | 
			
		||||
		debounce-interval = <60>;
 | 
			
		||||
 | 
			
		||||
		reset {
 | 
			
		||||
			label = "reset";
 | 
			
		||||
			gpios = <&pinctrl 34 1>;
 | 
			
		||||
			linux,code = <KEY_RESTART>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		wps {
 | 
			
		||||
			label = "wps";
 | 
			
		||||
			gpios = <&pinctrl 35 1>;
 | 
			
		||||
			linux,code = <KEY_WPS_BUTTON>;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	gpio-leds {
 | 
			
		||||
		compatible = "gpio-leds";
 | 
			
		||||
 | 
			
		||||
		inet_green {
 | 
			
		||||
			label = "R1000H:green:inet";
 | 
			
		||||
			gpios = <&pinctrl 5 0>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		usb_green {
 | 
			
		||||
			label = "R1000H:green:usb";
 | 
			
		||||
			gpios = <&pinctrl 21 1>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		power_green {
 | 
			
		||||
			label = "R1000H:green:power";
 | 
			
		||||
			gpios = <&pinctrl 22 0>;
 | 
			
		||||
			default-state = "on";
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		wps_green {
 | 
			
		||||
			label = "R1000H:green:wps";
 | 
			
		||||
			gpios = <&pinctrl 23 1>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		power_red {
 | 
			
		||||
			label = "R1000H:red:power";
 | 
			
		||||
			gpios = <&pinctrl 24 0>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		wps_red {
 | 
			
		||||
			label = "R1000H:red:wps";
 | 
			
		||||
			gpios = <&pinctrl 30 1>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		inet_red {
 | 
			
		||||
			label = "R1000H:red:inet";
 | 
			
		||||
			gpios = <&pinctrl 31 0>;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pflash {
 | 
			
		||||
	status = "ok";
 | 
			
		||||
 | 
			
		||||
	linux,part-probe = "bcm63xxpart";
 | 
			
		||||
 | 
			
		||||
	CFE@0 {
 | 
			
		||||
		reg = <0x000000 0x020000>;
 | 
			
		||||
		read-only;
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	linux@20000 {
 | 
			
		||||
		reg = <0x020000 0x1fc0000>;
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	nvram@1fe0000 {
 | 
			
		||||
		reg = <0x1fe0000 0x20000>;
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
@@ -1,3 +1,4 @@
 | 
			
		||||
 | 
			
		||||
#
 | 
			
		||||
# BCM33XX/BCM63XX Profiles
 | 
			
		||||
#
 | 
			
		||||
@@ -174,6 +175,21 @@ define Device/96368MVWG-generic
 | 
			
		||||
endef
 | 
			
		||||
TARGET_DEVICES += 96368MVWG-generic
 | 
			
		||||
 | 
			
		||||
### Actiontec ###
 | 
			
		||||
define Device/R1000H
 | 
			
		||||
  $(Device/bcm63xx)
 | 
			
		||||
  FILESYSTEMS := squashfs
 | 
			
		||||
  DEVICE_TITLE := Actiontec R1000H
 | 
			
		||||
  DEVICE_DTS := r1000h
 | 
			
		||||
  CFE_BOARD_ID := 96368MVWG
 | 
			
		||||
  CFE_CHIP_ID := 6368
 | 
			
		||||
  FLASH_MB := 32
 | 
			
		||||
  IMAGE_OFFSET := 0x20000
 | 
			
		||||
  DEVICE_PACKAGES := \
 | 
			
		||||
    $(USB2_PACKAGES) $(BRCMWL_PACKAGES)
 | 
			
		||||
endef
 | 
			
		||||
TARGET_DEVICES += R1000H
 | 
			
		||||
 | 
			
		||||
### ADB ###
 | 
			
		||||
define Device/A4001N
 | 
			
		||||
  $(Device/bcm63xx)
 | 
			
		||||
 
 | 
			
		||||
							
								
								
									
										50
									
								
								target/linux/brcm63xx/patches-4.4/578-board_R1000H.patch
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										50
									
								
								target/linux/brcm63xx/patches-4.4/578-board_R1000H.patch
									
									
									
									
									
										Normal file
									
								
							@@ -0,0 +1,50 @@
 | 
			
		||||
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 | 
			
		||||
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
 | 
			
		||||
@@ -2193,6 +2193,31 @@ static struct board_info __initdata boar
 | 
			
		||||
 	},
 | 
			
		||||
 };
 | 
			
		||||
 
 | 
			
		||||
+static struct board_info __initdata board_R1000H = {
 | 
			
		||||
+	.name				= "R1000H",
 | 
			
		||||
+	.expected_cpu_id		= 0x6368,
 | 
			
		||||
+
 | 
			
		||||
+	.has_uart0			= 1,
 | 
			
		||||
+	.has_uart1			= 1,
 | 
			
		||||
+	.has_pci			= 1,
 | 
			
		||||
+	.has_ohci0			= 1,
 | 
			
		||||
+	.has_ehci0			= 1,
 | 
			
		||||
+
 | 
			
		||||
+	.has_enetsw			= 1,
 | 
			
		||||
+	.enetsw = {
 | 
			
		||||
+		.used_ports = {
 | 
			
		||||
+			[5] = {
 | 
			
		||||
+				.used  = 1,
 | 
			
		||||
+				.phy_id  = 0xff,
 | 
			
		||||
+				.bypass_link = 1,
 | 
			
		||||
+				.force_speed = 1000,
 | 
			
		||||
+				.force_duplex_full = 1,
 | 
			
		||||
+				.name  = "RGMII",
 | 
			
		||||
+			},
 | 
			
		||||
+		},
 | 
			
		||||
+	},
 | 
			
		||||
+};
 | 
			
		||||
+
 | 
			
		||||
 static struct board_info __initdata board_VR3025u = {
 | 
			
		||||
 	.name					= "96368M-1541N",
 | 
			
		||||
 	.expected_cpu_id		= 0x6368,
 | 
			
		||||
@@ -2674,6 +2699,7 @@ static const struct board_info __initcon
 | 
			
		||||
 	&board_HG622,
 | 
			
		||||
 	&board_HG655b,
 | 
			
		||||
 	&board_P870HW51A_V2,
 | 
			
		||||
+	&board_R1000H,
 | 
			
		||||
 	&board_VH4032N,
 | 
			
		||||
 	&board_VR3025u,
 | 
			
		||||
 	&board_VR3025un,
 | 
			
		||||
@@ -2775,6 +2801,7 @@ static struct of_device_id const bcm963x
 | 
			
		||||
 	{ .compatible = "sfr,nb6-ser-r0", .data = &board_nb6, },
 | 
			
		||||
 #endif
 | 
			
		||||
 #ifdef CONFIG_BCM63XX_CPU_6368
 | 
			
		||||
+	{ .compatible = "actiontec,r1000h", .data = &board_R1000H, },
 | 
			
		||||
 	{ .compatible = "adb,av4202n", .data = &board_AV4202N, },
 | 
			
		||||
 	{ .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
 | 
			
		||||
 	{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
 | 
			
		||||
		Reference in New Issue
	
	Block a user