domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

sunxi: add support for FriendlyARM NanoPi R1S H5

Browse Source 
Specification:
  CPU: Allwinner H5, Quad-core Cortex-A53
  DDR3 RAM: 512MB
  Network: 10/100/1000M Ethernet x 2
  USB Host: Type-A x 1
  MicroSD Slot x 1
  MicroUSB: for power input
  Debug Serial Port: 3Pin pin-header
  LED: WAN, LAN, SYS
  KEY: Reset
  Power Supply: DC 5V/2A

Installation:
  Write the image to SD Card with dd.

Note:
  1. OpenWrt currently does not support LED_FUNCTION, change back to the
     previous practice (Consistent with NanoPi R1).
  2. Since the upstream commit https://github.com/torvalds/linux/bbc4d71
     ("net: phy: realtek: fix rtl8211e rx/tx delay config"), we need to
     change the phy-mode from rgmii to rgmii-id.
     So set phy-mode for 5.4 and 5.10 respectively.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
This commit is contained in:
Chukun Pan
2021-10-18 12:20:03 +08:00
committed by Hauke Mehrtens
parent e43eb16efe
commit fde68cb809
9 changed files with 588 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/sunxi/base-files/etc/board.d/01_leds
View File

@@ -7,7 +7,8 @@ boardname="${board##*,}"
board_config_update
case $board in
friendlyarm,nanopi-r1)
friendlyarm,nanopi-r1|\
friendlyarm,nanopi-r1s-h5)
ucidef_set_led_netdev "wan" "WAN" "nanopi:green:wan" "eth0"
ucidef_set_led_netdev "lan" "LAN" "nanopi:green:lan" "eth1"
;;

65
target/linux/sunxi/base-files/etc/board.d/02_network
View File

@@ -3,27 +3,54 @@
#
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh
sunxi_setup_interfaces()
{
local board="$1"
case "$board" in
friendlyarm,nanopi-r1|\
friendlyarm,nanopi-r1s-h5)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
lamobo,lamobo-r1)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
;;
olimex,a20-olinuxino-micro)
ucidef_set_interface_lan "wlan0"
;;
xunlong,orangepi-r1)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
*)
ucidef_set_interface_lan "eth0"
;;
esac
}
sunxi_setup_macs()
{
local board="$1"
local lan_mac=""
local wan_mac=""
local label_mac=""
case "$board" in
friendlyarm,nanopi-r1s-h5)
lan_mac=$(get_mac_binary "/sys/bus/i2c/devices/0-0051/eeprom" 0xfa)
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
}
board_config_update
case $(board_name) in
friendlyarm,nanopi-r1)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
lamobo,lamobo-r1)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
;;
olimex,a20-olinuxino-micro)
ucidef_set_interface_lan "wlan0"
;;
xunlong,orangepi-r1)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
*)
ucidef_set_interface_lan "eth0"
;;
esac
board=$(board_name)
sunxi_setup_interfaces $board
sunxi_setup_macs $board
board_config_flush
exit 0