ramips: add support for Mikrotik LtAP-2HnD
Mikrotik LtAP-2HnD is a outdoor/automotive WLAN 4 router with integrated GPS
receiver and two mPCIe slots.
Specifications:
* SoC: MT7621A
* RAM: 128 MiB Nanya NT5CC64M16GP-DI
* Flash: 16 MiB winbond W25Q128JV
* WLAN:
* Atheros AR9382 with power amplifier SKY 85330 (2x2 internal antennas,
with RF switches for external connectors)
* Ethernet: 1 Gbps, single port
* USB Host: USB 2.0 Speeds
* Serial: 115200 baud
* LEDs: Power, System, GPS, 5* RSSI
* mPCIe:
* miniPCIe slot 1: PCIe and USB 2.0 Host (via switch shared with USB Host)
* miniPCIe slot 2: USB 2.0 and 3.0
* SIM Cards:
* Slot 1 Connected to mPCIe slot 1
* Slot 2 and 3 connected to mPCIe slot 2 via switch
* GPS: MTK 3333 on serial port 2 (/dev/ttyS1), 115200 baud and PPS on gpio 14
gpios are exposed to /sys/class/gpio:
* usb-select: swithes USB 2.0 interface between external port and internal
mPCIe slot 1 default is the external USB interface
* gps-reset: resets the GPS interface chip
* sim-select: switches between sim slot 2 and 3 connected to mPCIe slot 2
* gps-ant-select: switches GPS antenna between internal antenna and SMA
connected antenna
* lte-reset: resets mPCIe slot 2
Flashing:
TFTP boot initramfs image and then perform sysupgrade. Follow common
MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
This commit is contained in:
committed by
Hauke Mehrtens
parent
5a1af6ed62
commit
ffa4b5283b
@@ -1350,6 +1350,13 @@ define Device/MikroTik
|
||||
append-metadata
|
||||
endef
|
||||
|
||||
define Device/mikrotik_ltap-2hnd
|
||||
$(Device/MikroTik)
|
||||
DEVICE_MODEL := LtAP-2HnD
|
||||
DEVICE_PACKAGES += kmod-ath9k kmod-pps-gpio rssileds
|
||||
endef
|
||||
TARGET_DEVICES += mikrotik_ltap-2hnd
|
||||
|
||||
define Device/mikrotik_routerboard-750gr3
|
||||
$(Device/MikroTik)
|
||||
DEVICE_MODEL := RouterBOARD 750Gr3
|
||||
|
||||
Reference in New Issue
Block a user