domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
57,343 Commits 6 Branches 28 Tags
7ad1fa12efd99dd2a4e4ffa01365280f63e99e55
Commit Graph

257 Commits

Author SHA1 Message Date
John Audia
edeae512c0 kernel: bump 5.15 to 5.15.63 
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <therealgraysky@proton.me>
 2022-08-25 22:07:43 +02:00
Petr Štetiar
ca5c695a45 kernel: bump 5.15 to 5.15.62 
Deleted following upstreamed patches:

 bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch
 bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
 bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
 bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
 bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
 bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch
 bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
 bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch
 bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
 bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch
 bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch
 bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch
 bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch
 bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch
 bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch

 bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch

 mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch

Manually rebased following patches:

 bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch
 bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch
 bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
 bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch
 bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch
 bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
 bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch

Runtime tested on turris-omnia and glinet-b1300.

Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
 2022-08-23 10:37:04 +02:00
Hauke Mehrtens
ff06edd1f0 kernel: Activate CONFIG_GPIOLIB in generic configuration 
All targets expect the malta target already activate the CONFIG_GPIOLIB
option. Move it to generic kernel configuration and also activate it for
malta.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2022-08-10 21:36:17 +02:00
John Audia
364575e3a3 kernel: bump 5.15 to 5.15.58 
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <therealgraysky@proton.me>
 2022-07-31 18:55:22 +02:00
John Audia
4921ab0be4 kernel: bump 5.15 to 5.15.56 
Manually rebased:
  bcm27xx/patches-5.15/950-0470-sound-usb-add-device-quirks-for-A4Tech-FHD-1080p-web.patch

Remove upstreamed:
  bcm27xx/patches-5.15/950-0060-tty-amba-pl011-Add-un-throttle-support.patch[1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.56&id=2db3b95166f72e6481a79b82b1d6f94f4b18fcc1

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <therealgraysky@proton.me>
 2022-07-31 18:55:22 +02:00
John Audia
e4af991220 kernel: bump 5.15 to 5.15.54 
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <therealgraysky@proton.me>
 2022-07-31 18:55:22 +02:00
Daniel Golle
7c02a4a00b bcm27xx: update patch to fix build 
Linux stable v5.15.51 brought commit 7a3a4683562e
("ARM: dts: bcm2711-rpi-400: Fix GPIO line names") which was already
part of a local patch which then failed to apply. Remove the already
applied and now failing hunk from the patch to fix the build.

Fixes: 552d76f2be ("kernel: bump 5.15 to 5.15.51")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2022-07-11 23:39:13 +01:00
John Audia
552d76f2be kernel: bump 5.15 to 5.15.51 
Manual rebase by Marty Jones:
  bcm27xx/patches-5.15/950-0078-BCM2708-Add-core-Device-Tree-support.patch

All other patches automatically rebased.

Signed-off-by: John Audia <therealgraysky@proton.me>
Signed-off-by: Marty Jones <mj8263788@gmail.com>
[Apply same changes to new dts entry in modified file]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2022-07-11 00:49:25 +02:00
Rui Salvaterra
90a6350423 kernel: bump 5.15 to 5.15.50 
Patches automatically rebased.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 2022-07-03 20:25:38 +02:00
Stijn Tintel
e9f9cd14cc bcm27xx: add support for Raspberry Pi Zero 2 
Due to licensing uncertainty, we do not include the firmwares for the
wireless chips used in the Raspberry Pi Zero 2 W. To have working
wireless, follow the instructions below.

For people building their own images:

  mkdir -p files/lib/firmware/brcm
  wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.bin
  wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.txt
  wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.bin
  wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.txt

Now build the OpenWrt image as usual, and it will include the firmware
files in the correct location.

For people using ext4 images:

Write the ext4 image to the sdcard, then mount the 2nd partition and put
the firmware files from the links above in /lib/firmware/brcm relative
from the mount point where the partition is mounted.

For people using squashfs images:

Write the squashfs image to the sdcard, place it in the Raspberry Pi
Zero 2 W, boot it and wait for the overlay filesystem to be created.
Find the offset of the overlay filesystem in sysfs:

  # cat /sys/devices/virtual/block/loop0/loop/offset
  25755648

Shut down the device, unplug the power and move the SD card to a Linux
computer. Mount the 2nd partition of the sdcard as a loop device with
the offset found earlier.

  sudo mount /dev/sdh2 -o loop,offset=25755648 /mnt/temp

Put the firmware files from the links above in /upper/lib/firmware/brcm
relative to the mount point where the loop device is mounted.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Peter van Dijk <peter@7bits.nl>
 2022-07-01 12:56:56 +03:00
Rui Salvaterra
b55efebb1f kernel: bump 5.15 to 5.15.47 
Deleted (upstreamed):
generic/backport-5.15/702-v5.19-32-net-ethernet-mtk_eth_soc-out-of-bounds-read-in-mtk_h.patch [01]

[01] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.47&id=b24ca1cf846273361d5bd73a35de95a486a54b6d

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[Removed 702-v5.19-32-net-ethernet-mtk_eth_soc-out-of-bounds-read-in-mtk_h.patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2022-06-27 00:57:16 +02:00
Rui Salvaterra
251a382c28 kernel: bump 5.15 to 5.15.46 
Deleted (upstreamed):
generic/backport-5.15/400-mtdblock-warn-if-opened-on-NAND.patch [01]
generic/backport-5.15/420-v5.19-01-mtd-spinand-gigadevice-fix-Quad-IO-for-GD5F1GQ5UExxG.patch [02]
bcm27xx/patches-5.15/950-0029-Revert-mailbox-avoid-timer-start-from-callback.patch [03]
bcm27xx/patches-5.15/950-0417-bcm2711_thermal-Don-t-clamp-temperature-at-zero.patch [04]
bcm27xx/patches-5.15/950-0740-drm-vc4-hvs-Fix-frame-count-register-readout.patch [05]
bcm27xx/patches-5.15/950-0755-drm-vc4-hvs-Reset-muxes-at-probe-time.patch [06]
bcm27xx/patches-5.15/950-0759-drm-vc4-txp-Don-t-set-TXP_VSTART_AT_EOF.patch [07]
bcm27xx/patches-5.15/950-0760-drm-vc4-txp-Force-alpha-to-be-0xff-if-it-s-disabled.patch [08]
bcm53xx/patches-5.15/031-v5.17-0005-ARM-dts-BCM5301X-update-CRU-block-description.patch [09]
mediatek/patches-5.15/102-mt7629-enable-arch-timer.patch [10]

Manually rebased:
bcm27xx/patches-5.15/950-0741-drm-vc4-hvs-Use-pointer-to-HVS-in-HVS_READ-and-HVS_W.patch

[01] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=f41c9418c5898c01634675150696da290fb86796
[02] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=d5b66645305c6f3a1b2cf75cee4157b07f293309
[03] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=119f99209d8531359bcb935f252ec435f9d21b13
[04] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=c4e1280abead1552e1764684079a43e222ccd163
[05] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=08465a1889cb48ec64431e9db745b5be15399251
[06] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=0e26a6da02e63b75b629573d13966c36aa6264f0
[07] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=01c9020b2e7c85e394879f34851805179ac3d1d8
[08] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=d47f85cc0171a5d3c5bd8cbb8a98983ca3357cbd
[09] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=5151f24ac937ff7eb1f078257c66e3c0f0296010
[10] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.46&id=ffea838686b82fbb2801cdfad6ba5309d15c032d

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 2022-06-27 00:57:16 +02:00
Tomasz Maciej Nowak
539e60539a generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM] 
This is now built-in, enable so it won't propagate on target configs.

Link: https://lkml.org/lkml/2022/1/3/168
Fixes: 79e7a2552e ("kernel: bump 5.15 to 5.15.44")
Fixes: 0ca9367069 ("kernel: bump 5.10 to 5.10.119")
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
(Link to Kernel's commit taht made it built-in,
CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2022-06-24 17:10:24 +02:00
Rui Salvaterra
fbf6992f2b kernel: bump 5.15 to 5.15.45 
Patches automatically rebased.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 2022-06-06 19:20:28 +02:00
Rui Salvaterra
79e7a2552e kernel: bump 5.15 to 5.15.44 
Delete the crypto-lib-blake2s kmod package, as BLAKE2s is now built-in.

Patches automatically rebased.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 2022-06-06 19:20:28 +02:00
Rui Salvaterra
2454342e06 kernel: bump 5.15 to 5.15.42 
Deleted (upstreamed):
generic/backport-5.15/610-v5.18-netfilter-flowtable-move-dst_check-to-packet-path.patch [1]
generic/pending-5.15/704-00-netfilter-flowtable-fix-excessive-hw-offload-attempt.patch [2]
generic/pending-5.15/704-01-netfilter-nft_flow_offload-skip-dst-neigh-lookup-for.patch [3]
generic/pending-5.15/704-02-net-fix-dev_fill_forward_path-with-pppoe-bridge.patch [4]
generic/pending-5.15/704-03-netfilter-nft_flow_offload-fix-offload-with-pppoe-vl.patch [5]

Manually rebased:
generic/hack-5.15/650-netfilter-add-xt_FLOWOFFLOAD-target.patch

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=88b937673b3552d54da20f648e61a123f4c1fa67
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=5f4197a020c049a59ea7907c31f9ab037dcefefe
[3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=7613dcaceee281973145588f4244f2f78ef85b7f
[4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=f96b2e06721249ebf8da3254cfef29dcb6583948
[5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.42&id=b329889974aed47e1167c85653c07097013e01a7

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 2022-06-06 19:20:28 +02:00
Rui Salvaterra
ed1536e0b6 kernel: bump 5.15 to 5.15.41 
Deleted (upstreamed):
generic/backport-5.15/890-v5.19-net-sfp-Add-tx-fault-workaround-for-Huawei-MA5671A-SFP-ON.patch [1]

Other patches automatically rebased.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.41&id=99858114a3b2c8f5f8707d9bbd46c50f547c87c0

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 2022-06-06 19:20:28 +02:00
Eneas U de Queiroz
7b6beb7489 bcm27xx/bcm2711: enable asm crypto algorithms 
This enables arm64/neon version of AES, SHA256 and SHA512 algorithms in
the kernel.  bcm2711 does not support armv8 crypto extensions, so they
are not included.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
 2022-06-04 12:39:01 +02:00
Eneas U de Queiroz
38ebb210a9 bcm27xx/bcm2710: enable asm crypto algorithms 
This enables arm64/neon version of AES, SHA256 and SHA512 algorithms in
the kernel.  bcm2710 does not support armv8 crypto extensions, so they
are not included.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
 2022-06-04 12:39:01 +02:00
Álvaro Fernández Rojas
cecb0ccfbf bcm27xx: add pwm-fan dependency to RPi PoE 
This is needed for the fan in the PoE hat to work.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2022-05-22 22:06:13 +02:00
Álvaro Fernández Rojas
19ef3b54f4 bcm27xx: sound-soc-rpi-cirrus: fix package 
Fix kmod-sound-soc-rpi-cirrus package dependencies.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2022-05-20 21:00:24 +02:00
Álvaro Fernández Rojas
0f14619e30 bcm27xx: modules: video: fix whitespace 
No idea how this ended up here v2...

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2022-05-20 15:44:47 +02:00
Álvaro Fernández Rojas
50d33825b6 bcm27xx: enable PWM drivers in config 
Removes PWM module package.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2022-05-20 15:44:47 +02:00
Álvaro Fernández Rojas
810eac8c7f bcm27xx: base-files: align network files 
- Use the same order for /etc/board.d/02_network and
/lib/preinit/05_set_preinit_iface_brcm2708.
- Add missing RPi 400 and CM4 to /lib/preinit/05_set_preinit_iface_brcm2708.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2022-05-19 19:33:00 +02:00
Álvaro Fernández Rojas
e508323b13 bcm27xx: diag.sh: fix whitespace 
No idea how this ended up here...

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2022-05-19 19:32:37 +02:00
Tony Ambardar
76fae1d169 config: limit CONFIG_DEBUG_INFO to top-level generic configs 
Remove redundant target-level entries, noting that these settings will be
configured from "Kernel build options" of Kconfig.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[remove from new configs introduced after patch submission]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
 2022-05-18 13:32:06 +03:00
John Audia
0ffb6deaaa bcm27xx: add CPU_FREQ_GOV_SCHEDUTIL 
This is enabled upstream for bcm2709, bcm2710 and bcm2711.
dff79e31c3/arch/arm/configs/bcm2709_defconfig (L51)
dff79e31c3/arch/arm/configs/bcm2711_defconfig (L51)

Signed-off-by: John Audia <graysky@archlinux.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2022-05-17 15:31:59 +02:00
Álvaro Fernández Rojas
575f2dcf7c bcm27xx: remove linux 5.10 configs 
Sorry, I missed these when removing linux v5.10 support...

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2022-05-17 15:22:13 +02:00
Álvaro Fernández Rojas
d5c4f24b2a bcm27xx: remove linux 5.10 compatibility 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2022-05-17 15:11:23 +02:00
Álvaro Fernández Rojas
99ad84b6d9 bcm27xx: switch to 5.15 
I tested it locally and I couldn't find any regressions, so let's give this a
wider test :).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2022-05-17 15:11:23 +02:00
Álvaro Fernández Rojas
20ea6adbf1 bcm27xx: add support for linux v5.15 
Build system: x86_64
Build-tested: bcm2708, bcm2709, bcm2710, bcm2711
Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B

Signed-off-by: Marty Jones <mj8263788@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2022-05-17 15:11:22 +02:00
John Audia
8592df67f4 kernel: bump 5.10 to 5.10.114 
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B
Run-tested: bcm2711/RPi4B

Signed-off-by: John Audia <therealgraysky@proton.me>
 2022-05-16 20:26:38 +02:00
John Audia
e08942e76a kernel: bump 5.10 to 5.10.113 
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-04-30 21:27:45 +02:00
John Audia
cab20be008 kernel: bump 5.10 to 5.10.112 
Manually rebased:
  ath79/patches-5.10/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-04-23 20:46:25 +02:00
John Audia
0085dd6cb5 kernel: bump 5.10 to 5.10.111 
Removed upstreamed:
  pending-5.10/850-0003-PCI-aardvark-Fix-support-for-MSI-interrupts.patch
  apm821xx/patches-5.10/150-ata-sata_dwc_460ex-Fix-crash-due-to-OOB-write.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-04-16 14:02:11 +02:00
John Audia
b92ec82235 kernel: bump 5.10 to 5.10.110 
Removed upstreamed:
  generic/backport-5.10/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch
  generic/pending-5.10/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch
  ipq40xx/patches-5.10/105-ipq40xx-fix-sleep-clock.patch

All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200
Compile-/run-tested: ath79/generic (Archer C7 v2).

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-04-09 19:31:46 +02:00
Piotr Dymacz
ff09905a46 bcm27xx: include 'rtc' in target's 'FEATURES' 
There are many ways to add external RTC to Raspberry Pi boards. Let's
include support for this for the whole target and while at it, sort
features alphabetically.

Fixes: #9594
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
 2022-04-07 10:03:23 +02:00
John Audia
c41da167d2 kernel: bump 5.10 to 5.10.109 
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-03-30 18:33:38 +02:00
Rui Salvaterra
2c26eb4e48 kernel: bump 5.10 to 5.10.108 
Patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200
Tested-by: John Audia <graysky@archlinux.us>

Build-tested: ath79/generic, ramips/mt76{20,21,x8}, ipq40xx, mvebu, realtek/rtl{838,930}x, x86/64
Run-tested: ramips/mt7621, mvebu
Tested-by: Stijn Segers <foss@volatilesystems.org>

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 2022-03-26 18:14:39 +00:00
Aleksander Jan Bajkowski
210c534ce2 kernel: move rtl8152 patches to generic 
This commit moves the patches for the r8152.c driver to the generic
directory. Previously they were only available on the bcm27xx target.
With these patches the Realtek RTL8153C, RTL8153D, RTL8156A and RTL8156B
chips are supported on all targets by the kmod-usb-net-rtl8152 module.
The RTL8156A and RTL8156B are the 2.5Gb/s Ethernet adapters.

The patches have been tested on TP-Link UE300 (RTL8153A) and UNITEK
1313B (RTL8156B).

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
 2022-03-25 18:14:13 +01:00
John Audia
b04d38a2ea kernel: bump 5.10 to 5.10.106 
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-03-19 16:13:58 +01:00
John Audia
048f0b1702 kernel: bump 5.10 to 5.10.105 
Updated default config with new sym (CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y).

Manually rebased:
    generic/hack-5.10/220-arm-gc_sections.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-03-19 16:13:58 +01:00
Josef Schlehofer
31ccc27f41 bcm27xx: bcm2711: add kmod-usb-net-lan78xx 
Some vendors like Seeedstudio in their product [1] with Raspberry Pi
Compute Module 4 uses Microchip LAN7800 (USB 3.0 to Gigabit
Ethernet Bridge) - USB 3.0 extended from PCIe of CM4.

lsusb output:
```
Bus 002 Device 002: ID 0424:7800 Microchip LAN7800
```

Raspberry Pi 4 and even Compute Module 4 has many resources available
and for just one kernel module it is not necessary to add additional specific CM4 profiles.
Let's include it by default, so the both Ethernet ports will be usable
to have better user-experience. Because previous generation of Raspberry
Pi included LAN7800 Gigabit Ethernet by default and it is enabled there
[2] in kernel without additional kernel module, which was added recently [3].

After this commit in dmesg can be found this:

```
root@OpenWrt:~# dmesg | grep lan
[    7.038889] lan78xx 2-3:1.0 (unnamed net_device) (uninitialized): int urb period 64
[    7.090484] usbcore: registered new interface driver lan78xx
```

Tested and works with sysupgrade image.

[1] https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html
[2] 32c74552b2/target/linux/bcm27xx/bcm2709/config-5.4 (L437)
[3] 31647d8be8

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
 2022-03-19 16:13:58 +01:00
John Audia
3f5b2d25ee kernel: bump 5.10 to 5.10.104 
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-03-13 19:24:13 +01:00
Rui Salvaterra
05ed7dc50d kernel: bump 5.10 to 5.10.103 
Patches automatically rebased.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 2022-03-05 21:05:45 +01:00
John Audia
0989b7ad3a kernel: bump 5.10 to 5.10.102 
Removed upstreamed:
	bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch[1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.102&id=f333c1916fd6b55900029bf8f918cc00009e2111

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-03-01 21:38:36 +01:00
John Audia
a2d4b5711a kernel: bump 5.10 to 5.10.101 
Removed upstreamed:
  pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1]
  bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-03-01 21:38:36 +01:00
John Audia
d4c20ff948 bcm27xx: bcm2710: update defconfig 
Ran `make kernel_menuconfig CONFIG_TARGET=bcm2710` having used the snapshot
config for bcm2710[1].  Manually added back two symbols that the make target
removed, namely:
* # CONFIG_SND_SOC_AD193X_I2C is not set
* # CONFIG_SND_SOC_AD193X_SPI is not set

1. https://downloads.openwrt.org/snapshots/targets/bcm27xx/bcm2710/config.buildinfo

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-02-28 21:52:01 +01:00
John Audia
a68dd8057c bcm27xx: bcm2711: update defconfig 
Ran `make kernel_menuconfig CONFIG_TARGET=bcm2711` having used the snapshot
config for bcm2711[1].  Manually added back two symbols that the make target
removed, namely:
* # CONFIG_SND_SOC_AD193X_I2C is not set
* # CONFIG_SND_SOC_AD193X_SPI is not set

Without adding these back, the build fails due to unsatisfied deps[2].

Build system: x86_64
Build-tested: bcm2711/multidevices

1. https://downloads.openwrt.org/snapshots/targets/bcm27xx/bcm2711/config.buildinfo
2. a478202d74 (commitcomment-67096592)

Signed-off-by: John Audia <graysky@archlinux.us>
 2022-02-28 21:52:01 +01:00
Christian Lamparter
83f2f1ad58 Revert "bcm27xx: bcm27xx: update defconfig" 
This reverts all four commits
dbb45421ba "bcm27xx: bcm2708: update defconfig"
332f69583a "bcm27xx: bcm2709: update defconfig"
a478202d74 "bcm27xx: bcm2710: update defconfig"
82da1dfd69 "bcm27xx: bcm2711: update defconfig"

this also highlighted an unrelated kconfig failure
that warrants investigation. But for now it is important
for the bcm27xx target to come back again.

|*
|* Restart config...
|*
|*
|* Allow override default queue discipline
|*
|Allow override default queue discipline (NET_SCH_DEFAULT) [Y/n/?] y
|  Default queuing discipline
|    1. Fair Queue (DEFAULT_FQ) (NEW)
|    2. Controlled Delay (DEFAULT_CODEL) (NEW)
|  > 3. Fair Queue Controlled Delay (DEFAULT_FQ_CODEL)
|    4. Stochastic Fair Queue (DEFAULT_SFQ) (NEW)
|    5. Priority FIFO Fast (DEFAULT_PFIFO_FAST)
|  choice[1-5?]:
|Error in reading or end of file.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2022-02-24 20:45:12 +01:00