a543eeb0aabroadcom-wl: turn on wmm by default, disabling it by default makes no sense, and without it 802.11n does not work (fixes#10918)
Felix Fietkau
2012-02-07 15:45:56 +00:00
bec8df834bath9k: ignore invalid signal strength values in a-mpdu packets, fixes average signal strength display fluctuations
Felix Fietkau
2012-02-07 15:25:55 +00:00
1827efa544iw: update to version 3.3, sync with latest nl80211.h changes
Felix Fietkau
2012-02-07 11:28:21 +00:00
ea63948914mac80211: update to wireless-testing 2012-02-06
Felix Fietkau
2012-02-07 11:28:11 +00:00
e430c864f4kernel: add a recent upstream commit (post-3.3) to the ssb update patch, required for the next mac80211 update
Felix Fietkau
2012-02-07 11:28:06 +00:00
486d54bf05mtd: define MTDREFRESH if not defined (external kernel)
Florian Fainelli
2012-02-06 17:15:40 +00:00
620843b2eeiptables: don't apply patches if building an external kernel
Florian Fainelli
2012-02-06 17:15:36 +00:00
778e5d4fa5brcm63xx: add support for linux 3.3
Jonas Gorski
2012-02-04 10:17:27 +00:00
49874a57f1kernel: fix netfilter layer7 compilation in 3.3
Jonas Gorski
2012-02-04 10:17:14 +00:00
d6afe712abx86: make alix platform patch apply to 3.3
Jonas Gorski
2012-02-03 20:17:00 +00:00
c433bfb571disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config
Jo-Philipp Wich
2012-02-03 19:47:55 +00:00
40867f1b68x86: trivial -- add missing CONFIG_GEOS symbol to top-level So that builds don't stall in x86 prompting for this symbol. [From Philip Prindeville, via http://patchwork.openwrt.org/patch/1828/]
Jo-Philipp Wich
2012-02-03 19:21:41 +00:00
79a3fdb9dageos: backport driver from linux-next to 3.2 and 3.3 The Geos driver is in linux-next and will be out in 3.4. It builds fine against 3.2.2 and 3.3-rc2. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Jo-Philipp Wich
2012-02-03 18:16:27 +00:00
25d605ab0enet5501: backport drivers from linux-next Backport net5501 platform driver from 3.4. Remove vestiges of old (pre-2.6.30) leds-net5501.c driver. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Jo-Philipp Wich
2012-02-03 18:14:02 +00:00
5a61ba4e3aleds.mk: remove obsolete references to leds-alix and leds-net5501 modules These are now supported by platform drivers in arch/x86/platform/geode. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Jo-Philipp Wich
2012-02-03 18:12:30 +00:00
7a36f3d2ffx86: move additional oddball PATA drivers These should only be enabled in the generic image, as they bloat all of the other targets. Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3. Restore PC speaker to Geos target. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Jo-Philipp Wich
2012-02-03 18:02:57 +00:00
d13c3cd073net5501: adjust CFLAGS and package selection (#10893) This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in.
Jo-Philipp Wich
2012-02-03 14:19:29 +00:00
8a29665964ath9k: fix CTS timeout issues in 2.4 ghz
Felix Fietkau
2012-02-03 10:23:55 +00:00
99ab6e575aath9k: fix WEP connection issues
Felix Fietkau
2012-02-03 10:23:51 +00:00
477c3c4015netifd: set the network device in uci state as well to avoid further remapping issues
Felix Fietkau
2012-02-03 10:17:30 +00:00
d9ff9c44eear71xx: add usb on the pb92 board
Felix Fietkau
2012-02-03 09:44:51 +00:00
6e3087b078netifd: update to latest, fixes removing deleted interfaces on config reload
Felix Fietkau
2012-02-02 23:16:34 +00:00
bffa830f13netifd: fix legacy scripts that expect the ifname option to be mapped to the device option after fixup
Felix Fietkau
2012-02-02 23:01:02 +00:00
f99bf6517cx86: add 3.3 generic symbols
Jonas Gorski
2012-02-02 21:01:59 +00:00
b6be49429balix2: backport platform driver updates from linux-next Add patches to x86/patches-3.2 and x86/patches-3.3 (update will appear in 3.4). [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1817/]
Jo-Philipp Wich
2012-02-02 19:26:32 +00:00
7a9e4ffe8ealix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility
Jo-Philipp Wich
2012-02-02 19:11:52 +00:00
bf8bb9b661alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad
Jo-Philipp Wich
2012-02-02 19:06:22 +00:00
047ba1e12ealix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest
Jo-Philipp Wich
2012-02-02 19:00:40 +00:00
a1258ccabageos: backport Geos driver from linux-next Backport of linux-next driver. Driver adds support for LEDS and S/W button. Add hotplug script for button actions. Add Openwrt system config for LEDS triggers. Add updated kernel .config for 3.2 symbols. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1816/]
Jo-Philipp Wich
2012-02-02 18:58:20 +00:00
415a375eaageos: cleanup GPIO driver name In 3.1, the old drivers/char/ entry for the CS5535 GPIO driver went obsolete. Make Geos use a recent kernel and remove this ambiguity. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1815/]
Jo-Philipp Wich
2012-02-02 18:44:35 +00:00
5523eca4e5net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/]
Jo-Philipp Wich
2012-02-02 18:41:10 +00:00
33e4461db6iwinfo: fix segmentation fault when doing two consecutive scans through wpa_supplicant Based on patch by Christian Kapeller <christian.kapeller@cmotion.eu> with one minor whitespace change and updated package version.
Jo-Philipp Wich
2012-02-02 14:06:16 +00:00
eca9950f63kernel: add preliminary support for linux 3.3
Jonas Gorski
2012-02-02 08:23:54 +00:00
c336de3d85kernel: update module names and add new config symbols for linux 3.3
Jonas Gorski
2012-02-02 08:23:44 +00:00
3310df6b52alix2: correct h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver.
Jo-Philipp Wich
2012-02-01 15:31:23 +00:00
1ef07eee4aautomake: forcibly disable perl ithreads support The SDK when build on a machine with perl ithreads enabled will fail to run on many Gentoo systems because perl is usually built without thread capability there. In order to circumvent this issue forcibly disable the ithreads support, tested on CentOS 5.6, Ubuntu 10.04 LTS and Gentoo.
Jo-Philipp Wich
2012-02-01 15:06:36 +00:00
41bd6bd282ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards
Gabor Juhos
2012-01-31 20:49:34 +00:00
c315ce403bar71xx: merge DIR-600 A1 and DIR-615 E4 support
Gabor Juhos
2012-01-31 18:37:29 +00:00
dd47afc197ar71xx: fix ethernet LEDs on the DIR-600-A1 board
Gabor Juhos
2012-01-31 18:37:24 +00:00
8200f0c61aar71xx: unify LED names on D-Link boards
Gabor Juhos
2012-01-31 18:37:15 +00:00
faeca86e50ar71xx: support for D-LINK DIR-615 rev. E4
Gabor Juhos
2012-01-31 18:37:09 +00:00
97e4ddd012ar71xx: add support for TP-Link TL-MR11U
Gabor Juhos
2012-01-31 18:37:01 +00:00
55b5e15bffcreate a config-3.2 for upcoming changes, rebase config-default to 2.6.39
Jo-Philipp Wich
2012-01-30 02:13:37 +00:00
1504738c02rules.mk: filter "." and "./" entries from $PATH, prevents toolchain build issues and likely other problems
Jo-Philipp Wich
2012-01-29 23:34:25 +00:00
1a6ccdc0cfpatch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that
Jo-Philipp Wich
2012-01-29 20:19:06 +00:00
0c3a383974download.pl: remove ftp.geo.kernel.org mirror, it does not resolve
Jo-Philipp Wich
2012-01-29 19:28:12 +00:00
c21b5cc34aext-toolchain.sh: rework generated gcc wrapper Only append -L and -Wl,-rpath-link flags if the command line contains -l, -L, -shared or -static flags; this is needed to suppress "-rpath-link: linker input file unused because linking not done" on each cc invocation.
Jo-Philipp Wich
2012-01-29 18:53:12 +00:00
d5cf09642cpatch-specs.sh: fallback to ext-toolchain.sh --wrap if spec file patching is not possible (gcc < 4.3.0)
Jo-Philipp Wich
2012-01-29 17:42:58 +00:00
86ddf7c7a8ext-toolchain.sh: support --wrap with src == dest
Jo-Philipp Wich
2012-01-29 17:42:10 +00:00
8c4813b75eadd default and Sim.One profiles
Florian Fainelli
2012-01-29 15:00:36 +00:00
0bb50678deadd 3.2 support
Florian Fainelli
2012-01-29 15:00:33 +00:00
e82f06639eadd another 3.2 framebuffer symbol
Florian Fainelli
2012-01-29 15:00:29 +00:00