44 lines
1.5 KiB
Diff
44 lines
1.5 KiB
Diff
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
|
|
Date: Wed, 23 Mar 2016 00:44:40 +0300
|
|
Subject: [PATCH] at803x: fix reset handling
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
The driver of course "knows" that the chip's reset signal is active low,
|
|
so it drives the GPIO to 0 to reset the PHY and to 1 otherwise; however
|
|
all this will only work iff the GPIO is specified as active-high in the
|
|
device tree! I think both the driver and the device trees (if there are
|
|
any -- I was unable to find them) need to be fixed in this case...
|
|
|
|
Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
|
|
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
|
|
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
|
|
--- a/drivers/net/phy/at803x.c
|
|
+++ b/drivers/net/phy/at803x.c
|
|
@@ -250,7 +250,7 @@ static int at803x_probe(struct phy_devic
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
- gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
|
|
+ gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(gpiod_reset))
|
|
return PTR_ERR(gpiod_reset);
|
|
|
|
@@ -377,10 +377,10 @@ static void at803x_link_change_notify(st
|
|
|
|
at803x_context_save(phydev, &context);
|
|
|
|
- gpiod_set_value(priv->gpiod_reset, 0);
|
|
- msleep(1);
|
|
gpiod_set_value(priv->gpiod_reset, 1);
|
|
msleep(1);
|
|
+ gpiod_set_value(priv->gpiod_reset, 0);
|
|
+ msleep(1);
|
|
|
|
at803x_context_restore(phydev, &context);
|
|
|