Ran update_kernel.sh in a fresh clone without any existing toolchains.
Manually rebased:
  pending-5.4/611-netfilter_match_bypass_default_table.patch
The upstream change affecting this patch is the revert of an earlier
kernel commit. Therefore, we just revert our corresponding changes
in [1].
Build system: x86_64
Build-tested: ipq806x/R7800
[1] 9b1b89229f ("kernel: bump 5.4 to 5.4.86")
Signed-off-by: John Audia <graysky@archlinux.us>
[adjust manually rebased patch, add explanation]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
		
	
		
			
				
	
	
		
			72 lines
		
	
	
		
			2.7 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
			
		
		
	
	
			72 lines
		
	
	
		
			2.7 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
From 916df9ddac295df428a304fd03ed492ad10e900c Mon Sep 17 00:00:00 2001
 | 
						|
From: Marc Kleine-Budde <mkl@pengutronix.de>
 | 
						|
Date: Fri, 1 Mar 2019 10:22:26 +0100
 | 
						|
Subject: [PATCH] can: flexcan: remove TX mailbox bit from struct
 | 
						|
 flexcan_priv::rx_mask{1,2}
 | 
						|
 | 
						|
The flexcan IP core has up to 64 mailboxes, each one has a corresponding
 | 
						|
interrupt bit in the iflag1 or iflag2 registers and a mask bit in the
 | 
						|
imask1 or imask2 registers.
 | 
						|
 | 
						|
In the timestamp (i.e. non FIFO) mode the driver needs to mask out all
 | 
						|
non RX interrupt sources and uses the precomputed values rx_mask1 and
 | 
						|
rx_mask2 of struct flexcan_priv for this.
 | 
						|
 | 
						|
Currently these values cannot be used directly, as they contain the TX
 | 
						|
mailbox flag. This patch removes the TX flag from flexcan_priv::rx_mask1
 | 
						|
and flexcan_priv::rx_mask2, and sets the TX flag directly when writing
 | 
						|
the regs->iflag1 and regs->iflag2 into the hardware.
 | 
						|
 | 
						|
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
 | 
						|
---
 | 
						|
 drivers/net/can/flexcan.c | 14 +++++---------
 | 
						|
 1 file changed, 5 insertions(+), 9 deletions(-)
 | 
						|
 | 
						|
--- a/drivers/net/can/flexcan.c
 | 
						|
+++ b/drivers/net/can/flexcan.c
 | 
						|
@@ -886,8 +886,7 @@ static inline u64 flexcan_read_reg_iflag
 | 
						|
 	struct flexcan_regs __iomem *regs = priv->regs;
 | 
						|
 	u32 iflag1, iflag2;
 | 
						|
 
 | 
						|
-	iflag2 = priv->read(®s->iflag2) & priv->rx_mask2 &
 | 
						|
-		~FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
 | 
						|
+	iflag2 = priv->read(®s->iflag2) & priv->rx_mask2;
 | 
						|
 	iflag1 = priv->read(®s->iflag1) & priv->rx_mask1;
 | 
						|
 
 | 
						|
 	return (u64)iflag2 << 32 | iflag1;
 | 
						|
@@ -1234,7 +1233,7 @@ static int flexcan_chip_start(struct net
 | 
						|
 	disable_irq(dev->irq);
 | 
						|
 	priv->write(priv->reg_ctrl_default, ®s->ctrl);
 | 
						|
 	priv->write(priv->rx_mask1, ®s->imask1);
 | 
						|
-	priv->write(priv->rx_mask2, ®s->imask2);
 | 
						|
+	priv->write(priv->rx_mask2 | FLEXCAN_IFLAG2_MB(priv->tx_mb_idx), ®s->imask2);
 | 
						|
 	enable_irq(dev->irq);
 | 
						|
 
 | 
						|
 	/* print chip status */
 | 
						|
@@ -1328,9 +1327,6 @@ static int flexcan_open(struct net_devic
 | 
						|
 	priv->tx_mb_idx = priv->mb_count - 1;
 | 
						|
 	priv->tx_mb = flexcan_get_mb(priv, priv->tx_mb_idx);
 | 
						|
 
 | 
						|
-	priv->rx_mask1 = 0;
 | 
						|
-	priv->rx_mask2 = FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
 | 
						|
-
 | 
						|
 	priv->offload.mailbox_read = flexcan_mailbox_read;
 | 
						|
 
 | 
						|
 	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
 | 
						|
@@ -1341,12 +1337,12 @@ static int flexcan_open(struct net_devic
 | 
						|
 
 | 
						|
 		imask = GENMASK_ULL(priv->offload.mb_last,
 | 
						|
 				    priv->offload.mb_first);
 | 
						|
-		priv->rx_mask1 |= imask;
 | 
						|
-		priv->rx_mask2 |= imask >> 32;
 | 
						|
+		priv->rx_mask1 = imask;
 | 
						|
+		priv->rx_mask2 = imask >> 32;
 | 
						|
 
 | 
						|
 		err = can_rx_offload_add_timestamp(dev, &priv->offload);
 | 
						|
 	} else {
 | 
						|
-		priv->rx_mask1 |= FLEXCAN_IFLAG_RX_FIFO_OVERFLOW |
 | 
						|
+		priv->rx_mask1 = FLEXCAN_IFLAG_RX_FIFO_OVERFLOW |
 | 
						|
 			FLEXCAN_IFLAG_RX_FIFO_AVAILABLE;
 | 
						|
 		err = can_rx_offload_add_fifo(dev, &priv->offload,
 | 
						|
 					      FLEXCAN_NAPI_WEIGHT);
 |