 fa70b3a4bb
			
		
	
	fa70b3a4bb
	
	
	
		
			
			This adds 3 Mikrotik rb4xx series drivers as follows: rb4xx-cpld: This is in the mfd subsystem, and is the parent CPLD device that interfaces between the SoC SPI bus and its two children below. rb4xx-gpio: This is the GPIO expander. rb4xx-nand: This is the NAND driver. The history of this code comes in three phases. 1. The first is a May 2015 attempt to push the equivalient ar71xx rb4xx drivers upstream. See https://lore.kernel.org/patchwork/patch/940880/. Module-author: Gabor Juhos <juhosg@openwrt.org> Module-author: Imre Kaloz <kaloz@openwrt.org> Module-author: Bert Vermeulen <bert@biot.com> 2. Next several ar71xx patches were applied bringing the code current. commit7bbf4117c6Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> commitaf79fdbe4acommit889272d92dcommite21cb649a2commit7c09fa4a74Signed-off-by: Felix Fietkau <nbd@nbd.name> 3. Finally a heavy refactor to split the driver into the three new subsystems, and updated to work with the device tree configuration, plus updates and review feedback incorporated Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: Christopher Hill <ch6574@gmail.com>
		
			
				
	
	
		
			173 lines
		
	
	
		
			4.1 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			173 lines
		
	
	
		
			4.1 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * GPIO driver for the MikroTik RouterBoard 4xx series
 | |
|  *
 | |
|  * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
 | |
|  * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 | |
|  * Copyright (C) 2015 Bert Vermeulen <bert@biot.com>
 | |
|  * Copyright (C) 2020 Christopher Hill <ch6574@gmail.com>
 | |
|  *
 | |
|  * This file was based on the driver for Linux 2.6.22 published by
 | |
|  * MikroTik for their RouterBoard 4xx series devices.
 | |
|  *
 | |
|  * N.B. driver probe reports "DMA mask not set" warnings which are
 | |
|  * an artifact of using a platform_driver as an MFD device child.
 | |
|  * See conversation here https://lkml.org/lkml/2020/4/28/675
 | |
|  */
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/gpio/driver.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/of_device.h>
 | |
| 
 | |
| #include <mfd/rb4xx-cpld.h>
 | |
| 
 | |
| struct rb4xx_gpio {
 | |
| 	struct rb4xx_cpld *cpld;
 | |
| 	struct device *dev;
 | |
| 
 | |
| 	struct gpio_chip chip;
 | |
| 	struct mutex lock;
 | |
| 	u16 values;		/* bitfield of GPIO 0-8 current values */
 | |
| };
 | |
| 
 | |
| static int rb4xx_gpio_cpld_set(struct rb4xx_gpio *gpio, unsigned int offset,
 | |
| 			       int value)
 | |
| {
 | |
| 	struct rb4xx_cpld *cpld = gpio->cpld;
 | |
| 	u16 values;
 | |
| 	int ret;
 | |
| 
 | |
| 	mutex_lock(&gpio->lock);
 | |
| 	values = gpio->values;
 | |
| 
 | |
| 	if (value)
 | |
| 		values |= BIT(offset);
 | |
| 	else
 | |
| 		values &= ~(BIT(offset));
 | |
| 
 | |
| 	if (values == gpio->values) {
 | |
| 		ret = 0;
 | |
| 		goto unlock;
 | |
| 	}
 | |
| 
 | |
| 	if (offset < 8) {
 | |
| 		ret = cpld->gpio_set_0_7(cpld, values & 0xff);
 | |
| 	} else if (offset == 8) {
 | |
| 		ret = cpld->gpio_set_8(cpld, values >> 8);
 | |
| 	}
 | |
| 
 | |
| 	if(likely(!ret))
 | |
| 		gpio->values = values;
 | |
| 
 | |
| unlock:
 | |
| 	mutex_unlock(&gpio->lock);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int rb4xx_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 | |
| {
 | |
| 	return 0; /* All 9 GPIOs are out */
 | |
| }
 | |
| 
 | |
| static int rb4xx_gpio_direction_input(struct gpio_chip *chip,
 | |
| 				      unsigned int offset)
 | |
| {
 | |
| 	return -EOPNOTSUPP;
 | |
| }
 | |
| 
 | |
| static int rb4xx_gpio_direction_output(struct gpio_chip *chip,
 | |
| 				       unsigned int offset, int value)
 | |
| {
 | |
| 	return rb4xx_gpio_cpld_set(gpiochip_get_data(chip), offset, value);
 | |
| }
 | |
| 
 | |
| static int rb4xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
 | |
| {
 | |
| 	struct rb4xx_gpio *gpio = gpiochip_get_data(chip);
 | |
| 	int ret;
 | |
| 
 | |
| 	mutex_lock(&gpio->lock);
 | |
| 	ret = (gpio->values >> offset) & 0x1;
 | |
| 	mutex_unlock(&gpio->lock);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void rb4xx_gpio_set(struct gpio_chip *chip, unsigned int offset,
 | |
| 			   int value)
 | |
| {
 | |
| 	rb4xx_gpio_cpld_set(gpiochip_get_data(chip), offset, value);
 | |
| }
 | |
| 
 | |
| static int rb4xx_gpio_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct device *dev = &pdev->dev;
 | |
| 	struct device *parent = dev->parent;
 | |
| 	struct rb4xx_gpio *gpio;
 | |
| 	u32 val;
 | |
| 
 | |
| 	if (!parent)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
 | |
| 	if (!gpio)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	platform_set_drvdata(pdev, gpio);
 | |
| 	gpio->cpld	= dev_get_drvdata(parent);
 | |
| 	gpio->dev	= dev;
 | |
| 	gpio->values	= 0;
 | |
| 	mutex_init(&gpio->lock);
 | |
| 
 | |
| 	gpio->chip.label		= "rb4xx-gpio";
 | |
| 	gpio->chip.parent		= dev;
 | |
| 	gpio->chip.owner		= THIS_MODULE;
 | |
| 	gpio->chip.get_direction	= rb4xx_gpio_get_direction;
 | |
| 	gpio->chip.direction_input	= rb4xx_gpio_direction_input;
 | |
| 	gpio->chip.direction_output	= rb4xx_gpio_direction_output;
 | |
| 	gpio->chip.get			= rb4xx_gpio_get;
 | |
| 	gpio->chip.set			= rb4xx_gpio_set;
 | |
| 	gpio->chip.ngpio		= 9;
 | |
| 	gpio->chip.base			= -1;
 | |
| 	gpio->chip.can_sleep		= 1;
 | |
| 
 | |
| 	if (!of_property_read_u32(dev->of_node, "base", &val))
 | |
| 		gpio->chip.base = val;
 | |
| 
 | |
| 	return gpiochip_add_data(&gpio->chip, gpio);
 | |
| }
 | |
| 
 | |
| static int rb4xx_gpio_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct rb4xx_gpio *gpio = platform_get_drvdata(pdev);
 | |
| 
 | |
| 	gpiochip_remove(&gpio->chip);
 | |
| 	mutex_destroy(&gpio->lock);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct platform_device_id rb4xx_gpio_id_table[] = {
 | |
| 	{ "mikrotik,rb4xx-gpio", },
 | |
| 	{ },
 | |
| };
 | |
| MODULE_DEVICE_TABLE(platform, rb4xx_gpio_id_table);
 | |
| 
 | |
| static struct platform_driver rb4xx_gpio_driver = {
 | |
| 	.probe = rb4xx_gpio_probe,
 | |
| 	.remove = rb4xx_gpio_remove,
 | |
| 	.id_table = rb4xx_gpio_id_table,
 | |
| 	.driver = {
 | |
| 		.name = "rb4xx-gpio",
 | |
| 	},
 | |
| };
 | |
| 
 | |
| module_platform_driver(rb4xx_gpio_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("Mikrotik RB4xx GPIO driver");
 | |
| MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
 | |
| MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
 | |
| MODULE_AUTHOR("Bert Vermeulen <bert@biot.com>");
 | |
| MODULE_AUTHOR("Christopher Hill <ch6574@gmail.com");
 | |
| MODULE_LICENSE("GPL v2");
 |