5ac34818f9
Currently, dynack was only tested upstream using AP/STA mode. Testing it on IBSS, showed that late-ack detection was broken. This is caused due to dynack using Association Request/Response frames for late-ack detection, which IBSS does not use. Also allowing Authentication frames here solves this. A second issue also got fixed, which was also seen AP/STA mode: When a station was added, the estimated value would be exponentially averaged using 0 as a starting point. This means that on larger distances, the ack timeout was still not high enough before synchronizing would run out of late-ack's for estimation. Fix this by using the initial estimated value as a baseline and only start averaging in the following estimation rounds. Test setup: - 2x identical devices: RB912UAG-5HPnD + 19dB sector - IBSS - 2x2 802.11an (ar9340), HT20, long GI - RSSI's -70 / -71 - Real distance: 23910 meter Results (60s iperf runs): Fixed coverage class 54 (up to 24300m): * 21.5 Mbits/sec Dynack: * 28.9 Mbits/sec Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
89 lines
3.0 KiB
Diff
89 lines
3.0 KiB
Diff
From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
|
|
Date: Fri, 2 Nov 2018 21:49:56 +0100
|
|
Subject: [PATCH] ath9k: dynack: move debug log after buffer increments
|
|
|
|
Move debug log in ath_dynack_sample_tx_ts and ath_dynack_sample_ack_ts
|
|
after timestamp buffer head/tail increments in order to make debugging
|
|
more user friendly
|
|
|
|
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
|
|
---
|
|
|
|
--- a/drivers/net/wireless/ath/ath9k/dynack.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/dynack.c
|
|
@@ -171,11 +171,12 @@ static void ath_dynack_compute_to(struct
|
|
void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
|
|
struct ath_tx_status *ts)
|
|
{
|
|
- u8 ridx;
|
|
struct ieee80211_hdr *hdr;
|
|
struct ath_dynack *da = &ah->dynack;
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
|
+ u32 dur = ts->duration;
|
|
+ u8 ridx;
|
|
|
|
if ((info->flags & IEEE80211_TX_CTL_NO_ACK) || !da->enabled)
|
|
return;
|
|
@@ -203,14 +204,13 @@ void ath_dynack_sample_tx_ts(struct ath_
|
|
ridx = ts->ts_rateindex;
|
|
|
|
da->st_rbf.ts[da->st_rbf.t_rb].tstamp = ts->ts_tstamp;
|
|
- da->st_rbf.ts[da->st_rbf.t_rb].dur = ts->duration;
|
|
ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_dest, hdr->addr1);
|
|
ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_src, hdr->addr2);
|
|
|
|
if (!(info->status.rates[ridx].flags & IEEE80211_TX_RC_MCS)) {
|
|
- u32 phy, sifs;
|
|
const struct ieee80211_rate *rate;
|
|
struct ieee80211_tx_rate *rates = info->status.rates;
|
|
+ u32 phy;
|
|
|
|
rate = &common->sbands[info->band].bitrates[rates[ridx].idx];
|
|
if (info->band == NL80211_BAND_2GHZ &&
|
|
@@ -219,19 +219,18 @@ void ath_dynack_sample_tx_ts(struct ath_
|
|
else
|
|
phy = WLAN_RC_PHY_OFDM;
|
|
|
|
- sifs = ath_dynack_get_sifs(ah, phy);
|
|
- da->st_rbf.ts[da->st_rbf.t_rb].dur -= sifs;
|
|
+ dur -= ath_dynack_get_sifs(ah, phy);
|
|
}
|
|
-
|
|
- ath_dbg(common, DYNACK, "{%pM} tx sample %u [dur %u][h %u-t %u]\n",
|
|
- hdr->addr1, da->st_rbf.ts[da->st_rbf.t_rb].tstamp,
|
|
- da->st_rbf.ts[da->st_rbf.t_rb].dur, da->st_rbf.h_rb,
|
|
- (da->st_rbf.t_rb + 1) % ATH_DYN_BUF);
|
|
+ da->st_rbf.ts[da->st_rbf.t_rb].dur = dur;
|
|
|
|
INCR(da->st_rbf.t_rb, ATH_DYN_BUF);
|
|
if (da->st_rbf.t_rb == da->st_rbf.h_rb)
|
|
INCR(da->st_rbf.h_rb, ATH_DYN_BUF);
|
|
|
|
+ ath_dbg(common, DYNACK, "{%pM} tx sample %u [dur %u][h %u-t %u]\n",
|
|
+ hdr->addr1, ts->ts_tstamp, dur, da->st_rbf.h_rb,
|
|
+ da->st_rbf.t_rb);
|
|
+
|
|
ath_dynack_compute_to(ah);
|
|
|
|
spin_unlock_bh(&da->qlock);
|
|
@@ -258,14 +257,13 @@ void ath_dynack_sample_ack_ts(struct ath
|
|
spin_lock_bh(&da->qlock);
|
|
da->ack_rbf.tstamp[da->ack_rbf.t_rb] = ts;
|
|
|
|
- ath_dbg(common, DYNACK, "rx sample %u [h %u-t %u]\n",
|
|
- da->ack_rbf.tstamp[da->ack_rbf.t_rb],
|
|
- da->ack_rbf.h_rb, (da->ack_rbf.t_rb + 1) % ATH_DYN_BUF);
|
|
-
|
|
INCR(da->ack_rbf.t_rb, ATH_DYN_BUF);
|
|
if (da->ack_rbf.t_rb == da->ack_rbf.h_rb)
|
|
INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
|
|
|
|
+ ath_dbg(common, DYNACK, "rx sample %u [h %u-t %u]\n",
|
|
+ ts, da->ack_rbf.h_rb, da->ack_rbf.t_rb);
|
|
+
|
|
ath_dynack_compute_to(ah);
|
|
|
|
spin_unlock_bh(&da->qlock);
|