edae3479e6
This patch adds supports for the HiWiFi HC5962(gee4) http://www.hiwifi.com Short specification: - MT7621AT + MT7612EN + 7603EN - 256MB DDR3 RAM - 128MB NAND flash - 1+3 x 1000M Ethernet - 1x USB 2.0 port. 1x USB 3.0 port. - reset button - UART pad on PCB (JP3: TX, RX, GND, 3.3V) Flash instruction: 1, Download lede-ramips-mt7621-hc5962-squashfs-factory.bin 2, Login as root via SSH on 192.168.199.1 and then copy factory.bin(using wget or nc or...) to /tmp/ 3, use the following commands: $ mtd write /tmp/lede-ramips-mt7621-hc5962-squashfs-factory.bin firmware $ mtd erase firmware_backup && reboot After reboot you should be able to login as root via SSH on 192.168.1.1 Signed-off-by: ZengFei Zhang <zhangzengfei@kunteng.org>
148 lines
2.2 KiB
Plaintext
148 lines
2.2 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include "mt7621.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "HiWiFi HC5962";
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x10000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
status {
|
|
label = "hc5962:white:status";
|
|
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
system {
|
|
label = "hc5962:red:system";
|
|
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <20>;
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "debug";
|
|
reg = <0x80000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
factory: partition@100000 {
|
|
label = "factory";
|
|
reg = <0x100000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@140000 {
|
|
label = "kernel";
|
|
reg = <0x140000 0x200000>;
|
|
};
|
|
|
|
partition@340000 {
|
|
label = "ubi";
|
|
reg = <0x340000 0x1E00000>;
|
|
};
|
|
|
|
partition@2140000 {
|
|
label = "hw_panic";
|
|
reg = <0x2140000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@21c0000 {
|
|
label = "bdinfo";
|
|
reg = <0x21c0000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@2240000 {
|
|
label = "backup";
|
|
reg = <0x2240000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@22c0000 {
|
|
label = "overly";
|
|
reg = <0x22c0000 0x1000000>;
|
|
};
|
|
|
|
partition@32c0000 {
|
|
label = "firmware_backup";
|
|
reg = <0x32c0000 0x2000000>;
|
|
};
|
|
|
|
partition@52c0000 {
|
|
label = "oem";
|
|
reg = <0x52c0000 0x200000>;
|
|
};
|
|
|
|
partition@54c0000 {
|
|
label = "opt";
|
|
reg = <0x54c0000 0x2ac0000>;
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
|
|
pcie0 {
|
|
mt76@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
device_type = "pci";
|
|
mediatek,mtd-eeprom = <&factory 0x0000>;
|
|
ieee80211-freq-limit = <2400000 2500000>;
|
|
};
|
|
};
|
|
|
|
pcie1 {
|
|
mt76@1,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
device_type = "pci";
|
|
mediatek,mtd-eeprom = <&factory 0x8000>;
|
|
ieee80211-freq-limit = <5000000 6000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
state_default: pinctrl0 {
|
|
gpio {
|
|
ralink,group = "uart3", "jtag";
|
|
ralink,function = "gpio";
|
|
};
|
|
};
|
|
};
|