 3872b422ff
			
		
	
	3872b422ff
	
	
	
		
			
			On boot, kernel log complains no vbus supply is found: `xhci-mtk 1a0c0000.usb: supply vbus not found, using dummy regulator` so add the dts node entries to solve the issue Signed-off-by: Andrew Sim <andrewsimz@gmail.com>
		
			
				
	
	
		
			350 lines
		
	
	
		
			5.9 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			350 lines
		
	
	
		
			5.9 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
| // SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 | |
| 
 | |
| /dts-v1/;
 | |
| #include <dt-bindings/input/input.h>
 | |
| #include <dt-bindings/gpio/gpio.h>
 | |
| 
 | |
| #include "mt7622.dtsi"
 | |
| #include "mt6380.dtsi"
 | |
| 
 | |
| / {
 | |
| 	model = "TOTOLINK A8000RU";
 | |
| 	compatible = "totolink,a8000ru", "mediatek,mt7622";
 | |
| 
 | |
| 	aliases {
 | |
| 		label-mac-device = &gmac0;
 | |
| 		led-boot = &led_status;
 | |
| 		led-failsafe = &led_status;
 | |
| 		led-running = &led_status;
 | |
| 		led-upgrade = &led_status;
 | |
| 		serial0 = &uart0;
 | |
| 	};
 | |
| 
 | |
| 	chosen {
 | |
| 		stdout-path = "serial0:115200n8";
 | |
| 		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
 | |
| 	};
 | |
| 
 | |
| 	cpus {
 | |
| 		cpu@0 {
 | |
| 			proc-supply = <&mt6380_vcpu_reg>;
 | |
| 			sram-supply = <&mt6380_vm_reg>;
 | |
| 		};
 | |
| 
 | |
| 		cpu@1 {
 | |
| 			proc-supply = <&mt6380_vcpu_reg>;
 | |
| 			sram-supply = <&mt6380_vm_reg>;
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	gpio-keys {
 | |
| 		compatible = "gpio-keys";
 | |
| 
 | |
| 		reset {
 | |
| 			label = "reset";
 | |
| 			linux,code = <KEY_RESTART>;
 | |
| 			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 
 | |
| 		wps {
 | |
| 			label = "wps";
 | |
| 			linux,code = <KEY_WPS_BUTTON>;
 | |
| 			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	gpio-leds {
 | |
| 		compatible = "gpio-leds";
 | |
| 
 | |
| 		led_status: status_red {
 | |
| 			label = "red:status";
 | |
| 			gpios = <&pio 81 GPIO_ACTIVE_LOW>;
 | |
| 			default-state = "on";
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	reg_1p8v: regulator-1p8v {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		regulator-name = "fixed-1.8V";
 | |
| 		regulator-min-microvolt = <1800000>;
 | |
| 		regulator-max-microvolt = <1800000>;
 | |
| 		regulator-always-on;
 | |
| 	};
 | |
| 
 | |
| 	reg_3p3v: regulator-3p3v {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		regulator-name = "fixed-3.3V";
 | |
| 		regulator-min-microvolt = <3300000>;
 | |
| 		regulator-max-microvolt = <3300000>;
 | |
| 		regulator-boot-on;
 | |
| 		regulator-always-on;
 | |
| 	};
 | |
| 
 | |
| 	reg_5v: regulator-5v {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		regulator-name = "fixed-5V";
 | |
| 		regulator-min-microvolt = <5000000>;
 | |
| 		regulator-max-microvolt = <5000000>;
 | |
| 		regulator-boot-on;
 | |
| 		regulator-always-on;
 | |
| 	};
 | |
| 
 | |
| 	rtkgsw: rtkgsw@0 {
 | |
| 		compatible = "mediatek,rtk-gsw";
 | |
| 		mediatek,ethsys = <ðsys>;
 | |
| 		mediatek,mdio = <&mdio>;
 | |
| 		mediatek,reset-pin = <&pio 54 0>;
 | |
| 		status = "okay";
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &pcie0 {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&pcie0_pins>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &slot0 {
 | |
| 	mt7615@0,0 {
 | |
| 		reg = <0x0000 0 0 0 0>;
 | |
| 		mediatek,mtd-eeprom = <&factory 0x5000>;
 | |
| 		ieee80211-freq-limit = <5490000 6000000>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &pcie1 {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&pcie1_pins>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &slot1 {
 | |
| 	mt7615@0,0 {
 | |
| 		reg = <0x0000 0 0 0 0>;
 | |
| 		mediatek,mtd-eeprom = <&factory 0x10000>;
 | |
| 		ieee80211-freq-limit = <5000000 5490000>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &pio {
 | |
| 	eth_pins: eth-pins {
 | |
| 		mux {
 | |
| 			function = "eth";
 | |
| 			groups = "mdc_mdio", "rgmii_via_gmac2";
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	pcie0_pins: pcie0-pins {
 | |
| 		mux {
 | |
| 			function = "pcie";
 | |
| 			groups = "pcie0_pad_perst",
 | |
| 				 "pcie0_1_waken",
 | |
| 				 "pcie0_1_clkreq";
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	pcie1_pins: pcie1-pins {
 | |
| 		mux {
 | |
| 			function = "pcie";
 | |
| 			groups = "pcie1_pad_perst",
 | |
| 				 "pcie1_0_waken",
 | |
| 				 "pcie1_0_clkreq";
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	pmic_bus_pins: pmic-bus-pins {
 | |
| 		mux {
 | |
| 			function = "pmic";
 | |
| 			groups = "pmic_bus";
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	/* serial NAND is shared pin with SPI-NOR */
 | |
| 	serial_nand_pins: serial-nand-pins {
 | |
| 		mux {
 | |
| 			function = "flash";
 | |
| 			groups = "snfi";
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	uart0_pins: uart0-pins {
 | |
| 		mux {
 | |
| 			function = "uart";
 | |
| 			groups = "uart0_0_tx_rx" ;
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	watchdog_pins: watchdog-pins {
 | |
| 		mux {
 | |
| 			function = "watchdog";
 | |
| 			groups = "watchdog";
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	epa_elna_pins: epa-elna-pins {
 | |
| 		mux {
 | |
| 			function = "antsel";
 | |
| 			groups = "antsel0", "antsel1", "antsel2", "antsel3",
 | |
| 				"antsel4", "antsel5", "antsel6", "antsel7",
 | |
| 				"antsel8", "antsel9", "antsel12", "antsel13",
 | |
| 				"antsel14", "antsel15", "antsel16", "antsel17";
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | |
| ð {
 | |
| 	status = "okay";
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <ð_pins>;
 | |
| 
 | |
| 	gmac0: mac@0 {
 | |
| 		compatible = "mediatek,eth-mac";
 | |
| 		reg = <0>;
 | |
| 		nvmem-cells = <&macaddr_factory_2a>;
 | |
| 		nvmem-cell-names = "mac-address";
 | |
| 		phy-connection-type = "2500base-x";
 | |
| 		fixed-link {
 | |
| 			speed = <2500>;
 | |
| 			full-duplex;
 | |
| 			pause;
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	gmac1: mac@1 {
 | |
| 		compatible = "mediatek,eth-mac";
 | |
| 		reg = <1>;
 | |
| 		phy-mode = "rgmii";
 | |
| 		nvmem-cells = <&macaddr_factory_24>;
 | |
| 		nvmem-cell-names = "mac-address";
 | |
| 		fixed-link {
 | |
| 			speed = <1000>;
 | |
| 			full-duplex;
 | |
| 			pause;
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	mdio: mdio-bus {
 | |
| 		#address-cells = <1>;
 | |
| 		#size-cells = <0>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &pwrap {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&pmic_bus_pins>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &bch {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &snfi {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&serial_nand_pins>;
 | |
| 	status = "okay";
 | |
| 	flash@0 {
 | |
| 		compatible = "spi-nand";
 | |
| 		reg = <0>;
 | |
| 		spi-tx-bus-width = <4>;
 | |
| 		spi-rx-bus-width = <4>;
 | |
| 		nand-ecc-engine = <&snfi>;
 | |
| 		mediatek,bmt-v2;
 | |
| 
 | |
| 		partitions {
 | |
| 			compatible = "fixed-partitions";
 | |
| 			#address-cells = <1>;
 | |
| 			#size-cells = <1>;
 | |
| 
 | |
| 			partition@0 {
 | |
| 				label = "Preloader";
 | |
| 				reg = <0x0 0x80000>;
 | |
| 				read-only;
 | |
| 			};
 | |
| 
 | |
| 			partition@80000 {
 | |
| 				label = "ATF";
 | |
| 				reg = <0x80000 0x40000>;
 | |
| 				read-only;
 | |
| 			};
 | |
| 
 | |
| 			partition@c0000 {
 | |
| 				label = "u-boot";
 | |
| 				reg = <0xc0000 0x80000>;
 | |
| 				read-only;
 | |
| 			};
 | |
| 
 | |
| 			partition@140000 {
 | |
| 				label = "u-boot-env";
 | |
| 				reg = <0x140000 0x80000>;
 | |
| 				read-only;
 | |
| 			};
 | |
| 
 | |
| 			factory: partition@1c0000 {
 | |
| 				label = "factory";
 | |
| 				reg = <0x1c0000 0x40000>;
 | |
| 				read-only;
 | |
| 			};
 | |
| 
 | |
| 			partition@200000 {
 | |
| 				label = "ubi";
 | |
| 				reg = <0x200000 0x6400000>;
 | |
| 			};
 | |
| 
 | |
| 			partition@6600000 {
 | |
| 				label = "User_data";
 | |
| 				reg = <0x6600000 0x100000>;
 | |
| 			};
 | |
| 
 | |
| 			/* size of this partition varies due to BMT & bad blocks. */
 | |
| 			partition@6700000 {
 | |
| 				label = "reserved";
 | |
| 				reg = <0x6700000 0>;
 | |
| 			};
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &factory {
 | |
| 	compatible = "nvmem-cells";
 | |
| 	#address-cells = <1>;
 | |
| 	#size-cells = <1>;
 | |
| 
 | |
| 	macaddr_factory_24: macaddr@24 {
 | |
| 		reg = <0x24 0x6>;
 | |
| 	};
 | |
| 
 | |
| 	macaddr_factory_2a: macaddr@2a {
 | |
| 		reg = <0x2a 0x6>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &ssusb {
 | |
| 	vusb33-supply = <®_3p3v>;
 | |
| 	vbus-supply = <®_5v>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &u3phy {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &uart0 {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&uart0_pins>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &watchdog {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&watchdog_pins>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &wmac {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&epa_elna_pins>;
 | |
| 	mediatek,mtd-eeprom = <&factory 0x0>;
 | |
| 	status = "okay";
 | |
| };
 |