20ea6adbf1
Build system: x86_64 Build-tested: bcm2708, bcm2709, bcm2710, bcm2711 Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B Signed-off-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
131 lines
3.5 KiB
Diff
131 lines
3.5 KiB
Diff
From d46001f333424af540e02d2a19c11205d40a11f3 Mon Sep 17 00:00:00 2001
|
|
From: Naushir Patuck <naush@raspberrypi.com>
|
|
Date: Thu, 7 May 2020 15:50:54 +0100
|
|
Subject: [PATCH] dt-bindings: media: i2c: Add IMX477 CMOS sensor
|
|
binding
|
|
|
|
Add YAML device tree binding for IMX477 CMOS image sensor.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
---
|
|
.../devicetree/bindings/media/i2c/imx477.yaml | 113 ++++++++++++++++++
|
|
1 file changed, 113 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx477.yaml
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/media/i2c/imx477.yaml
|
|
@@ -0,0 +1,113 @@
|
|
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
+%YAML 1.2
|
|
+---
|
|
+$id: http://devicetree.org/schemas/media/i2c/imx477.yaml#
|
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
+
|
|
+title: Sony 1/2.3-Inch 12Mpixel CMOS Digital Image Sensor
|
|
+
|
|
+maintainers:
|
|
+ - Naushir Patuck <naush@raspberypi.com>
|
|
+
|
|
+description: |-
|
|
+ The Sony IMX477 is a 1/2.3-inch CMOS active pixel digital image sensor
|
|
+ with an active array size of 4056H x 3040V. It is programmable through
|
|
+ I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
|
|
+ Image data is sent through MIPI CSI-2, which is configured as either 2 or
|
|
+ 4 data lanes.
|
|
+
|
|
+properties:
|
|
+ compatible:
|
|
+ const: sony,imx477
|
|
+
|
|
+ reg:
|
|
+ description: I2C device address
|
|
+ maxItems: 1
|
|
+
|
|
+ clocks:
|
|
+ maxItems: 1
|
|
+
|
|
+ VDIG-supply:
|
|
+ description:
|
|
+ Digital I/O voltage supply, 1.05 volts
|
|
+
|
|
+ VANA-supply:
|
|
+ description:
|
|
+ Analog voltage supply, 2.8 volts
|
|
+
|
|
+ VDDL-supply:
|
|
+ description:
|
|
+ Digital core voltage supply, 1.8 volts
|
|
+
|
|
+ reset-gpios:
|
|
+ description: |-
|
|
+ Reference to the GPIO connected to the xclr pin, if any.
|
|
+ Must be released (set high) after all all supplies and INCK are applied.
|
|
+
|
|
+ # See ../video-interfaces.txt for more details
|
|
+ port:
|
|
+ type: object
|
|
+ properties:
|
|
+ endpoint:
|
|
+ type: object
|
|
+ properties:
|
|
+ data-lanes:
|
|
+ description: |-
|
|
+ The sensor supports either two-lane, or four-lane operation.
|
|
+ For two-lane operation the property must be set to <1 2>.
|
|
+ items:
|
|
+ - const: 1
|
|
+ - const: 2
|
|
+
|
|
+ clock-noncontinuous:
|
|
+ type: boolean
|
|
+ description: |-
|
|
+ MIPI CSI-2 clock is non-continuous if this property is present,
|
|
+ otherwise it's continuous.
|
|
+
|
|
+ link-frequencies:
|
|
+ allOf:
|
|
+ - $ref: /schemas/types.yaml#/definitions/uint64-array
|
|
+ description:
|
|
+ Allowed data bus frequencies.
|
|
+
|
|
+ required:
|
|
+ - link-frequencies
|
|
+
|
|
+required:
|
|
+ - compatible
|
|
+ - reg
|
|
+ - clocks
|
|
+ - VANA-supply
|
|
+ - VDIG-supply
|
|
+ - VDDL-supply
|
|
+ - port
|
|
+
|
|
+additionalProperties: false
|
|
+
|
|
+examples:
|
|
+ - |
|
|
+ i2c0 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ imx477: sensor@10 {
|
|
+ compatible = "sony,imx477";
|
|
+ reg = <0x1a>;
|
|
+ clocks = <&imx477_clk>;
|
|
+ VANA-supply = <&imx477_vana>; /* 2.8v */
|
|
+ VDIG-supply = <&imx477_vdig>; /* 1.05v */
|
|
+ VDDL-supply = <&imx477_vddl>; /* 1.8v */
|
|
+
|
|
+ port {
|
|
+ imx477_0: endpoint {
|
|
+ remote-endpoint = <&csi1_ep>;
|
|
+ data-lanes = <1 2>;
|
|
+ clock-noncontinuous;
|
|
+ link-frequencies = /bits/ 64 <450000000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+...
|