95b0c07a61
Hardware
--------
CPU: Qualcomm IPQ4019
RAM: 256M
FLASH: 128M NAND
ETH: QCA8075
VDSL: Intel/Lantiq VRX518 PCIe attached
currently not supported
DECT: Dialog SC14448
currently not supported
WiFi2: IPQ4019 2T2R 2SS b/g/n
WiFi5: IPQ4019 2T2R 2SS n/ac
LED: - Power/DSL green
- WLAN green
- FON/DECT green
- Connect/WPS green
- Info green
- Info red
BTN: - WLAN
- FON
- WPS/Connect
UART: 115200n8 3.3V (located under the Dialog chip)
VCC - RX - TX - GND (Square is VCC)
Installation
------------
1. Grab the uboot for the Device from the 'u-boot-fritz7530'
subdirectory. Place it in the same directory as the 'eva_ramboot.py'
script. It is located in the 'scripts/flashing' subdirectory of the
OpenWRT tree.
2. Assign yourself the IP address 192.168.178.10/24. Connect your
Computer to one of the boxes LAN ports.
3. Connect Power to the Box. As soon as the LAN port of your computer
shows link, load the U-Boot to the box using following command.
> ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz7530.bin
4. The U-Boot will now start. Now assign yourself the IP address
192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
server root directory and rename it to 'FRITZ7530.bin'.
5. The Box will now boot OpenWRT from RAM. This can take up to two
minutes.
6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
scp. SSH into the Box and first write the Bootloader to both previous
kernel partitions.
> mtd write /path/to/uboot-fritz7530.bin uboot0
> mtd write /path/to/uboot-fritz7530.bin uboot1
7. Remove the AVM filesystem partitions to make room for our kernel +
rootfs + overlayfs.
> ubirmvol /dev/ubi0 --name=avm_filesys_0
> ubirmvol /dev/ubi0 --name=avm_filesys_1
8. Flash OpenWRT peristently using sysupgrade.
> sysupgrade -n /path/to/openwrt-sysupgrade.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
[removed pcie-dts range node, refreshed on top of AP120-AC/E2600AC]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
67 lines
1.6 KiB
Makefile
67 lines
1.6 KiB
Makefile
#
|
|
# Copyright (C) 2013-2014 OpenWrt.org
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/kernel.mk
|
|
|
|
PKG_SOURCE_URL:=https://github.com/chunkeey/FritzBox-4040-UBOOT
|
|
PKG_SOURCE_PROTO:=git
|
|
PKG_SOURCE_VERSION:=d306cce36f98a0a67becc42f20df4b22f1d1465f
|
|
PKG_SOURCE_DATE:=2019-02-08
|
|
PKG_MIRROR_HASH:=715380605dd0cd6ffd65a18b34127bd57dfe9fb0a0164bf8aca703ee018d8070
|
|
|
|
PKG_RELEASE:=1
|
|
|
|
include $(INCLUDE_DIR)/u-boot.mk
|
|
include $(INCLUDE_DIR)/package.mk
|
|
|
|
define U-Boot/Default
|
|
BUILD_TARGET:=ipq40xx
|
|
UBOOT_BOARD:=$(1)
|
|
UBOOT_IMAGE:=uboot-$(1).bin
|
|
endef
|
|
|
|
define U-Boot/fritz4040
|
|
NAME:=FritzBox 4040
|
|
BUILD_DEVICES:=avm_fritzbox-4040
|
|
endef
|
|
|
|
define U-Boot/fritz7530
|
|
NAME:=FritzBox 7530
|
|
BUILD_DEVICES:=avm_fritzbox-7530
|
|
endef
|
|
|
|
UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes
|
|
UBOOT_MAKE_FLAGS = USE_PRIVATE_LIBGCC=yes
|
|
export DTC
|
|
|
|
define Build/Configure
|
|
$(Build/Configure/U-Boot)
|
|
$(HOSTCC) -o $(PKG_BUILD_DIR)/fritz/lzma2eva $(PKG_BUILD_DIR)/fritz/src/lzma2eva.c
|
|
$(HOSTCC) -o $(PKG_BUILD_DIR)/fritz/tichksum $(PKG_BUILD_DIR)/fritz/src/tichksum.c
|
|
ln -sf $(STAGING_DIR_HOST)/bin/lzma $(PKG_BUILD_DIR)/fritz
|
|
endef
|
|
|
|
define Build/Compile
|
|
$(Build/Compile/U-Boot)
|
|
(cd $(PKG_BUILD_DIR); ./fritz/fritzcreator.sh $(UBOOT_BOARD);)
|
|
endef
|
|
|
|
define Build/InstallDev
|
|
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
|
|
$(CP) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/$(UBOOT_IMAGE)
|
|
endef
|
|
|
|
define Package/u-boot/install
|
|
$(Package/u-boot/install/default)
|
|
$(INSTALL_BIN) $(PKG_BUILD_DIR)/upload-to-f4040.sh $(1)/
|
|
endef
|
|
|
|
UBOOT_TARGETS := fritz4040 fritz7530
|
|
|
|
$(eval $(call BuildPackage/U-Boot))
|