Tobias Welz d0b229f553
ramips: correct WizFi630S pin mappings ...
WizFi630S had some pins changed in the release version of the board.
The run led, wps button and a slide switch where affected.
This patch is correcting this.
i2c is removed as it is sharing a pin with the run (system) led.
uart2 is enabled as it is also enabled in the OEM firmware.
Signed-off-by: Tobias Welz <tw@wiznet.eu >
2020-08-06 13:33:26 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-07-27 20:15:10 +02:00
2020-08-06 12:37:04 +02:00
2020-06-23 09:29:00 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-07-31 18:34:40 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:51:51 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-06-03 10:50:01 +01:00
2020-08-06 12:42:43 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-07-09 10:28:40 +02:00
2020-08-06 12:37:04 +02:00
2020-07-25 21:04:11 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 13:33:26 +02:00
2020-08-06 12:37:04 +02:00
2020-07-29 01:40:20 +02:00
2020-07-04 21:12:42 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-08-06 12:37:04 +02:00
2020-07-08 16:07:05 +02:00
d0b229f553