f2b7d9dc1c
The following adds the Aerohive HiveAP-330 Access Point to LEDE under
the mpc85xx/p1020 subtarget.
Hardware:
- SoC: Freescale P1020NSE2DFB
- NAND: Intel JS28F512M29EWH 64MB
- Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- 5.0GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- Eth2: Atheros AR8035-A
- TPM: Atmel AT97SC3204
- LED Driver: TI LP5521
Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
dhcp;
tftpboot 0x1000000 192.168.1.101:lede-
mpc85xx-p1020-hiveap-330-initramfs.zImage;
tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt;
bootm 0x1000000 - 0x6000000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NAND.
sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
31 lines
1007 B
Diff
31 lines
1007 B
Diff
--- a/arch/powerpc/platforms/85xx/Kconfig
|
|
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
|
@@ -48,6 +48,17 @@ config BSC9132_QDS
|
|
and dual StarCore SC3850 DSP cores.
|
|
Manufacturer : Freescale Semiconductor, Inc
|
|
|
|
+config HIVEAP_330
|
|
+ bool "Aerohive HiveAP-330"
|
|
+ select DEFAULT_UIMAGE
|
|
+ select ARCH_REQUIRE_GPIOLIB
|
|
+ select GPIO_MPC8XXX
|
|
+ help
|
|
+ This option enables support for the Aerohive HiveAP-330 board.
|
|
+
|
|
+ This board is a Concurrent Dual-Band wireless access point with a
|
|
+ Freescale P1020 SoC.
|
|
+
|
|
config MPC8540_ADS
|
|
bool "Freescale MPC8540 ADS"
|
|
select DEFAULT_UIMAGE
|
|
--- a/arch/powerpc/platforms/85xx/Makefile
|
|
+++ b/arch/powerpc/platforms/85xx/Makefile
|
|
@@ -9,6 +9,7 @@ obj-y += common.o
|
|
obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
|
|
obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
|
|
obj-$(CONFIG_C293_PCIE) += c293pcie.o
|
|
+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
|
|
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
|
|
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
|
|
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
|