765f66810a
Hardware
--------
SoC: NXP P1010 (1x e500 @ 800MHz)
RAM: 256M DDR3 (2x Samsung K4B1G1646G-BCH9)
FLASH: 32M NOR (Spansion S25FL256S)
BTN: 1x Reset
WiFi: 1x Atheros AR9590 2.4 bgn 3x3
2x Atheros AR9590 5.0 an 3x3
ETH: 2x Gigabit Ethernet (Atheros AR8033 / AR8035)
UART: 115200 8N1 (RJ-45 Cisco)
Installation
------------
1. Grab the OpenWrt initramfs, rename it to ap3715.bin. Place it in
the root directory of a TFTP server and serve it at
192.168.1.66/24.
2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot
by pressing Enter when prompted. Credentials are identical to the one
in the APs interface. By default it is admin / new2day.
3. Alter the bootcmd in U-Boot:
$ setenv ramboot_openwrt "setenv ipaddr 192.168.1.1;
setenv serverip 192.168.1.66; tftpboot 0x2000000 ap3715.bin; bootm"
$ setenv boot_openwrt "sf probe 0; sf read 0x2000000 0x140000 0x1000000;
bootm 0x2000000"
$ setenv bootcmd "run boot_openwrt"
$ saveenv
4. Boot the initramfs image
$ run ramboot_openwrt
5. Transfer the OpenWrt sysupgrade image to the AP using SCP. Install
using sysupgrade.
$ sysupgrade -n <path-to-sysupgrade.bin>
Signed-off-by: David Bauer <mail@david-bauer.net>
27 lines
618 B
Plaintext
27 lines
618 B
Plaintext
CONFIG_AT803X_PHY=y
|
|
CONFIG_CMDLINE_OVERRIDE=y
|
|
# CONFIG_FSL_CORENET_CF is not set
|
|
CONFIG_GPIO_74X164=y
|
|
CONFIG_MTD_NAND_FSL_IFC=y
|
|
CONFIG_MTD_SPLIT_FIRMWARE=y
|
|
CONFIG_MTD_SPLIT_TPLINK_FW=y
|
|
CONFIG_MTD_SPLIT_UIMAGE_FW=y
|
|
CONFIG_MTD_UBI=y
|
|
CONFIG_MTD_UBI_BEB_LIMIT=20
|
|
CONFIG_MTD_UBI_BLOCK=y
|
|
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
|
CONFIG_NET_DEVLINK=y
|
|
CONFIG_NET_DSA=y
|
|
CONFIG_NET_DSA_QCA8K=y
|
|
CONFIG_NET_DSA_TAG_QCA=y
|
|
CONFIG_NET_SWITCHDEV=y
|
|
CONFIG_PHYLINK=y
|
|
CONFIG_REALTEK_PHY=y
|
|
CONFIG_RED_15W_REV1=y
|
|
CONFIG_REGMAP=y
|
|
CONFIG_REGULATOR=y
|
|
CONFIG_SPI_GPIO=y
|
|
CONFIG_TL_WDR4900_V1=y
|
|
CONFIG_UBIFS_FS=y
|
|
CONFIG_WS_AP3715I=y
|
|
CONFIG_FIREBOX_T10=y |