Use the GPIO dt-bindings macros and add compatible strings in the ramips device tree source files. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
		
			
				
	
	
		
			112 lines
		
	
	
		
			1.5 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			112 lines
		
	
	
		
			1.5 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
#include "mt7620a.dtsi"
 | 
						|
 | 
						|
#include <dt-bindings/gpio/gpio.h>
 | 
						|
#include <dt-bindings/input/input.h>
 | 
						|
 | 
						|
/ {
 | 
						|
	compatible = "lenovo,y1", "ralink,mt7620a-soc";
 | 
						|
 | 
						|
	chosen {
 | 
						|
		bootargs = "console=ttyS0,115200";
 | 
						|
	};
 | 
						|
 | 
						|
	gpio-keys-polled {
 | 
						|
		compatible = "gpio-keys-polled";
 | 
						|
		#address-cells = <1>;
 | 
						|
		#size-cells = <0>;
 | 
						|
		poll-interval = <20>;
 | 
						|
 | 
						|
		reset {
 | 
						|
			label = "reset";
 | 
						|
			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
 | 
						|
			linux,code = <KEY_RESTART>;
 | 
						|
		};
 | 
						|
	};
 | 
						|
};
 | 
						|
	
 | 
						|
&gpio0 {
 | 
						|
	status = "okay";
 | 
						|
};
 | 
						|
 | 
						|
&gpio2 {
 | 
						|
	status = "okay";
 | 
						|
};
 | 
						|
 | 
						|
&gpio3 {
 | 
						|
	status = "okay";
 | 
						|
};
 | 
						|
 | 
						|
&spi0 {
 | 
						|
	status = "okay";
 | 
						|
 | 
						|
	m25p80@0 {
 | 
						|
		#address-cells = <1>;
 | 
						|
		#size-cells = <1>;
 | 
						|
		compatible = "jedec,spi-nor";
 | 
						|
		reg = <0>;
 | 
						|
		spi-max-frequency = <10000000>;
 | 
						|
 | 
						|
		partition@0 {
 | 
						|
			label = "u-boot";
 | 
						|
			reg = <0x0 0x30000>;
 | 
						|
			read-only;
 | 
						|
		};
 | 
						|
 | 
						|
		partition@30000 {
 | 
						|
			label = "u-boot-env";
 | 
						|
			reg = <0x30000 0x10000>;
 | 
						|
			read-only;
 | 
						|
		};
 | 
						|
 | 
						|
		factory: partition@40000 {
 | 
						|
			label = "factory";
 | 
						|
			reg = <0x40000 0x10000>;
 | 
						|
			read-only;
 | 
						|
		};
 | 
						|
 | 
						|
		partition@50000 {
 | 
						|
			label = "firmware";
 | 
						|
			reg = <0x50000 0xfb0000>;
 | 
						|
		};
 | 
						|
	};
 | 
						|
};
 | 
						|
 | 
						|
&ehci {
 | 
						|
	status = "okay";
 | 
						|
};
 | 
						|
 | 
						|
&ohci {
 | 
						|
	status = "okay";
 | 
						|
};
 | 
						|
 | 
						|
&pcie {
 | 
						|
	status = "okay";
 | 
						|
 | 
						|
	pcie-bridge {
 | 
						|
		mt76@0,0 {
 | 
						|
			reg = <0x0000 0 0 0 0>;
 | 
						|
			device_type = "pci";
 | 
						|
			mediatek,mtd-eeprom = <&factory 0x8000>;
 | 
						|
			ieee80211-freq-limit = <5000000 6000000>;
 | 
						|
		};
 | 
						|
	};
 | 
						|
};
 | 
						|
	
 | 
						|
&wmac {
 | 
						|
	ralink,mtd-eeprom = <&factory 0>;
 | 
						|
};
 | 
						|
 | 
						|
&pinctrl {
 | 
						|
	state_default: pinctrl0 {
 | 
						|
		gpio {
 | 
						|
			ralink,group = "uartf", "wled", "nd_sd";
 | 
						|
			ralink,function = "gpio";
 | 
						|
		};
 | 
						|
 | 
						|
		pa {
 | 
						|
			ralink,group = "pa";
 | 
						|
			ralink,function = "pa";
 | 
						|
		};
 | 
						|
	};
 | 
						|
};
 |