domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
dcbbac55edbcc97e1ba320149eba886d3ab901b0
openwrt_NSS_ACW/target/linux/layerscape/patches-4.9/302-dts-support-layercape.patch
Stijn Tintel d2fdece2e1 layerscape: refresh patches 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 16:34:37 +03:00

9945 lines
260 KiB
Diff
Raw Blame History

From 2b2e3b9a0d2abf276b40843f75d97b623e4ee109 Mon Sep 17 00:00:00 2001
From: Yangbo Lu <yangbo.lu@nxp.com>
Date: Mon, 25 Sep 2017 10:02:10 +0800
Subject: [PATCH] dts: support layercape
This is a integrated patch for layerscape dts support.
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@freescale.com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Meng Yi <meng.yi@nxp.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
arch/arm/boot/dts/alpine.dtsi | 2 +-
arch/arm/boot/dts/axm55xx.dtsi | 2 +-
arch/arm/boot/dts/ecx-2000.dts | 2 +-
arch/arm/boot/dts/imx6ul.dtsi | 4 +-
arch/arm/boot/dts/keystone.dtsi | 4 +-
arch/arm/boot/dts/ls1021a-qds.dts | 13 +
arch/arm/boot/dts/ls1021a-twr.dts | 13 +
arch/arm/boot/dts/ls1021a.dtsi | 155 ++--
arch/arm/boot/dts/mt6580.dtsi | 2 +-
arch/arm/boot/dts/mt6589.dtsi | 2 +-
arch/arm/boot/dts/mt8127.dtsi | 2 +-
arch/arm/boot/dts/mt8135.dtsi | 2 +-
arch/arm/boot/dts/rk3288.dtsi | 2 +-
arch/arm/boot/dts/sun6i-a31.dtsi | 2 +-
arch/arm/boot/dts/sun7i-a20.dtsi | 4 +-
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 2 +-
arch/arm/boot/dts/sun9i-a80.dtsi | 2 +-
arch/arm64/boot/dts/freescale/Makefile | 16 +
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 134 +++
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 155 ++++
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 91 +++
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 517 ++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi | 45 +
.../boot/dts/freescale/fsl-ls1043a-qds-sdk.dts | 69 ++
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 171 +++-
.../boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts | 69 ++
.../boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts | 117 +++
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 113 ++-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 302 ++++++-
arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi | 48 ++
.../boot/dts/freescale/fsl-ls1046a-qds-sdk.dts | 109 +++
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 363 ++++++++
.../boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts | 76 ++
.../boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts | 110 +++
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 218 +++++
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 793 ++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 173 ++++
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 236 ++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 816 ++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 191 ++---
arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts | 169 ++--
arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts | 9 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 763 +++--------------
arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts | 161 ++++
arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts | 162 ++++
arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 140 ++++
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 195 +++++
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 198 +++++
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 161 ++++
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 910 +++++++++++++++++++++
.../boot/dts/freescale/qoriq-bman1-portals.dtsi | 81 ++
arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi | 66 ++
.../boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi | 43 +
.../boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi | 43 +
.../boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi | 42 +
.../boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi | 42 +
.../boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi | 42 +
.../boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi | 42 +
.../boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi | 42 +
.../boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi | 42 +
.../boot/dts/freescale/qoriq-fman3-0-6oh.dtsi | 47 ++
arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi | 130 +++
.../boot/dts/freescale/qoriq-qman1-portals.dtsi | 104 +++
arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi | 10 +
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi | 4 +-
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi | 4 +-
66 files changed, 7778 insertions(+), 1021 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-6oh.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/alpine.dtsi
@@ -93,7 +93,7 @@
interrupt-controller;
reg = <0x0 0xfb001000 0x0 0x1000>,
<0x0 0xfb002000 0x0 0x2000>,
- <0x0 0xfb004000 0x0 0x1000>,
+ <0x0 0xfb004000 0x0 0x2000>,
<0x0 0xfb006000 0x0 0x2000>;
interrupts =
<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
--- a/arch/arm/boot/dts/axm55xx.dtsi
+++ b/arch/arm/boot/dts/axm55xx.dtsi
@@ -62,7 +62,7 @@
#address-cells = <0>;
interrupt-controller;
reg = <0x20 0x01001000 0 0x1000>,
- <0x20 0x01002000 0 0x1000>,
+ <0x20 0x01002000 0 0x2000>,
<0x20 0x01004000 0 0x2000>,
<0x20 0x01006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -99,7 +99,7 @@
interrupt-controller;
interrupts = <1 9 0xf04>;
reg = <0xfff11000 0x1000>,
- <0xfff12000 0x1000>,
+ <0xfff12000 0x2000>,
<0xfff14000 0x2000>,
<0xfff16000 0x2000>;
};
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -89,11 +89,11 @@
};
intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a7-gic";
+ compatible = "arm,gic-400", "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
- <0x00a02000 0x1000>,
+ <0x00a02000 0x2000>,
<0x00a04000 0x2000>,
<0x00a06000 0x2000>;
};
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -30,12 +30,12 @@
};
gic: interrupt-controller {
- compatible = "arm,cortex-a15-gic";
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x02561000 0x0 0x1000>,
<0x0 0x02562000 0x0 0x2000>,
- <0x0 0x02564000 0x0 0x1000>,
+ <0x0 0x02564000 0x0 0x2000>,
<0x0 0x02566000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -124,6 +124,19 @@
};
};
+&qspi {
+ num-cs = <2>;
+ status = "okay";
+
+ qflash0: s25fl128s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
&enet0 {
tbi-handle = <&tbi0>;
phy-handle = <&sgmii_phy1c>;
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -142,6 +142,19 @@
};
};
+&qspi {
+ num-cs = <2>;
+ status = "okay";
+
+ qflash0: n25q128a13@0 {
+ compatible = "n25q128a13", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
&enet0 {
tbi-handle = <&tbi1>;
phy-handle = <&sgmii_phy2>;
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -74,17 +74,24 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0xf00>;
- clocks = <&cluster1_clk>;
+ clocks = <&clockgen 1 0>;
};
cpu@f01 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0xf01>;
- clocks = <&cluster1_clk>;
+ clocks = <&clockgen 1 0>;
};
};
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -108,11 +115,11 @@
ranges;
gic: interrupt-controller@1400000 {
- compatible = "arm,cortex-a7-gic";
+ compatible = "arm,gic-400", "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x1401000 0x0 0x1000>,
- <0x0 0x1402000 0x0 0x1000>,
+ <0x0 0x1402000 0x0 0x2000>,
<0x0 0x1404000 0x0 0x2000>,
<0x0 0x1406000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
@@ -120,14 +127,14 @@
};
msi1: msi-controller@1570e00 {
- compatible = "fsl,1s1021a-msi";
+ compatible = "fsl,ls1021a-msi";
reg = <0x0 0x1570e00 0x0 0x8>;
msi-controller;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
};
msi2: msi-controller@1570e08 {
- compatible = "fsl,1s1021a-msi";
+ compatible = "fsl,ls1021a-msi";
reg = <0x0 0x1570e08 0x0 0x8>;
msi-controller;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
@@ -137,11 +144,12 @@
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
};
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1021a-dcfg", "syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
@@ -163,7 +171,7 @@
<0x0 0x20220520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
dma-coherent;
status = "disabled";
};
@@ -214,41 +222,10 @@
};
clockgen: clocking@1ee1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x1ee1000 0x10000>;
-
- sysclk: sysclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "sysclk";
- };
-
- cga_pll1: pll@800 {
- compatible = "fsl,qoriq-core-pll-2.0";
- #clock-cells = <1>;
- reg = <0x800 0x10>;
- clocks = <&sysclk>;
- clock-output-names = "cga-pll1", "cga-pll1-div2",
- "cga-pll1-div4";
- };
-
- platform_clk: pll@c00 {
- compatible = "fsl,qoriq-core-pll-2.0";
- #clock-cells = <1>;
- reg = <0xc00 0x10>;
- clocks = <&sysclk>;
- clock-output-names = "platform-clk", "platform-clk-div2";
- };
-
- cluster1_clk: clk0c0@0 {
- compatible = "fsl,qoriq-core-mux-2.0";
- #clock-cells = <0>;
- reg = <0x0 0x10>;
- clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4";
- clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>;
- clock-output-names = "cluster1-clk";
- };
+ compatible = "fsl,ls1021a-clockgen";
+ reg = <0x0 0x1ee1000 0x0 0x1000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
};
dspi0: dspi@2100000 {
@@ -258,7 +235,7 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
spi-num-chipselects = <6>;
big-endian;
status = "disabled";
@@ -271,12 +248,27 @@
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
spi-num-chipselects = <6>;
big-endian;
status = "disabled";
};
+ qspi: quadspi@1550000 {
+ compatible = "fsl,ls1021a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1550000 0x0 0x10000>,
+ <0x0 0x40000000 0x0 0x4000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ amba-base = <0x40000000>;
+ status = "disabled";
+ };
+
i2c0: i2c@2180000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
@@ -284,7 +276,7 @@
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
status = "disabled";
};
@@ -295,7 +287,7 @@
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
status = "disabled";
};
@@ -306,7 +298,7 @@
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
status = "disabled";
};
@@ -399,7 +391,7 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
@@ -408,7 +400,7 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
@@ -417,7 +409,7 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
@@ -426,7 +418,7 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
@@ -435,16 +427,26 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>,
+ <0x0 0x1ee2140 0x0 0x4>;
+ reg-names = "ftm", "FlexTimer1";
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
+ status = "okay";
+ };
+
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>;
+ clocks = <&clockgen 4 1>;
clock-names = "wdog-en";
big-endian;
};
@@ -454,8 +456,8 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b50000 0x0 0x10000>;
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>, <&platform_clk 1>,
- <&platform_clk 1>, <&platform_clk 1>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 47>,
@@ -468,8 +470,8 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b60000 0x0 0x10000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>, <&platform_clk 1>,
- <&platform_clk 1>, <&platform_clk 1>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 45>,
@@ -489,16 +491,31 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
- clocks = <&platform_clk 1>,
- <&platform_clk 1>;
+ clocks = <&clockgen 4 1>,
+ <&clockgen 4 1>;
+ };
+
+ qdma: qdma@8390000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+ <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error", "qdma-queue";
+ channels = <8>;
+ queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
};
dcu: dcu@2ce0000 {
compatible = "fsl,ls1021a-dcu";
reg = <0x0 0x2ce0000 0x0 0x10000>;
interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 0>,
- <&platform_clk 0>;
+ clocks = <&clockgen 4 0>,
+ <&clockgen 4 0>;
clock-names = "dcu", "pix";
big-endian;
status = "disabled";
@@ -626,6 +643,8 @@
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ configure-gfladj;
+ dma-coherent;
snps,dis_rxdet_inp3_quirk;
};
@@ -634,7 +653,9 @@
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
fsl,pcie-scfg = <&scfg 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -643,7 +664,7 @@
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&msi1>;
+ msi-parent = <&msi1>, <&msi2>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -657,7 +678,9 @@
reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
fsl,pcie-scfg = <&scfg 1>;
#address-cells = <3>;
#size-cells = <2>;
@@ -666,7 +689,7 @@
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&msi2>;
+ msi-parent = <&msi1>, <&msi2>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
--- a/arch/arm/boot/dts/mt6580.dtsi
+++ b/arch/arm/boot/dts/mt6580.dtsi
@@ -91,7 +91,7 @@
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0x10211000 0x1000>,
- <0x10212000 0x1000>,
+ <0x10212000 0x2000>,
<0x10214000 0x2000>,
<0x10216000 0x2000>;
};
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -102,7 +102,7 @@
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0x10211000 0x1000>,
- <0x10212000 0x1000>,
+ <0x10212000 0x2000>,
<0x10214000 0x2000>,
<0x10216000 0x2000>;
};
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -129,7 +129,7 @@
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
- <0 0x10212000 0 0x1000>,
+ <0 0x10212000 0 0x2000>,
<0 0x10214000 0 0x2000>,
<0 0x10216000 0 0x2000>;
};
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -221,7 +221,7 @@
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
- <0 0x10212000 0 0x1000>,
+ <0 0x10212000 0 0x2000>,
<0 0x10214000 0 0x2000>,
<0 0x10216000 0 0x2000>;
};
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1109,7 +1109,7 @@
#address-cells = <0>;
reg = <0xffc01000 0x1000>,
- <0xffc02000 0x1000>,
+ <0xffc02000 0x2000>,
<0xffc04000 0x2000>,
<0xffc06000 0x2000>;
interrupts = <GIC_PPI 9 0xf04>;
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -791,7 +791,7 @@
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -1685,9 +1685,9 @@
};
gic: interrupt-controller@01c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -488,7 +488,7 @@
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -613,7 +613,7 @@
gic: interrupt-controller@01c41000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c41000 0x1000>,
- <0x01c42000 0x1000>,
+ <0x01c42000 0x2000>,
<0x01c44000 0x2000>,
<0x01c46000 0x2000>;
interrupt-controller;
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,8 +1,24 @@
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds-sdk.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb-sdk.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb-usdpaa.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds-sdk.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb-sdk.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb-usdpaa.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -0,0 +1,134 @@
+/*
+ * Device Tree file for Freescale LS1012A Freedom Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+ model = "LS1012A Freedom Board";
+ compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
+
+ sys_mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ frame-master;
+ bitclock-master;
+ system-clock-frequency = <25000000>;
+ };
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ codec: sgtl5000@a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ VDDA-supply = <&reg_1p8v>;
+ VDDIO-supply = <&reg_1p8v>;
+ clocks = <&sys_mclk>;
+ };
+};
+
+&qspi {
+ num-cs = <1>;
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&sai2 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -0,0 +1,155 @@
+/*
+ * Device Tree file for Freescale LS1012A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+ model = "LS1012A QDS Board";
+ compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
+
+ sys_mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ frame-master;
+ bitclock-master;
+ system-clock-frequency = <24576000>;
+ };
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ pca9547@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+
+ codec: sgtl5000@a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ VDDA-supply = <&reg_3p3v>;
+ VDDIO-supply = <&reg_3p3v>;
+ clocks = <&sys_mclk>;
+ };
+ };
+ };
+};
+
+&qspi {
+ num-cs = <2>;
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ };
+};
+
+&sai2 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&esdhc0 {
+ status = "okay";
+};
+
+&esdhc1 {
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -0,0 +1,91 @@
+/*
+ * Device Tree file for Freescale LS1012A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+ model = "LS1012A RDB Board";
+ compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&qspi {
+ num-cs = <2>;
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&esdhc0 {
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ status = "okay";
+};
+
+&esdhc1 {
+ mmc-hs200-1_8v;
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -0,0 +1,517 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1012A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ compatible = "fsl,ls1012a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ crypto = &crypto;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ clocks = <&clockgen 1 0>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+ };
+
+ idle-states {
+ /*
+ * PSCI node is not added default, U-boot will add missing
+ * parts if it determines to use PSCI.
+ */
+ entry-method = "arm,psci";
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
+ };
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "sysclk";
+ };
+
+ coreclk: coreclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "coreclk";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+ <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+ <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+ <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gic: interrupt-controller@1400000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+ <0x0 0x1402000 0 0x2000>, /* GICC */
+ <0x0 0x1404000 0 0x2000>, /* GICH */
+ <0x0 0x1406000 0 0x2000>; /* GICV */
+ interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&dcfg>;
+ offset = <0xb0>;
+ mask = <0x02>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ scfg: scfg@1570000 {
+ compatible = "fsl,ls1012a-scfg", "syscon";
+ reg = <0x0 0x1570000 0x0 0x10000>;
+ big-endian;
+ };
+
+ crypto: crypto@1700000 {
+ compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+ "fsl,sec-v4.0";
+ fsl,sec-era = <8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x1700000 0x100000>;
+ reg = <0x00 0x1700000 0x0 0x100000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ rtic@60000 {
+ compatible = "fsl,sec-v5.4-rtic",
+ "fsl,sec-v5.0-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000 0x100 0x60e00 0x18>;
+ ranges = <0x0 0x60100 0x500>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v5.4-rtic-memory",
+ "fsl,sec-v5.0-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x100>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v5.4-rtic-memory",
+ "fsl,sec-v5.0-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x100>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v5.4-rtic-memory",
+ "fsl,sec-v5.0-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x100>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v5.4-rtic-memory",
+ "fsl,sec-v5.0-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x400 0x100>;
+ };
+ };
+ };
+
+ sec_mon: sec_mon@1e90000 {
+ compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
+ "fsl,sec-v4.0-mon";
+ reg = <0x0 0x1e90000 0x0 0x10000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dcfg: dcfg@1ee0000 {
+ compatible = "fsl,ls1012a-dcfg",
+ "syscon";
+ reg = <0x0 0x1ee0000 0x0 0x10000>;
+ big-endian;
+ };
+
+ clockgen: clocking@1ee1000 {
+ compatible = "fsl,ls1012a-clockgen";
+ reg = <0x0 0x1ee1000 0x0 0x1000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk &coreclk>;
+ clock-names = "sysclk", "coreclk";
+ };
+
+ tmu: tmu@1f00000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f00000 0x0 0x10000>;
+ interrupts = <0 33 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-calibration = <0x00000000 0x00000026
+ 0x00000001 0x0000002d
+ 0x00000002 0x00000032
+ 0x00000003 0x00000039
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000046
+ 0x00000006 0x0000004d
+ 0x00000007 0x00000054
+ 0x00000008 0x0000005a
+ 0x00000009 0x00000061
+ 0x0000000a 0x0000006a
+ 0x0000000b 0x00000071
+
+ 0x00010000 0x00000025
+ 0x00010001 0x0000002c
+ 0x00010002 0x00000035
+ 0x00010003 0x0000003d
+ 0x00010004 0x00000045
+ 0x00010005 0x0000004e
+ 0x00010006 0x00000057
+ 0x00010007 0x00000061
+ 0x00010008 0x0000006b
+ 0x00010009 0x00000076
+
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000049
+ 0x00020004 0x00000056
+ 0x00020005 0x00000061
+ 0x00020006 0x0000006d
+
+ 0x00030000 0x00000021
+ 0x00030001 0x0000002a
+ 0x00030002 0x0000003c
+ 0x00030003 0x0000004e>;
+ big-endian;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ esdhc0: esdhc@1560000 {
+ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x1560000 0x0 0x10000>;
+ interrupts = <0 62 0x4>;
+ clocks = <&clockgen 4 0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ big-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc1: esdhc@1580000 {
+ compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x1580000 0x0 0x10000>;
+ interrupts = <0 65 0x4>;
+ clocks = <&clockgen 4 0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ big-endian;
+ broken-cd;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>,
+ <0x0 0x1ee2140 0x0 0x4>;
+ reg-names = "ftm", "FlexTimer1";
+ interrupts = <0 86 0x4>;
+ big-endian;
+ };
+
+ i2c0: i2c@2180000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2180000 0x0 0x10000>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@2190000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2190000 0x0 0x10000>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
+
+ duart0: serial@21c0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x00 0x21c0500 0x0 0x100>;
+ interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
+
+ duart1: serial@21c0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x00 0x21c0600 0x0 0x100>;
+ interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@2300000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@2310000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qspi: quadspi@1550000 {
+ compatible = "fsl,ls1012a-qspi", "fsl,ls1021a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1550000 0x0 0x10000>,
+ <0x0 0x40000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ big-endian;
+ fsl,qspi-has-second-chip;
+ status = "disabled";
+ };
+
+ wdog0: wdog@2ad0000 {
+ compatible = "fsl,ls1012a-wdt",
+ "fsl,imx21-wdt";
+ reg = <0x0 0x2ad0000 0x0 0x10000>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 0>;
+ big-endian;
+ };
+
+ sai1: sai@2b50000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0x2b50000 0x0 0x10000>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>,
+ <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 47>,
+ <&edma0 1 46>;
+ status = "disabled";
+ };
+
+ sai2: sai@2b60000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0x2b60000 0x0 0x10000>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>,
+ <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 45>,
+ <&edma0 1 44>;
+ status = "disabled";
+ };
+
+ edma0: edma@2c00000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x0 0x2c00000 0x0 0x10000>,
+ <0x0 0x2c10000 0x0 0x10000>,
+ <0x0 0x2c20000 0x0 0x10000>;
+ interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
+ <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ big-endian;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clockgen 4 3>,
+ <&clockgen 4 3>;
+ };
+
+ usb0: usb3@2f00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <0 60 0x4>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ usb1: usb2@8600000 {
+ compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+ reg = <0x0 0x8600000 0x0 0x1000>;
+ interrupts = <0 139 0x4>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
+
+ sata: sata@3200000 {
+ compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20140520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 0>;
+ dma-coherent;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -0,0 +1,45 @@
+/*
+ * QorIQ FMan v3 device tree nodes for ls1043
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+
+};
+
+&fman0 {
+ /* these aliases provide the FMan ports mapping */
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@ea000 {
+ };
+
+ enet6: ethernet@f0000 {
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts
@@ -0,0 +1,69 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "fsl-ls1043a-qds.dts"
+
+&bman_fbpr {
+ compatible = "fsl,bman-fbpr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&soc {
+#include "qoriq-dpaa-eth.dtsi"
+#include "qoriq-fman3-0-6oh.dtsi"
+};
+
+&fman0 {
+ compatible = "fsl,fman", "simple-bus";
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*
@@ -45,7 +45,7 @@
*/
/dts-v1/;
-/include/ "fsl-ls1043a.dtsi"
+#include "fsl-ls1043a.dtsi"
/ {
model = "LS1043A QDS Board";
@@ -60,6 +60,22 @@
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
+ sgmii_riser_s1_p1 = &sgmii_phy_s1_p1;
+ sgmii_riser_s2_p1 = &sgmii_phy_s2_p1;
+ sgmii_riser_s3_p1 = &sgmii_phy_s3_p1;
+ sgmii_riser_s4_p1 = &sgmii_phy_s4_p1;
+ qsgmii_s1_p1 = &qsgmii_phy_s1_p1;
+ qsgmii_s1_p2 = &qsgmii_phy_s1_p2;
+ qsgmii_s1_p3 = &qsgmii_phy_s1_p3;
+ qsgmii_s1_p4 = &qsgmii_phy_s1_p4;
+ qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
+ qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
+ qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
+ qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
+ emi1_slot1 = &ls1043mdio_s1;
+ emi1_slot2 = &ls1043mdio_s2;
+ emi1_slot3 = &ls1043mdio_s3;
+ emi1_slot4 = &ls1043mdio_s4;
};
chosen {
@@ -97,8 +113,11 @@
};
fpga: board-control@2,0 {
- compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-bus";
reg = <0x2 0x0 0x0000100>;
+ ranges = <0 2 0 0x100>;
};
};
@@ -181,3 +200,149 @@
reg = <0>;
};
};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+ ethernet@e0000 {
+ phy-handle = <&qsgmii_phy_s2_p1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&qsgmii_phy_s2_p2>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&qsgmii_phy_s2_p3>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&qsgmii_phy_s2_p4>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 { /* DTSEC9/10GEC1 */
+ fixed-link = <1 1 10000 0 0>;
+ phy-connection-type = "xgmii";
+ };
+};
+
+&fpga {
+ mdio-mux-emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1 */
+
+ /* On-board RGMII1 PHY */
+ ls1043mdio0: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+ reg = <0x1>;
+ };
+ };
+
+ /* On-board RGMII2 PHY */
+ ls1043mdio1: mdio@1 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+ reg = <0x2>;
+ };
+ };
+
+ /* Slot 1 */
+ ls1043mdio_s1: mdio@2 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s1_p1: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ qsgmii_phy_s1_p2: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ qsgmii_phy_s1_p3: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+ qsgmii_phy_s1_p4: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+
+ sgmii_phy_s1_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 2 */
+ ls1043mdio_s2: mdio@3 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s2_p1: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+ qsgmii_phy_s2_p2: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+ qsgmii_phy_s2_p3: ethernet-phy@a {
+ reg = <0xa>;
+ };
+ qsgmii_phy_s2_p4: ethernet-phy@b {
+ reg = <0xb>;
+ };
+
+ sgmii_phy_s2_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 3 */
+ ls1043mdio_s3: mdio@4 {
+ reg = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s3_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 4 */
+ ls1043mdio_s4: mdio@5 {
+ reg = <0xa0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s4_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts
@@ -0,0 +1,69 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "fsl-ls1043a-rdb.dts"
+
+&bman_fbpr {
+ compatible = "fsl,bman-fbpr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&soc {
+#include "qoriq-dpaa-eth.dtsi"
+#include "qoriq-fman3-0-6oh.dtsi"
+};
+
+&fman0 {
+ compatible = "fsl,fman", "simple-bus";
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts
@@ -0,0 +1,117 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "fsl-ls1043a-rdb-sdk.dts"
+
+&soc {
+ bp7: buffer-pool@7 {
+ compatible = "fsl,p4080-bpool", "fsl,bpool";
+ fsl,bpid = <7>;
+ fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
+ fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
+ };
+
+ bp8: buffer-pool@8 {
+ compatible = "fsl,p4080-bpool", "fsl,bpool";
+ fsl,bpid = <8>;
+ fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
+ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+ };
+
+ bp9: buffer-pool@9 {
+ compatible = "fsl,p4080-bpool", "fsl,bpool";
+ fsl,bpid = <9>;
+ fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>;
+ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+ };
+
+ fsl,dpaa {
+ compatible = "fsl,ls1043a", "fsl,dpaa", "simple-bus";
+
+ ethernet@0 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x50 1 0x51 1>;
+ fsl,qman-frame-queues-tx = <0x70 1 0x71 1>;
+ };
+
+ ethernet@1 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x52 1 0x53 1>;
+ fsl,qman-frame-queues-tx = <0x72 1 0x73 1>;
+ };
+
+ ethernet@2 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
+ fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
+ };
+
+ ethernet@3 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
+ fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
+ };
+
+ ethernet@4 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x58 1 0x59 1>;
+ fsl,qman-frame-queues-tx = <0x78 1 0x79 1>;
+ };
+
+ ethernet@5 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x60 1 0x61 1>;
+ fsl,qman-frame-queues-tx = <0x80 1 0x81 1>;
+ };
+
+ ethernet@8 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>;
+ fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>;
+
+ };
+ dpa-fman0-oh@2 {
+ compatible = "fsl,dpa-oh";
+ /* Define frame queues for the OH port*/
+ /* <OH Rx error, OH Rx default> */
+ fsl,qman-frame-queues-oh = <0x5a 1 0x5b 1>;
+ fsl,fman-oh-port = <&fman0_oh2>;
+ };
+ };
+};
+/ {
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ usdpaa_mem: usdpaa_mem {
+ compatible = "fsl,usdpaa-mem";
+ alloc-ranges = <0 0 0x10000 0>;
+ size = <0 0x10000000>;
+ alignment = <0 0x10000000>;
+ };
+ };
+};
+
+&fman0 {
+ fman0_oh2: port@83000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*
@@ -45,7 +45,7 @@
*/
/dts-v1/;
-/include/ "fsl-ls1043a.dtsi"
+#include "fsl-ls1043a.dtsi"
/ {
model = "LS1043A RDB Board";
@@ -86,6 +86,10 @@
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
+ rtc@51 {
+ compatible = "nxp,pcf85263";
+ reg = <0x51>;
+ };
};
&ifc {
@@ -130,6 +134,38 @@
reg = <0>;
spi-max-frequency = <1000000>; /* input clock */
};
+
+ slic@2 {
+ compatible = "maxim,ds26522";
+ reg = <2>;
+ spi-max-frequency = <2000000>;
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <50>;
+ };
+
+ slic@3 {
+ compatible = "maxim,ds26522";
+ reg = <3>;
+ spi-max-frequency = <2000000>;
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <50>;
+ };
+};
+
+&uqe {
+ ucc_hdlc: ucc@2000 {
+ compatible = "fsl,ucc-hdlc";
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk9";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot-mask = <0xfffffffe>;
+ fsl,rx-timeslot-mask = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ fsl,tdm-interface;
+ };
};
&duart0 {
@@ -139,3 +175,76 @@
&duart1 {
status = "okay";
};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+ ethernet@e0000 {
+ phy-handle = <&qsgmii_phy1>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&qsgmii_phy2>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii-txid";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii-txid";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&qsgmii_phy3>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&qsgmii_phy4>;
+ phy-connection-type = "qsgmii";
+ };
+
+ ethernet@f0000 { /* 10GEC1 */
+ phy-handle = <&aqr105_phy>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@fc000 {
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ qsgmii_phy1: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+
+ qsgmii_phy2: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+
+ qsgmii_phy3: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+
+ qsgmii_phy4: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+ };
+
+ mdio@fd000 {
+ aqr105_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 132 4>;
+ reg = <0x1>;
+ };
+ };
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -1,7 +1,7 @@
/*
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*
@@ -44,12 +44,25 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/thermal/thermal.h>
+
/ {
compatible = "fsl,ls1043a";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
+ ethernet6 = &enet6;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -66,6 +79,8 @@
reg = <0x0>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu1: cpu@1 {
@@ -74,6 +89,7 @@
reg = <0x1>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu2: cpu@2 {
@@ -82,6 +98,7 @@
reg = <0x2>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu3: cpu@3 {
@@ -90,6 +107,7 @@
reg = <0x3>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
l2: l2-cache {
@@ -97,12 +115,56 @@
};
};
+ idle-states {
+ /*
+ * PSCI node is not added default, U-boot will add missing
+ * parts if it determines to use PSCI.
+ */
+ entry-method = "arm,psci";
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
+ };
+ };
+
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0 0x80000000>;
/* DRAM space 1, size: 2GiB DRAM */
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ bman_fbpr: bman-fbpr {
+ compatible = "shared-dma-pool";
+ size = <0 0x1000000>;
+ alignment = <0 0x1000000>;
+ no-map;
+ };
+
+ qman_fqd: qman-fqd {
+ compatible = "shared-dma-pool";
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ no-map;
+ };
+
+ qman_pfdr: qman-pfdr {
+ compatible = "shared-dma-pool";
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ no-map;
+ };
+ };
+
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -149,7 +211,7 @@
interrupts = <1 9 0xf08>;
};
- soc {
+ soc: soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
@@ -213,13 +275,14 @@
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1043a-dcfg", "syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
+ big-endian;
interrupts = <0 43 0x4>;
};
@@ -255,6 +318,103 @@
big-endian;
};
+ tmu: tmu@1f00000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f00000 0x0 0x10000>;
+ interrupts = <0 33 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-calibration = <0x00000000 0x00000026
+ 0x00000001 0x0000002d
+ 0x00000002 0x00000032
+ 0x00000003 0x00000039
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000046
+ 0x00000006 0x0000004d
+ 0x00000007 0x00000054
+ 0x00000008 0x0000005a
+ 0x00000009 0x00000061
+ 0x0000000a 0x0000006a
+ 0x0000000b 0x00000071
+
+ 0x00010000 0x00000025
+ 0x00010001 0x0000002c
+ 0x00010002 0x00000035
+ 0x00010003 0x0000003d
+ 0x00010004 0x00000045
+ 0x00010005 0x0000004e
+ 0x00010006 0x00000057
+ 0x00010007 0x00000061
+ 0x00010008 0x0000006b
+ 0x00010009 0x00000076
+
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000049
+ 0x00020004 0x00000056
+ 0x00020005 0x00000061
+ 0x00020006 0x0000006d
+
+ 0x00030000 0x00000021
+ 0x00030001 0x0000002a
+ 0x00030002 0x0000003c
+ 0x00030003 0x0000004e>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ qman: qman@1880000 {
+ compatible = "fsl,qman";
+ reg = <0x00 0x1880000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&qman_fqd &qman_pfdr>;
+ };
+
+ bman: bman@1890000 {
+ compatible = "fsl,bman";
+ reg = <0x00 0x1890000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&bman_fbpr>;
+ };
+
+ bportals: bman-portals@508000000 {
+ ranges = <0x0 0x5 0x08000000 0x8000000>;
+ };
+
+ qportals: qman-portals@500000000 {
+ ranges = <0x0 0x5 0x00000000 0x8000000>;
+ };
+
dspi0: dspi@2100000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
@@ -396,6 +556,72 @@
#interrupt-cells = <2>;
};
+ uqe: uqe@2400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe", "simple-bus";
+ ranges = <0x0 0x0 0x2400000 0x40000>;
+ reg = <0x0 0x2400000 0x0 0x480>;
+ brg-frequency = <100000000>;
+ bus-frequency = <200000000>;
+
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: qeic@80 {
+ compatible = "fsl,qe-ic";
+ reg = <0x80 0x80>;
+ #address-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupts = <0 77 0x04 0 77 0x04>;
+ };
+
+ si1: si@700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,ls1043-qe-si",
+ "fsl,t1040-qe-si";
+ reg = <0x700 0x80>;
+ };
+
+ siram1: siram@1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ls1043-qe-siram",
+ "fsl,t1040-qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+ };
+
lpuart0: serial@2950000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
@@ -450,6 +676,16 @@
status = "disabled";
};
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>,
+ <0x0 0x1ee2140 0x0 0x4>;
+ reg-names = "ftm", "FlexTimer1";
+ interrupts = <0 86 0x4>;
+ big-endian;
+ status = "okay";
+ };
+
wdog0: wdog@2ad0000 {
compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
@@ -482,6 +718,8 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ snps,dma-snooping;
};
usb1: usb3@3000000 {
@@ -491,6 +729,9 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ snps,dma-snooping;
+ configure-gfladj;
};
usb2: usb3@3100000 {
@@ -500,32 +741,52 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ snps,dma-snooping;
+ configure-gfladj;
};
sata: sata@3200000 {
compatible = "fsl,ls1043a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>;
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20140520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
interrupts = <0 69 0x4>;
clocks = <&clockgen 4 0>;
dma-coherent;
};
+ qdma: qdma@8380000 {
+ compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
+ reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+ <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+ interrupts = <0 152 0x4>,
+ <0 39 0x4>;
+ interrupt-names = "qdma-error", "qdma-queue";
+ channels = <8>;
+ queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
msi1: msi-controller1@1571000 {
- compatible = "fsl,1s1043a-msi";
+ compatible = "fsl,ls1043a-msi";
reg = <0x0 0x1571000 0x0 0x8>;
msi-controller;
interrupts = <0 116 0x4>;
};
msi2: msi-controller2@1572000 {
- compatible = "fsl,1s1043a-msi";
+ compatible = "fsl,ls1043a-msi";
reg = <0x0 0x1572000 0x0 0x8>;
msi-controller;
interrupts = <0 126 0x4>;
};
msi3: msi-controller3@1573000 {
- compatible = "fsl,1s1043a-msi";
+ compatible = "fsl,ls1043a-msi";
reg = <0x0 0x1573000 0x0 0x8>;
msi-controller;
interrupts = <0 160 0x4>;
@@ -536,9 +797,9 @@
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 118 0x4>, /* controller interrupt */
- <0 117 0x4>; /* PME interrupt */
- interrupt-names = "intr", "pme";
+ interrupts = <0 117 0x4>, /* PME interrupt */
+ <0 118 0x4>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -547,7 +808,7 @@
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&msi1>;
+ msi-parent = <&msi1>, <&msi2>, <&msi3>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
@@ -561,9 +822,9 @@
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 128 0x4>,
- <0 127 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 127 0x4>,
+ <0 128 0x4>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -572,7 +833,7 @@
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&msi2>;
+ msi-parent = <&msi1>, <&msi2>, <&msi3>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 120 0x4>,
@@ -586,9 +847,9 @@
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 162 0x4>,
- <0 161 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 161 0x4>,
+ <0 162 0x4>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -597,7 +858,7 @@
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&msi3>;
+ msi-parent = <&msi1>, <&msi2>, <&msi3>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
@@ -608,3 +869,6 @@
};
};
+
+#include "qoriq-qman1-portals.dtsi"
+#include "qoriq-bman1-portals.dtsi"
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
@@ -0,0 +1,48 @@
+/*
+ * QorIQ FMan v3 device tree nodes for ls1046
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+#include "qoriq-fman3-0-10g-1.dtsi"
+};
+
+&fman0 {
+ /* these aliases provide the FMan ports mapping */
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+
+ enet4: ethernet@e8000 {
+ };
+
+ enet5: ethernet@ea000 {
+ };
+
+ enet6: ethernet@f0000 {
+ };
+
+ enet7: ethernet@f2000 {
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts
@@ -0,0 +1,109 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "fsl-ls1046a-qds.dts"
+
+&bman_fbpr {
+ compatible = "fsl,bman-fbpr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&soc {
+#include "qoriq-dpaa-eth.dtsi"
+#include "qoriq-fman3-0-6oh.dtsi"
+};
+
+&fsldpaa {
+ ethernet@9 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet7>;
+ };
+};
+
+&fman0 {
+ compatible = "fsl,fman", "simple-bus";
+};
+
+&dspi {
+ bus-num = <0>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a11", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+
+ flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sst25wf040b", "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ };
+
+ flash@2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "en25s64", "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ reg = <2>;
+ spi-max-frequency = <10000000>;
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -0,0 +1,363 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * Shaohui Xie <Shaohui.Xie@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+ model = "LS1046A QDS Board";
+ compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ serial0 = &duart0;
+ serial1 = &duart1;
+ serial2 = &duart2;
+ serial3 = &duart3;
+
+ emi1_slot1 = &ls1046mdio_s1;
+ emi1_slot2 = &ls1046mdio_s2;
+ emi1_slot4 = &ls1046mdio_s4;
+
+ sgmii_s1_p1 = &sgmii_phy_s1_p1;
+ sgmii_s1_p2 = &sgmii_phy_s1_p2;
+ sgmii_s1_p3 = &sgmii_phy_s1_p3;
+ sgmii_s1_p4 = &sgmii_phy_s1_p4;
+ sgmii_s4_p1 = &sgmii_phy_s4_p1;
+ qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
+ qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
+ qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
+ qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&dspi {
+ bus-num = <0>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a11", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+
+ flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sst25wf040b", "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ };
+
+ flash@2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "en25s64", "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ reg = <2>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ pca9547@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ /* IRQ10_B */
+ interrupts = <0 150 0x4>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c512";
+ reg = <0x56>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c512";
+ reg = <0x57>;
+ };
+
+ temp-sensor@4c {
+ compatible = "adi,adt7461a";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NOR, NAND Flashes and FPGA on board */
+ ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+ 0x1 0x0 0x0 0x7e800000 0x00010000
+ 0x2 0x0 0x0 0x7fb00000 0x00000100>;
+ status = "okay";
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@1,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+ };
+
+ fpga: board-control@2,0 {
+ compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-bus";
+ reg = <0x2 0x0 0x0000100>;
+ ranges = <0 2 0 0x100>;
+ };
+};
+
+&lpuart0 {
+ status = "okay";
+};
+
+&qspi {
+ num-cs = <2>;
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fl128s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+ ethernet@e0000 {
+ phy-handle = <&qsgmii_phy_s2_p1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&sgmii_phy_s4_p1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&sgmii_phy_s1_p3>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&sgmii_phy_s1_p4>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 { /* DTSEC9/10GEC1 */
+ phy-handle = <&sgmii_phy_s1_p1>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 { /* DTSEC10/10GEC2 */
+ phy-handle = <&sgmii_phy_s1_p2>;
+ phy-connection-type = "xgmii";
+ };
+};
+
+&fpga {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ mdio-mux-emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1 */
+
+ /* On-board RGMII1 PHY */
+ ls1046mdio0: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+ reg = <0x1>;
+ };
+ };
+
+ /* On-board RGMII2 PHY */
+ ls1046mdio1: mdio@1 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+ reg = <0x2>;
+ };
+ };
+
+ /* Slot 1 */
+ ls1046mdio_s1: mdio@2 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s1_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ sgmii_phy_s1_p2: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ sgmii_phy_s1_p3: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ sgmii_phy_s1_p4: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ /* Slot 2 */
+ ls1046mdio_s2: mdio@3 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s2_p1: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+ qsgmii_phy_s2_p2: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+ qsgmii_phy_s2_p3: ethernet-phy@a {
+ reg = <0xa>;
+ };
+ qsgmii_phy_s2_p4: ethernet-phy@b {
+ reg = <0xb>;
+ };
+ };
+
+ /* Slot 4 */
+ ls1046mdio_s4: mdio@5 {
+ reg = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s4_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts
@@ -0,0 +1,76 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "fsl-ls1046a-rdb.dts"
+
+&bman_fbpr {
+ compatible = "fsl,bman-fbpr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+&qman_pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10000 0>;
+};
+
+&soc {
+#include "qoriq-dpaa-eth.dtsi"
+#include "qoriq-fman3-0-6oh.dtsi"
+};
+
+&fsldpaa {
+ ethernet@9 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet7>;
+ };
+};
+
+&fman0 {
+ compatible = "fsl,fman", "simple-bus";
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "fsl-ls1046a-rdb-sdk.dts"
+
+&soc {
+ bp7: buffer-pool@7 {
+ compatible = "fsl,ls1046a-bpool", "fsl,bpool";
+ fsl,bpid = <7>;
+ fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
+ fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
+ };
+
+ bp8: buffer-pool@8 {
+ compatible = "fsl,ls1046a-bpool", "fsl,bpool";
+ fsl,bpid = <8>;
+ fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
+ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+ };
+
+ bp9: buffer-pool@9 {
+ compatible = "fsl,ls1046a-bpool", "fsl,bpool";
+ fsl,bpid = <9>;
+ fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>;
+ fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+ };
+
+ fsl,dpaa {
+ compatible = "fsl,ls1046a", "fsl,dpaa", "simple-bus";
+
+ ethernet@2 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
+ fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
+ };
+
+ ethernet@3 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
+ fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
+ };
+
+ ethernet@4 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x58 1 0x59 1>;
+ fsl,qman-frame-queues-tx = <0x78 1 0x79 1>;
+ };
+
+ ethernet@5 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x5a 1 0x5b 1>;
+ fsl,qman-frame-queues-tx = <0x7a 1 0x7b 1>;
+ };
+
+ ethernet@8 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>;
+ fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>;
+ };
+
+ ethernet@9 {
+ compatible = "fsl,dpa-ethernet-init";
+ fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+ fsl,qman-frame-queues-rx = <0x5e 1 0x5f 1>;
+ fsl,qman-frame-queues-tx = <0x7e 1 0x7f 1>;
+ };
+
+ dpa-fman0-oh@2 {
+ compatible = "fsl,dpa-oh";
+ /* Define frame queues for the OH port*/
+ /* <OH Rx error, OH Rx default> */
+ fsl,qman-frame-queues-oh = <0x60 1 0x61 1>;
+ fsl,fman-oh-port = <&fman0_oh2>;
+ };
+ };
+};
+/ {
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ usdpaa_mem: usdpaa_mem {
+ compatible = "fsl,usdpaa-mem";
+ alloc-ranges = <0 0 0x10000 0>;
+ size = <0 0x10000000>;
+ alignment = <0 0x10000000>;
+ };
+ };
+};
+
+&fman0 {
+ fman0_oh2: port@83000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -0,0 +1,218 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+ model = "LS1046A RDB Board";
+ compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
+
+ aliases {
+ serial0 = &duart0;
+ serial1 = &duart1;
+ serial2 = &duart2;
+ serial3 = &duart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&esdhc {
+ mmc-hs200-1_8v;
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ temp-sensor@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c512";
+ reg = <0x52>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c512";
+ reg = <0x53>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+};
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NAND Flashe and CPLD on board */
+ ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
+ 0x2 0x0 0x0 0x7fb00000 0x00000100>;
+ status = "okay";
+
+ nand@0,0 {
+ compatible = "fsl,ifc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x0 0x10000>;
+ };
+
+ cpld: board-control@2,0 {
+ compatible = "fsl,ls1046ardb-cpld";
+ reg = <0x2 0x0 0x0000100>;
+ };
+};
+
+&qspi {
+ num-cs = <2>;
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+
+ qflash1: s25fs512s@1 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+ };
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&sgmii_phy1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&sgmii_phy2>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 { /* 10GEC1 */
+ phy-handle = <&aqr106_phy>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 { /* 10GEC2 */
+ fixed-link = <0 1 1000 0 0>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@fc000 {
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ sgmii_phy1: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+
+ sgmii_phy2: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ };
+
+ mdio@fd000 {
+ aqr106_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 131 4>;
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -0,0 +1,793 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ compatible = "fsl,ls1046a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ crypto = &crypto;
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ ethernet4 = &enet4;
+ ethernet5 = &enet5;
+ ethernet6 = &enet6;
+ ethernet7 = &enet7;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x0>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x1>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x2>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x3>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ idle-states {
+ /*
+ * PSCI node is not added default, U-boot will add missing
+ * parts if it determines to use PSCI.
+ */
+ entry-method = "arm,psci";
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+ };
+
+ reboot {
+ compatible ="syscon-reboot";
+ regmap = <&dcfg>;
+ offset = <0xb0>;
+ mask = <0x02>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xf) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xf) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xf) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a72-pmu";
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ gic: interrupt-controller@1400000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x1410000 0 0x10000>, /* GICD */
+ <0x0 0x1420000 0 0x20000>, /* GICC */
+ <0x0 0x1440000 0 0x20000>, /* GICH */
+ <0x0 0x1460000 0 0x20000>; /* GICV */
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ddr: memory-controller@1080000 {
+ compatible = "fsl,qoriq-memory-controller";
+ reg = <0x0 0x1080000 0x0 0x1000>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
+ };
+
+ ifc: ifc@1530000 {
+ compatible = "fsl,ifc", "simple-bus";
+ reg = <0x0 0x1530000 0x0 0x10000>;
+ big-endian;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ qspi: quadspi@1550000 {
+ compatible = "fsl,ls1021a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1550000 0x0 0x10000>,
+ <0x0 0x40000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ fsl,qspi-has-second-chip;
+ status = "disabled";
+ };
+
+ esdhc: esdhc@1560000 {
+ compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x1560000 0x0 0x10000>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 2 1>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ big-endian;
+ bus-width = <4>;
+ };
+
+ scfg: scfg@1570000 {
+ compatible = "fsl,ls1046a-scfg", "syscon";
+ reg = <0x0 0x1570000 0x0 0x10000>;
+ big-endian;
+ };
+
+ crypto: crypto@1700000 {
+ compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+ "fsl,sec-v4.0";
+ fsl,sec-era = <8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x1700000 0x100000>;
+ reg = <0x00 0x1700000 0x0 0x100000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ qman: qman@1880000 {
+ compatible = "fsl,qman";
+ reg = <0x00 0x1880000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&qman_fqd &qman_pfdr>;
+
+ };
+
+ bman: bman@1890000 {
+ compatible = "fsl,bman";
+ reg = <0x00 0x1890000 0x0 0x10000>;
+ interrupts = <0 45 0x4>;
+ memory-region = <&bman_fbpr>;
+
+ };
+
+ qportals: qman-portals@500000000 {
+ ranges = <0x0 0x5 0x00000000 0x8000000>;
+ };
+
+ bportals: bman-portals@508000000 {
+ ranges = <0x0 0x5 0x08000000 0x8000000>;
+ };
+
+ dcfg: dcfg@1ee0000 {
+ compatible = "fsl,ls1046a-dcfg", "syscon";
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
+ big-endian;
+ };
+
+ clockgen: clocking@1ee1000 {
+ compatible = "fsl,ls1046a-clockgen";
+ reg = <0x0 0x1ee1000 0x0 0x1000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
+ };
+
+ tmu: tmu@1f00000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f00000 0x0 0x10000>;
+ interrupts = <0 33 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-calibration =
+ /* Calibration data group 1 */
+ <0x00000000 0x00000026
+ 0x00000001 0x0000002d
+ 0x00000002 0x00000032
+ 0x00000003 0x00000039
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000046
+ 0x00000006 0x0000004d
+ 0x00000007 0x00000054
+ 0x00000008 0x0000005a
+ 0x00000009 0x00000061
+ 0x0000000a 0x0000006a
+ 0x0000000b 0x00000071
+ /* Calibration data group 2 */
+ 0x00010000 0x00000025
+ 0x00010001 0x0000002c
+ 0x00010002 0x00000035
+ 0x00010003 0x0000003d
+ 0x00010004 0x00000045
+ 0x00010005 0x0000004e
+ 0x00010006 0x00000057
+ 0x00010007 0x00000061
+ 0x00010008 0x0000006b
+ 0x00010009 0x00000076
+ /* Calibration data group 3 */
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000049
+ 0x00020004 0x00000056
+ 0x00020005 0x00000061
+ 0x00020006 0x0000006d
+ /* Calibration data group 4 */
+ 0x00030000 0x00000021
+ 0x00030001 0x0000002a
+ 0x00030002 0x0000003c
+ 0x00030003 0x0000004e>;
+ big-endian;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ dspi: dspi@2100000 {
+ compatible = "fsl,ls1021a-v1.0-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dspi";
+ clocks = <&clockgen 4 1>;
+ spi-num-chipselects = <5>;
+ big-endian;
+ status = "disabled";
+ };
+
+ i2c0: i2c@2180000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2180000 0x0 0x10000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ dmas = <&edma0 1 39>,
+ <&edma0 1 38>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2c1: i2c@2190000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2190000 0x0 0x10000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@21a0000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x21a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@21b0000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x21b0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ duart0: serial@21c0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x00 0x21c0500 0x0 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ };
+
+ duart1: serial@21c0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x00 0x21c0600 0x0 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ };
+
+ duart2: serial@21d0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21d0500 0x0 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ };
+
+ duart3: serial@21d0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21d0600 0x0 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ };
+
+ gpio0: gpio@2300000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@2310000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2320000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@2330000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ lpuart0: serial@2950000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2950000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 0>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart1: serial@2960000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2960000 0x0 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart2: serial@2970000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2970000 0x0 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart3: serial@2980000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2980000 0x0 0x1000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart4: serial@2990000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2990000 0x0 0x1000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart5: serial@29a0000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x29a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>,
+ <0x0 0x1ee2140 0x0 0x4>;
+ reg-names = "ftm", "FlexTimer1";
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
+ };
+
+ wdog0: watchdog@2ad0000 {
+ compatible = "fsl,imx21-wdt";
+ reg = <0x0 0x2ad0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ big-endian;
+ };
+
+ edma0: edma@2c00000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x0 0x2c00000 0x0 0x10000>,
+ <0x0 0x2c10000 0x0 0x10000>,
+ <0x0 0x2c20000 0x0 0x10000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ big-endian;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clockgen 4 1>,
+ <&clockgen 4 1>;
+ };
+
+ usb0: usb@2f00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ usb1: usb@3000000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3000000 0x0 0x10000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ usb2: usb@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ sata: sata@3200000 {
+ compatible = "fsl,ls1046a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20140520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ dma-coherent;
+ };
+
+ qdma: qdma@8380000 {
+ compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
+ reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+ <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+ interrupts = <0 153 0x4>,
+ <0 39 0x4>;
+ interrupt-names = "qdma-error", "qdma-queue";
+ channels = <8>;
+ queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
+ msi1: msi-controller@1580000 {
+ compatible = "fsl,ls1046a-msi";
+ msi-controller;
+ reg = <0x0 0x1580000 0x0 0x10000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ msi2: msi-controller@1590000 {
+ compatible = "fsl,ls1046a-msi";
+ msi-controller;
+ reg = <0x0 0x1590000 0x0 0x10000>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ msi3: msi-controller@15a0000 {
+ compatible = "fsl,ls1046a-msi";
+ msi-controller;
+ reg = <0x0 0x15a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3400000 {
+ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&msi1>, <&msi2>, <&msi3>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3500000 {
+ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <2>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&msi1>, <&msi2>, <&msi3>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3600000 {
+ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pme", "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <2>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&msi1>, <&msi2>, <&msi3>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ bman_fbpr: bman-fbpr {
+ compatible = "shared-dma-pool";
+ size = <0 0x1000000>;
+ alignment = <0 0x1000000>;
+ no-map;
+ };
+ qman_fqd: qman-fqd {
+ compatible = "shared-dma-pool";
+ size = <0 0x800000>;
+ alignment = <0 0x800000>;
+ no-map;
+ };
+ qman_pfdr: qman-pfdr {
+ compatible = "shared-dma-pool";
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ no-map;
+ };
+ };
+};
+
+#include "qoriq-qman1-portals.dtsi"
+#include "qoriq-bman1-portals.dtsi"
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -0,0 +1,173 @@
+/*
+ * Device Tree file for NXP LS1088A QDS Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+ model = "LS1088A QDS Board";
+ compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-switch@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ temp-sensor@4c {
+ compatible = "adi,adt7461a";
+ reg = <0x4c>;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ /* IRQ10_B */
+ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c512";
+ reg = <0x56>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c512";
+ reg = <0x57>;
+ };
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ };
+
+ qflash1: s25fs512s@1 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <1>;
+ };
+};
+
+&ifc {
+ status = "okay";
+
+ ranges = <0 0 0x5 0x80000000 0x08000000
+ 2 0 0x5 0x30000000 0x00010000
+ 3 0 0x5 0x20000000 0x00010000>;
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ fpga: board-control@3,0 {
+ compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
+ reg = <0x3 0x0 0x0000100>;
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -0,0 +1,236 @@
+/*
+ * Device Tree file for NXP LS1088A RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+ model = "L1088A RDB Board";
+ compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-switch@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ temp-sensor@4c {
+ compatible = "adi,adt7461a";
+ reg = <0x4c>;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ /* IRQ10_B */
+ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+
+ qflash1: s25fs512s@1 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+ };
+};
+
+&ifc {
+ status = "okay";
+
+ ranges = <0 0 0x5 0x30000000 0x00010000
+ 2 0 0x5 0x20000000 0x00010000>;
+
+ nand@0,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x0 0x0 0x10000>;
+ };
+
+ fpga: board-control@2,0 {
+ compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
+ reg = <0x2 0x0 0x0000100>;
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&emdio1 {
+ /* Freescale F104 PHY1 */
+ mdio1_phy1: emdio1_phy@1 {
+ reg = <0x1c>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy2: emdio1_phy@2 {
+ reg = <0x1d>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy3: emdio1_phy@3 {
+ reg = <0x1e>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy4: emdio1_phy@4 {
+ reg = <0x1f>;
+ phy-connection-type = "qsgmii";
+ };
+ /* F104 PHY2 */
+ mdio1_phy5: emdio1_phy@5 {
+ reg = <0x0c>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy6: emdio1_phy@6 {
+ reg = <0x0d>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy7: emdio1_phy@7 {
+ reg = <0x0e>;
+ phy-connection-type = "qsgmii";
+ };
+ mdio1_phy8: emdio1_phy@8 {
+ reg = <0x0f>;
+ phy-connection-type = "qsgmii";
+ };
+};
+
+&emdio2 {
+ /* Aquantia AQR105 10G PHY */
+ mdio2_phy1: emdio2_phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 2 0x4>;
+ reg = <0x0>;
+ phy-connection-type = "xfi";
+ };
+};
+
+/* DPMAC connections to external PHYs
+ * based on LS1088A RM RevC - $24.1.2 SerDes Options
+ */
+/* DPMAC1 is 10G SFP+, fixed link */
+&dpmac2 {
+ phy-handle = <&mdio2_phy1>;
+};
+&dpmac3 {
+ phy-handle = <&mdio1_phy5>;
+};
+&dpmac4 {
+ phy-handle = <&mdio1_phy6>;
+};
+&dpmac5 {
+ phy-handle = <&mdio1_phy7>;
+};
+&dpmac6 {
+ phy-handle = <&mdio1_phy8>;
+};
+&dpmac7 {
+ phy-handle = <&mdio1_phy1>;
+};
+&dpmac8 {
+ phy-handle = <&mdio1_phy2>;
+};
+&dpmac9 {
+ phy-handle = <&mdio1_phy3>;
+};
+&dpmac10 {
+ phy-handle = <&mdio1_phy4>;
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -0,0 +1,816 @@
+/*
+ * Device Tree Include file for NXP Layerscape-1088A family SoC.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ compatible = "fsl,ls1088a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ crypto = &crypto;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* We have 2 clusters having 4 Cortex-A53 cores each */
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ clocks = <&clockgen 1 0>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x100>;
+ clocks = <&clockgen 1 1>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x101>;
+ clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x102>;
+ clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x103>;
+ clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+ };
+
+ idle-states {
+ /*
+ * PSCI node is not added default, U-boot will add missing
+ * parts if it determines to use PSCI.
+ */
+ entry-method = "arm,psci";
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
+ };
+ };
+
+ gic: interrupt-controller@6000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/
+ <0x0 0x0c0c0000 0 0x2000>, /* GICC */
+ <0x0 0x0c0d0000 0 0x1000>, /* GICH */
+ <0x0 0x0c0e0000 0 0x20000>; /* GICV */
+ interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ its: gic-its@6020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x6020000 0 0x20000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+ <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+ <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+ <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+ };
+
+ fsl_mc: fsl-mc@80c000000 {
+ compatible = "fsl,qoriq-mc";
+ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
+ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */
+ #address-cells = <3>;
+ #size-cells = <1>;
+
+ /*
+ * Region type 0x0 - MC portals
+ * Region type 0x1 - QBMAN portals
+ */
+ ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+ 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+ dpmacs {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpmac1: dpmac@1 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <1>;
+ };
+ dpmac2: dpmac@2 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <2>;
+ };
+ dpmac3: dpmac@3 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <3>;
+ };
+ dpmac4: dpmac@4 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <4>;
+ };
+ dpmac5: dpmac@5 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <5>;
+ };
+ dpmac6: dpmac@6 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <6>;
+ };
+ dpmac7: dpmac@7 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <7>;
+ };
+ dpmac8: dpmac@8 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <8>;
+ };
+ dpmac9: dpmac@9 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <9>;
+ };
+ dpmac10: dpmac@10 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xa>;
+ };
+ };
+
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+ };
+
+ dcfg: dcfg@1e00000 {
+ compatible = "fsl,ls1088a-dcfg", "syscon";
+ reg = <0x0 0x1e00000 0x0 0x10000>;
+ little-endian;
+ };
+
+ rstcr: syscon@1e60000 {
+ compatible = "fsl,ls1088a-rstcr", "syscon";
+ reg = <0x0 0x1e60000 0x0 0x4>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&rstcr>;
+ offset = <0x0>;
+ mask = <0x02>;
+ };
+
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clockgen: clocking@1300000 {
+ compatible = "fsl,ls1088a-clockgen";
+ reg = <0 0x1300000 0 0xa0000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
+ };
+
+ tmu: tmu@1f80000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f80000 0x0 0x10000>;
+ interrupts = <0 23 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-calibration =
+ /* Calibration data group 1 */
+ <0x00000000 0x00000026
+ 0x00000001 0x0000002d
+ 0x00000002 0x00000032
+ 0x00000003 0x00000039
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000046
+ 0x00000006 0x0000004d
+ 0x00000007 0x00000054
+ 0x00000008 0x0000005a
+ 0x00000009 0x00000061
+ 0x0000000a 0x0000006a
+ 0x0000000b 0x00000071
+ /* Calibration data group 2 */
+ 0x00010000 0x00000025
+ 0x00010001 0x0000002c
+ 0x00010002 0x00000035
+ 0x00010003 0x0000003d
+ 0x00010004 0x00000045
+ 0x00010005 0x0000004e
+ 0x00010006 0x00000057
+ 0x00010007 0x00000061
+ 0x00010008 0x0000006b
+ 0x00010009 0x00000076
+ /* Calibration data group 3 */
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000049
+ 0x00020004 0x00000056
+ 0x00020005 0x00000061
+ 0x00020006 0x0000006d
+ /* Calibration data group 4 */
+ 0x00030000 0x00000021
+ 0x00030001 0x0000002a
+ 0x00030002 0x0000003c
+ 0x00030003 0x0000004e>;
+ little-endian;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu4 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ duart0: serial@21c0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ duart1: serial@21c0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0600 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ cluster1_core0_watchdog: wdt@c000000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc000000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core1_watchdog: wdt@c010000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc010000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core2_watchdog: wdt@c020000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc020000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core3_watchdog: wdt@c030000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc030000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core0_watchdog: wdt@c100000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc100000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core1_watchdog: wdt@c110000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc110000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core2_watchdog: wdt@c120000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc120000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core3_watchdog: wdt@c130000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc130000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ gpio0: gpio@2300000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@2310000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2320000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@2330000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* TODO: WRIOP (CCSR?) */
+ emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000,
+ * E-MDIO1: 0x1_6000
+ */
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8B96000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian; /* force the driver in LE mode */
+
+ /* Not necessary on the QDS, but needed on the RDB */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000,
+ * E-MDIO2: 0x1_7000
+ */
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8B97000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian; /* force the driver in LE mode */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ifc: ifc@2240000 {
+ compatible = "fsl,ifc", "simple-bus";
+ reg = <0x0 0x2240000 0x0 0x20000>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ };
+
+ ftm0: ftm0@2800000 {
+ compatible = "fsl,ftm-alarm";
+ reg = <0x0 0x2800000 0x0 0x10000>;
+ interrupts = <0 44 4>;
+ };
+
+ i2c0: i2c@2000000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@2010000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2010000 0x0 0x10000>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@2020000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2020000 0x0 0x10000>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@2030000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2030000 0x0 0x10000>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ status = "disabled";
+ };
+
+ qspi: quadspi@20c0000 {
+ compatible = "fsl,ls2080a-qspi", "fsl,ls1088a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 25 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "qspi_en", "qspi";
+ fsl,qspi-has-second-chip;
+ };
+
+ esdhc: esdhc@2140000 {
+ compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ clock-frequency = <0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ little-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usb0: usb3@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 0x4>; /* Level high type */
+ dr_mode = "host";
+ configure-gfladj;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ usb1: usb3@3110000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 0x4>; /* Level high type */
+ dr_mode = "host";
+ configure-gfladj;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ sata: sata@3200000 {
+ compatible = "fsl,ls1088a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x7 0x100520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ pcie@3400000 {
+ compatible = "fsl,ls2088a-pcie", "fsl,ls1088a-pcie",
+ "snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3500000 {
+ compatible = "fsl,ls2088a-pcie", "fsl,ls1088a-pcie",
+ "snps,dw-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3600000 {
+ compatible = "fsl,ls2088a-pcie", "fsl,ls1088a-pcie",
+ "snps,dw-pcie";
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <8>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ smmu: iommu@5000000 {
+ compatible = "arm,mmu-500";
+ reg = <0 0x5000000 0 0x800000>;
+ #global-interrupts = <12>;
+ #iommu-cells = <1>;
+ stream-match-mask = <0x7C00>;
+ interrupts = <0 13 4>, /* global secure fault */
+ <0 14 4>, /* combined secure interrupt */
+ <0 15 4>, /* global non-secure fault */
+ <0 16 4>, /* combined non-secure interrupt */
+ /* performance counter interrupts 0-7 */
+ <0 211 4>,
+ <0 212 4>,
+ <0 213 4>,
+ <0 214 4>,
+ <0 215 4>,
+ <0 216 4>,
+ <0 217 4>,
+ <0 218 4>,
+ /* per context interrupt, 64 interrupts */
+ <0 146 4>,
+ <0 147 4>,
+ <0 148 4>,
+ <0 149 4>,
+ <0 150 4>,
+ <0 151 4>,
+ <0 152 4>,
+ <0 153 4>,
+ <0 154 4>,
+ <0 155 4>,
+ <0 156 4>,
+ <0 157 4>,
+ <0 158 4>,
+ <0 159 4>,
+ <0 160 4>,
+ <0 161 4>,
+ <0 162 4>,
+ <0 163 4>,
+ <0 164 4>,
+ <0 165 4>,
+ <0 166 4>,
+ <0 167 4>,
+ <0 168 4>,
+ <0 169 4>,
+ <0 170 4>,
+ <0 171 4>,
+ <0 172 4>,
+ <0 173 4>,
+ <0 174 4>,
+ <0 175 4>,
+ <0 176 4>,
+ <0 177 4>,
+ <0 178 4>,
+ <0 179 4>,
+ <0 180 4>,
+ <0 181 4>,
+ <0 182 4>,
+ <0 183 4>,
+ <0 184 4>,
+ <0 185 4>,
+ <0 186 4>,
+ <0 187 4>,
+ <0 188 4>,
+ <0 189 4>,
+ <0 190 4>,
+ <0 191 4>,
+ <0 192 4>,
+ <0 193 4>,
+ <0 194 4>,
+ <0 195 4>,
+ <0 196 4>,
+ <0 197 4>,
+ <0 198 4>,
+ <0 199 4>,
+ <0 200 4>,
+ <0 201 4>,
+ <0 202 4>,
+ <0 203 4>,
+ <0 204 4>,
+ <0 205 4>,
+ <0 206 4>,
+ <0 207 4>,
+ <0 208 4>,
+ <0 209 4>;
+ };
+
+ crypto: crypto@8000000 {
+ compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+ fsl,sec-era = <8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x8000000 0x100000>;
+ reg = <0x00 0x8000000 0x0 0x100000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -1,8 +1,10 @@
/*
* Device Tree file for Freescale LS2080a QDS Board.
*
- * Copyright (C) 2015, Freescale Semiconductor
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
* This file is dual-licensed: you can use it either under the terms
@@ -46,169 +48,76 @@
/dts-v1/;
-/include/ "fsl-ls2080a.dtsi"
+#include "fsl-ls2080a.dtsi"
+#include "fsl-ls208xa-qds.dtsi"
/ {
model = "Freescale Layerscape 2080a QDS Board";
compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
};
-&esdhc {
- status = "okay";
-};
-
&ifc {
- status = "okay";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x5 0x80000000 0x08000000
- 0x2 0x0 0x5 0x30000000 0x00010000
- 0x3 0x0 0x5 0x20000000 0x00010000>;
-
- nor@0,0 {
+ boardctrl: board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
- };
+ compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
+ reg = <3 0 0x300>; /* TODO check address */
+ ranges = <0 3 0 0x300>;
- nand@2,0 {
- compatible = "fsl,ifc-nand";
- reg = <0x2 0x0 0x10000>;
- };
+ mdio_mux_emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&emdio1>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1_MDIO */
- cpld@3,0 {
- reg = <0x3 0x0 0x10000>;
- compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
- };
-};
-
-&i2c0 {
- status = "okay";
- pca9547@77 {
- compatible = "nxp,pca9547";
- reg = <0x77>;
- #address-cells = <1>;
- #size-cells = <0>;
- i2c@0 {
- #address-cells = <1>;
+ #address-cells=<1>;
#size-cells = <0>;
- reg = <0x00>;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- };
- };
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x02>;
-
- ina220@40 {
- compatible = "ti,ina220";
- reg = <0x40>;
- shunt-resistor = <500>;
- };
-
- ina220@41 {
- compatible = "ti,ina220";
- reg = <0x41>;
- shunt-resistor = <1000>;
- };
- };
-
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x3>;
-
- adt7481@4c {
- compatible = "adi,adt7461";
- reg = <0x4c>;
+ /* Child MDIO buses, one for each riser card:
+ * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
+ * VSC8234 PHYs on the riser cards.
+ */
+
+ mdio_mux3: mdio@60 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio0_phy12: mdio_phy0@1c {
+ reg = <0x1c>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy13: mdio_phy1@1d {
+ reg = <0x1d>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy14: mdio_phy2@1e {
+ reg = <0x1e>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy15: mdio_phy3@1f {
+ reg = <0x1f>;
+ phy-connection-type = "sgmii";
+ };
};
};
};
};
-&i2c1 {
- status = "disabled";
-};
-
-&i2c2 {
- status = "disabled";
-};
-
-&i2c3 {
- status = "disabled";
-};
-
-&dspi {
- status = "okay";
- dflash0: n25q128a {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <3000000>;
- reg = <0>;
- };
- dflash1: sst25wf040b {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <3000000>;
- reg = <1>;
- };
- dflash2: en25s64 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <3000000>;
- reg = <2>;
- };
-};
-
-&qspi {
- status = "okay";
- flash0: s25fl256s1@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
- flash2: s25fl256s1@2 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
-};
-
-&sata0 {
- status = "okay";
+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
+&dpmac9 {
+ phy-handle = <&mdio0_phy12>;
};
-
-&sata1 {
- status = "okay";
+&dpmac10 {
+ phy-handle = <&mdio0_phy13>;
};
-
-&usb0 {
- status = "okay";
+&dpmac11 {
+ phy-handle = <&mdio0_phy14>;
};
-
-&usb1 {
- status = "okay";
+&dpmac12 {
+ phy-handle = <&mdio0_phy15>;
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -1,8 +1,10 @@
/*
* Device Tree file for Freescale LS2080a RDB Board.
*
- * Copyright (C) 2015, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
*
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
* This file is dual-licensed: you can use it either under the terms
@@ -46,125 +48,94 @@
/dts-v1/;
-/include/ "fsl-ls2080a.dtsi"
+#include "fsl-ls2080a.dtsi"
+#include "fsl-ls208xa-rdb.dtsi"
/ {
model = "Freescale Layerscape 2080a RDB Board";
compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- };
-
chosen {
stdout-path = "serial1:115200n8";
};
};
-&esdhc {
- status = "okay";
-};
-
-&ifc {
- status = "okay";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x5 0x80000000 0x08000000
- 0x2 0x0 0x5 0x30000000 0x00010000
- 0x3 0x0 0x5 0x20000000 0x00010000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
- };
-
- nand@2,0 {
- compatible = "fsl,ifc-nand";
- reg = <0x2 0x0 0x10000>;
- };
-
- cpld@3,0 {
- reg = <0x3 0x0 0x10000>;
- compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
- };
-
-};
-
-&i2c0 {
- status = "okay";
- pca9547@75 {
- compatible = "nxp,pca9547";
- reg = <0x75>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x01>;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- };
- };
-
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x3>;
-
- adt7481@4c {
- compatible = "adi,adt7461";
- reg = <0x4c>;
- };
- };
- };
-};
-
-&i2c1 {
- status = "disabled";
-};
-
-&i2c2 {
- status = "disabled";
-};
-
-&i2c3 {
+&emdio1 {
status = "disabled";
+ /* CS4340 PHYs */
+ mdio1_phy1: emdio1_phy@1 {
+ reg = <0x10>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy2: emdio1_phy@2 {
+ reg = <0x11>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy3: emdio1_phy@3 {
+ reg = <0x12>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy4: emdio1_phy@4 {
+ reg = <0x13>;
+ phy-connection-type = "xfi";
+ };
};
-&dspi {
- status = "okay";
- dflash0: n25q512a {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p80";
- spi-max-frequency = <3000000>;
- reg = <0>;
+&emdio2 {
+ /* AQR405 PHYs */
+ mdio2_phy1: emdio2_phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 1 0x4>; /* Level high type */
+ reg = <0x0>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy2: emdio2_phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 2 0x4>; /* Level high type */
+ reg = <0x1>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy3: emdio2_phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 4 0x4>; /* Level high type */
+ reg = <0x2>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy4: emdio2_phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 5 0x4>; /* Level high type */
+ reg = <0x3>;
+ phy-connection-type = "xfi";
};
};
-&qspi {
- status = "disabled";
-};
+/* Update DPMAC connections to external PHYs, under the assumption of
+ * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
+ */
+/* Leave Cortina nodes commented out until driver is integrated
+ *&dpmac1 {
+ * phy-handle = <&mdio1_phy1>;
+ *};
+ *&dpmac2 {
+ * phy-handle = <&mdio1_phy2>;
+ *};
+ *&dpmac3 {
+ * phy-handle = <&mdio1_phy3>;
+ *};
+ *&dpmac4 {
+ * phy-handle = <&mdio1_phy4>;
+ *};
+ */
-&sata0 {
- status = "okay";
+&dpmac5 {
+ phy-handle = <&mdio2_phy1>;
};
-
-&sata1 {
- status = "okay";
+&dpmac6 {
+ phy-handle = <&mdio2_phy2>;
};
-
-&usb0 {
- status = "okay";
+&dpmac7 {
+ phy-handle = <&mdio2_phy3>;
};
-
-&usb1 {
- status = "okay";
+&dpmac8 {
+ phy-handle = <&mdio2_phy4>;
};
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -1,7 +1,7 @@
/*
* Device Tree file for Freescale LS2080a software Simulator model
*
- * Copyright (C) 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
@@ -46,17 +46,12 @@
/dts-v1/;
-/include/ "fsl-ls2080a.dtsi"
+#include "fsl-ls2080a.dtsi"
/ {
model = "Freescale Layerscape 2080a software Simulator model";
compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- };
-
ethernet@2210000 {
compatible = "smsc,lan91c111";
reg = <0x0 0x2210000 0x0 0x100>;
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -1,8 +1,9 @@
/*
* Device Tree Include file for Freescale Layerscape-2080A family SoC.
*
- * Copyright (C) 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2016 Freescale Semiconductor, Inc.
*
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
* Bhupesh Sharma <bhupesh.sharma@freescale.com>
*
* This file is dual-licensed: you can use it either under the terms
@@ -44,696 +45,132 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/ {
- compatible = "fsl,ls2080a";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /*
- * We expect the enable-method for cpu's to be "psci", but this
- * is dependent on the SoC FW, which will fill this in.
- *
- * Currently supported enable-method is psci v0.2
- */
-
- /* We have 4 clusters having 2 Cortex-A57 cores each */
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0>;
- clocks = <&clockgen 1 0>;
- next-level-cache = <&cluster0_l2>;
- };
-
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x1>;
- clocks = <&clockgen 1 0>;
- next-level-cache = <&cluster0_l2>;
- };
-
- cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x100>;
- clocks = <&clockgen 1 1>;
- next-level-cache = <&cluster1_l2>;
- };
-
- cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x101>;
- clocks = <&clockgen 1 1>;
- next-level-cache = <&cluster1_l2>;
- };
-
- cpu@200 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x200>;
- clocks = <&clockgen 1 2>;
- next-level-cache = <&cluster2_l2>;
- };
-
- cpu@201 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x201>;
- clocks = <&clockgen 1 2>;
- next-level-cache = <&cluster2_l2>;
- };
-
- cpu@300 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x300>;
- clocks = <&clockgen 1 3>;
- next-level-cache = <&cluster3_l2>;
- };
-
- cpu@301 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x301>;
- clocks = <&clockgen 1 3>;
- next-level-cache = <&cluster3_l2>;
- };
-
- cluster0_l2: l2-cache0 {
- compatible = "cache";
- };
-
- cluster1_l2: l2-cache1 {
- compatible = "cache";
- };
-
- cluster2_l2: l2-cache2 {
- compatible = "cache";
- };
-
- cluster3_l2: l2-cache3 {
- compatible = "cache";
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x00000000 0x80000000 0 0x80000000>;
- /* DRAM space - 1, size : 2 GB DRAM */
- };
-
- sysclk: sysclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <100000000>;
- clock-output-names = "sysclk";
- };
-
- gic: interrupt-controller@6000000 {
- compatible = "arm,gic-v3";
- reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
- <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
- <0x0 0x0c0c0000 0 0x2000>, /* GICC */
- <0x0 0x0c0d0000 0 0x1000>, /* GICH */
- <0x0 0x0c0e0000 0 0x20000>; /* GICV */
- #interrupt-cells = <3>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- interrupt-controller;
- interrupts = <1 9 0x4>;
-
- its: gic-its@6020000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- reg = <0x0 0x6020000 0 0x20000>;
- };
- };
-
- rstcr: syscon@1e60000 {
- compatible = "fsl,ls2080a-rstcr", "syscon";
- reg = <0x0 0x1e60000 0x0 0x4>;
- };
-
- reboot {
- compatible ="syscon-reboot";
- regmap = <&rstcr>;
- offset = <0x0>;
- mask = <0x2>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
- <1 14 4>, /* Physical Non-Secure PPI, active-low */
- <1 11 4>, /* Virtual PPI, active-low */
- <1 10 4>; /* Hypervisor PPI, active-low */
- fsl,erratum-a008585;
- };
-
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- clockgen: clocking@1300000 {
- compatible = "fsl,ls2080a-clockgen";
- reg = <0 0x1300000 0 0xa0000>;
- #clock-cells = <2>;
- clocks = <&sysclk>;
- };
-
- serial0: serial@21c0500 {
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0500 0x0 0x100>;
- clocks = <&clockgen 4 3>;
- interrupts = <0 32 0x4>; /* Level high type */
- };
-
- serial1: serial@21c0600 {
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0600 0x0 0x100>;
- clocks = <&clockgen 4 3>;
- interrupts = <0 32 0x4>; /* Level high type */
- };
-
- cluster1_core0_watchdog: wdt@c000000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster1_core1_watchdog: wdt@c010000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster2_core0_watchdog: wdt@c100000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc100000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster2_core1_watchdog: wdt@c110000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc110000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster3_core0_watchdog: wdt@c200000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc200000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster3_core1_watchdog: wdt@c210000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc210000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster4_core0_watchdog: wdt@c300000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc300000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- cluster4_core1_watchdog: wdt@c310000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
- reg = <0x0 0xc310000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "apb_pclk", "wdog_clk";
- };
-
- fsl_mc: fsl-mc@80c000000 {
- compatible = "fsl,qoriq-mc";
- reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
- <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
- msi-parent = <&its>;
- #address-cells = <3>;
- #size-cells = <1>;
-
- /*
- * Region type 0x0 - MC portals
- * Region type 0x1 - QBMAN portals
- */
- ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
- 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
-
- /*
- * Define the maximum number of MACs present on the SoC.
- */
- dpmacs {
- #address-cells = <1>;
- #size-cells = <0>;
-
- dpmac1: dpmac@1 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x1>;
- };
-
- dpmac2: dpmac@2 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x2>;
- };
-
- dpmac3: dpmac@3 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x3>;
- };
-
- dpmac4: dpmac@4 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x4>;
- };
-
- dpmac5: dpmac@5 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x5>;
- };
-
- dpmac6: dpmac@6 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x6>;
- };
-
- dpmac7: dpmac@7 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x7>;
- };
-
- dpmac8: dpmac@8 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x8>;
- };
-
- dpmac9: dpmac@9 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x9>;
- };
-
- dpmac10: dpmac@a {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xa>;
- };
-
- dpmac11: dpmac@b {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xb>;
- };
-
- dpmac12: dpmac@c {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xc>;
- };
-
- dpmac13: dpmac@d {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xd>;
- };
-
- dpmac14: dpmac@e {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xe>;
- };
-
- dpmac15: dpmac@f {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0xf>;
- };
-
- dpmac16: dpmac@10 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <0x10>;
- };
- };
- };
-
- smmu: iommu@5000000 {
- compatible = "arm,mmu-500";
- reg = <0 0x5000000 0 0x800000>;
- #global-interrupts = <12>;
- interrupts = <0 13 4>, /* global secure fault */
- <0 14 4>, /* combined secure interrupt */
- <0 15 4>, /* global non-secure fault */
- <0 16 4>, /* combined non-secure interrupt */
- /* performance counter interrupts 0-7 */
- <0 211 4>, <0 212 4>,
- <0 213 4>, <0 214 4>,
- <0 215 4>, <0 216 4>,
- <0 217 4>, <0 218 4>,
- /* per context interrupt, 64 interrupts */
- <0 146 4>, <0 147 4>,
- <0 148 4>, <0 149 4>,
- <0 150 4>, <0 151 4>,
- <0 152 4>, <0 153 4>,
- <0 154 4>, <0 155 4>,
- <0 156 4>, <0 157 4>,
- <0 158 4>, <0 159 4>,
- <0 160 4>, <0 161 4>,
- <0 162 4>, <0 163 4>,
- <0 164 4>, <0 165 4>,
- <0 166 4>, <0 167 4>,
- <0 168 4>, <0 169 4>,
- <0 170 4>, <0 171 4>,
- <0 172 4>, <0 173 4>,
- <0 174 4>, <0 175 4>,
- <0 176 4>, <0 177 4>,
- <0 178 4>, <0 179 4>,
- <0 180 4>, <0 181 4>,
- <0 182 4>, <0 183 4>,
- <0 184 4>, <0 185 4>,
- <0 186 4>, <0 187 4>,
- <0 188 4>, <0 189 4>,
- <0 190 4>, <0 191 4>,
- <0 192 4>, <0 193 4>,
- <0 194 4>, <0 195 4>,
- <0 196 4>, <0 197 4>,
- <0 198 4>, <0 199 4>,
- <0 200 4>, <0 201 4>,
- <0 202 4>, <0 203 4>,
- <0 204 4>, <0 205 4>,
- <0 206 4>, <0 207 4>,
- <0 208 4>, <0 209 4>;
- mmu-masters = <&fsl_mc 0x300 0>;
- };
-
- dspi: dspi@2100000 {
- status = "disabled";
- compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2100000 0x0 0x10000>;
- interrupts = <0 26 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
- clock-names = "dspi";
- spi-num-chipselects = <5>;
- bus-num = <0>;
- };
-
- esdhc: esdhc@2140000 {
- status = "disabled";
- compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
- reg = <0x0 0x2140000 0x0 0x10000>;
- interrupts = <0 28 0x4>; /* Level high type */
- clock-frequency = <0>; /* Updated by bootloader */
- voltage-ranges = <1800 1800 3300 3300>;
- sdhci,auto-cmd12;
- little-endian;
- bus-width = <4>;
- };
-
- gpio0: gpio@2300000 {
- compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2300000 0x0 0x10000>;
- interrupts = <0 36 0x4>; /* Level high type */
- gpio-controller;
- little-endian;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio1: gpio@2310000 {
- compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2310000 0x0 0x10000>;
- interrupts = <0 36 0x4>; /* Level high type */
- gpio-controller;
- little-endian;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@2320000 {
- compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2320000 0x0 0x10000>;
- interrupts = <0 37 0x4>; /* Level high type */
- gpio-controller;
- little-endian;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@2330000 {
- compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2330000 0x0 0x10000>;
- interrupts = <0 37 0x4>; /* Level high type */
- gpio-controller;
- little-endian;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- i2c0: i2c@2000000 {
- status = "disabled";
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2000000 0x0 0x10000>;
- interrupts = <0 34 0x4>; /* Level high type */
- clock-names = "i2c";
- clocks = <&clockgen 4 3>;
- };
-
- i2c1: i2c@2010000 {
- status = "disabled";
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2010000 0x0 0x10000>;
- interrupts = <0 34 0x4>; /* Level high type */
- clock-names = "i2c";
- clocks = <&clockgen 4 3>;
- };
-
- i2c2: i2c@2020000 {
- status = "disabled";
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2020000 0x0 0x10000>;
- interrupts = <0 35 0x4>; /* Level high type */
- clock-names = "i2c";
- clocks = <&clockgen 4 3>;
- };
-
- i2c3: i2c@2030000 {
- status = "disabled";
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2030000 0x0 0x10000>;
- interrupts = <0 35 0x4>; /* Level high type */
- clock-names = "i2c";
- clocks = <&clockgen 4 3>;
- };
-
- ifc: ifc@2240000 {
- compatible = "fsl,ifc", "simple-bus";
- reg = <0x0 0x2240000 0x0 0x20000>;
- interrupts = <0 21 0x4>; /* Level high type */
- little-endian;
- #address-cells = <2>;
- #size-cells = <1>;
-
- ranges = <0 0 0x5 0x80000000 0x08000000
- 2 0 0x5 0x30000000 0x00010000
- 3 0 0x5 0x20000000 0x00010000>;
- };
-
- qspi: quadspi@20c0000 {
- status = "disabled";
- compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x20c0000 0x0 0x10000>,
- <0x0 0x20000000 0x0 0x10000000>;
- reg-names = "QuadSPI", "QuadSPI-memory";
- interrupts = <0 25 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "qspi_en", "qspi";
- };
-
- pcie@3400000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
- "snps,dw-pcie";
- reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
- 0x10 0x00000000 0x0 0x00002000>; /* configuration space */
- reg-names = "regs", "config";
- interrupts = <0 108 0x4>; /* Level high type */
- interrupt-names = "intr";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- dma-coherent;
- num-lanes = <4>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
- <0000 0 0 2 &gic 0 0 0 110 4>,
- <0000 0 0 3 &gic 0 0 0 111 4>,
- <0000 0 0 4 &gic 0 0 0 112 4>;
- };
-
- pcie@3500000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
- "snps,dw-pcie";
- reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
- 0x12 0x00000000 0x0 0x00002000>; /* configuration space */
- reg-names = "regs", "config";
- interrupts = <0 113 0x4>; /* Level high type */
- interrupt-names = "intr";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- dma-coherent;
- num-lanes = <4>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
- <0000 0 0 2 &gic 0 0 0 115 4>,
- <0000 0 0 3 &gic 0 0 0 116 4>,
- <0000 0 0 4 &gic 0 0 0 117 4>;
- };
-
- pcie@3600000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
- "snps,dw-pcie";
- reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
- 0x14 0x00000000 0x0 0x00002000>; /* configuration space */
- reg-names = "regs", "config";
- interrupts = <0 118 0x4>; /* Level high type */
- interrupt-names = "intr";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- dma-coherent;
- num-lanes = <8>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
- <0000 0 0 2 &gic 0 0 0 120 4>,
- <0000 0 0 3 &gic 0 0 0 121 4>,
- <0000 0 0 4 &gic 0 0 0 122 4>;
- };
-
- pcie@3700000 {
- compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
- "snps,dw-pcie";
- reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
- 0x16 0x00000000 0x0 0x00002000>; /* configuration space */
- reg-names = "regs", "config";
- interrupts = <0 123 0x4>; /* Level high type */
- interrupt-names = "intr";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- dma-coherent;
- num-lanes = <4>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&its>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
- <0000 0 0 2 &gic 0 0 0 125 4>,
- <0000 0 0 3 &gic 0 0 0 126 4>,
- <0000 0 0 4 &gic 0 0 0 127 4>;
- };
-
- sata0: sata@3200000 {
- status = "disabled";
- compatible = "fsl,ls2080a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>;
- interrupts = <0 133 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
- dma-coherent;
- };
-
- sata1: sata@3210000 {
- status = "disabled";
- compatible = "fsl,ls2080a-ahci";
- reg = <0x0 0x3210000 0x0 0x10000>;
- interrupts = <0 136 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
- dma-coherent;
- };
-
- usb0: usb3@3100000 {
- status = "disabled";
- compatible = "snps,dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
- interrupts = <0 80 0x4>; /* Level high type */
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- };
-
- usb1: usb3@3110000 {
- status = "disabled";
- compatible = "snps,dwc3";
- reg = <0x0 0x3110000 0x0 0x10000>;
- interrupts = <0 81 0x4>; /* Level high type */
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- };
-
- ccn@4000000 {
- compatible = "arm,ccn-504";
- reg = <0x0 0x04000000 0x0 0x01000000>;
- interrupts = <0 12 4>;
- };
- };
-
- ddr1: memory-controller@1080000 {
- compatible = "fsl,qoriq-memory-controller";
- reg = <0x0 0x1080000 0x0 0x1000>;
- interrupts = <0 17 0x4>;
- little-endian;
- };
-
- ddr2: memory-controller@1090000 {
- compatible = "fsl,qoriq-memory-controller";
- reg = <0x0 0x1090000 0x0 0x1000>;
- interrupts = <0 18 0x4>;
- little-endian;
+#include "fsl-ls208xa.dtsi"
+
+&cpu {
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x0>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&cluster0_l2>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x1>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&cluster0_l2>;
+ };
+
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x100>;
+ clocks = <&clockgen 1 1>;
+ next-level-cache = <&cluster1_l2>;
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x101>;
+ clocks = <&clockgen 1 1>;
+ next-level-cache = <&cluster1_l2>;
+ };
+
+ cpu4: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x200>;
+ clocks = <&clockgen 1 2>;
+ next-level-cache = <&cluster2_l2>;
+ #cooling-cells = <2>;
+ };
+
+ cpu5: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x201>;
+ clocks = <&clockgen 1 2>;
+ next-level-cache = <&cluster2_l2>;
+ };
+
+ cpu6: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x300>;
+ clocks = <&clockgen 1 3>;
+ next-level-cache = <&cluster3_l2>;
+ #cooling-cells = <2>;
+ };
+
+ cpu7: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x301>;
+ clocks = <&clockgen 1 3>;
+ next-level-cache = <&cluster3_l2>;
};
+
+ cluster0_l2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ cluster1_l2: l2-cache1 {
+ compatible = "cache";
+ };
+
+ cluster2_l2: l2-cache2 {
+ compatible = "cache";
+ };
+
+ cluster3_l2: l2-cache3 {
+ compatible = "cache";
+ };
+};
+
+&usb0 {
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ snps,dma-snooping;
+};
+
+&usb1 {
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ snps,dma-snooping;
+};
+
+&pcie1 {
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x10 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie2 {
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x12 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie3 {
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x14 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie4 {
+ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
+ 0x16 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
@@ -0,0 +1,161 @@
+/*
+ * Device Tree file for NXP LS2081A RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Priyanka Jain <priyanka.jain@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+
+/ {
+ model = "NXP Layerscape 2081A RDB Board";
+ compatible = "fsl,ls2081a-rdb", "fsl,ls2081a";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&ifc {
+ status = "disabled";
+};
+
+&i2c0 {
+ status = "okay";
+ pca9547@75 {
+ compatible = "nxp,pca9547";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01>;
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <500>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7481@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&dspi {
+ status = "okay";
+ dflash0: n25q512a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <0>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ fsl,qspi-has-second-chip;
+ flash0: s25fs512s@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ m25p,fast-read;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+ flash1: s25fs512s@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ m25p,fast-read;
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+ };
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -0,0 +1,162 @@
+/*
+ * Device Tree file for Freescale LS2088A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+#include "fsl-ls208xa-qds.dtsi"
+
+/ {
+ model = "Freescale Layerscape 2088A QDS Board";
+ compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&ifc {
+ boardctrl: board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
+ reg = <3 0 0x300>; /* TODO check address */
+ ranges = <0 3 0 0x300>;
+
+ mdio_mux_emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&emdio1>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1_MDIO */
+
+ #address-cells=<1>;
+ #size-cells = <0>;
+
+ /* Child MDIO buses, one for each riser card:
+ * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
+ * VSC8234 PHYs on the riser cards.
+ */
+
+ mdio_mux3: mdio@60 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio0_phy12: mdio_phy0@1c {
+ reg = <0x1c>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy13: mdio_phy1@1d {
+ reg = <0x1d>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy14: mdio_phy2@1e {
+ reg = <0x1e>;
+ phy-connection-type = "sgmii";
+ };
+ mdio0_phy15: mdio_phy3@1f {
+ reg = <0x1f>;
+ phy-connection-type = "sgmii";
+ };
+ };
+ };
+ };
+};
+
+&pcs_mdio1 {
+ pcs_phy1: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x9C0 0x40>;/* lane H */
+ };
+};
+
+&pcs_mdio2 {
+ pcs_phy2: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x980 0x40>;/* lane G */
+ };
+};
+
+&pcs_mdio3 {
+ pcs_phy3: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x940 0x40>;/* lane F */
+ };
+};
+
+&pcs_mdio4 {
+ pcs_phy4: ethernet-phy@0 {
+ backplane-mode = "10gbase-kr";
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ fsl,lane-handle = <&serdes1>;
+ fsl,lane-reg = <0x900 0x40>;/* lane E */
+ };
+};
+
+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
+&dpmac9 {
+ phy-handle = <&mdio0_phy12>;
+};
+&dpmac10 {
+ phy-handle = <&mdio0_phy13>;
+};
+&dpmac11 {
+ phy-handle = <&mdio0_phy14>;
+};
+&dpmac12 {
+ phy-handle = <&mdio0_phy15>;
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -0,0 +1,140 @@
+/*
+ * Device Tree file for Freescale LS2088A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+#include "fsl-ls208xa-rdb.dtsi"
+
+/ {
+ model = "Freescale Layerscape 2088A RDB Board";
+ compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+};
+
+&emdio1 {
+ status = "disabled";
+ /* CS4340 PHYs */
+ mdio1_phy1: emdio1_phy@1 {
+ reg = <0x10>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy2: emdio1_phy@2 {
+ reg = <0x11>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy3: emdio1_phy@3 {
+ reg = <0x12>;
+ phy-connection-type = "xfi";
+ };
+ mdio1_phy4: emdio1_phy@4 {
+ reg = <0x13>;
+ phy-connection-type = "xfi";
+ };
+};
+
+&emdio2 {
+ /* AQR405 PHYs */
+ mdio2_phy1: emdio2_phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 1 0x4>; /* Level high type */
+ reg = <0x0>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy2: emdio2_phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 2 0x4>; /* Level high type */
+ reg = <0x1>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy3: emdio2_phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 4 0x4>; /* Level high type */
+ reg = <0x2>;
+ phy-connection-type = "xfi";
+ };
+ mdio2_phy4: emdio2_phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 5 0x4>; /* Level high type */
+ reg = <0x3>;
+ phy-connection-type = "xfi";
+ };
+};
+
+/* Update DPMAC connections to external PHYs, under the assumption of
+ * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
+ */
+/* Leave Cortina PHYs commented out until proper driver is integrated
+ *&dpmac1 {
+ * phy-handle = <&mdio1_phy1>;
+ *};
+ *&dpmac2 {
+ * phy-handle = <&mdio1_phy2>;
+ *};
+ *&dpmac3 {
+ * phy-handle = <&mdio1_phy3>;
+ *};
+ *&dpmac4 {
+ * phy-handle = <&mdio1_phy4>;
+ *};
+ */
+
+&dpmac5 {
+ phy-handle = <&mdio2_phy1>;
+};
+&dpmac6 {
+ phy-handle = <&mdio2_phy2>;
+};
+&dpmac7 {
+ phy-handle = <&mdio2_phy3>;
+};
+&dpmac8 {
+ phy-handle = <&mdio2_phy4>;
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -0,0 +1,195 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-2088A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "fsl-ls208xa.dtsi"
+
+&cpu {
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x0>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&cluster0_l2>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x1>;
+ clocks = <&clockgen 1 0>;
+ next-level-cache = <&cluster0_l2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x100>;
+ clocks = <&clockgen 1 1>;
+ next-level-cache = <&cluster1_l2>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x101>;
+ clocks = <&clockgen 1 1>;
+ next-level-cache = <&cluster1_l2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu4: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x200>;
+ clocks = <&clockgen 1 2>;
+ next-level-cache = <&cluster2_l2>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu5: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x201>;
+ clocks = <&clockgen 1 2>;
+ next-level-cache = <&cluster2_l2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu6: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x300>;
+ clocks = <&clockgen 1 3>;
+ next-level-cache = <&cluster3_l2>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ cpu7: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x301>;
+ clocks = <&clockgen 1 3>;
+ next-level-cache = <&cluster3_l2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ idle-states {
+ /*
+ * PSCI node is not added default, U-boot will add missing
+ * parts if it determines to use PSCI.
+ */
+ entry-method = "arm,psci";
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
+ };
+ };
+
+ cluster0_l2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ cluster1_l2: l2-cache1 {
+ compatible = "cache";
+ };
+
+ cluster2_l2: l2-cache2 {
+ compatible = "cache";
+ };
+
+ cluster3_l2: l2-cache3 {
+ compatible = "cache";
+ };
+};
+
+&pcie1 {
+ compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>;
+};
+
+&pcie2 {
+ compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>;
+};
+
+&pcie3 {
+ compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>;
+};
+
+&pcie4 {
+ compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
+ 0x38 0x00000000 0x0 0x00002000>; /* configuration space */
+
+ ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000
+ 0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>;
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -0,0 +1,198 @@
+/*
+ * Device Tree file for Freescale LS2080A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&esdhc {
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+ 0x2 0x0 0x5 0x30000000 0x00010000
+ 0x3 0x0 0x5 0x20000000 0x00010000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ cpld@3,0 {
+ reg = <0x3 0x0 0x10000>;
+ compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pca9547@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00>;
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <500>;
+ };
+
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7481@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+&dspi {
+ status = "okay";
+ dflash0: n25q128a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <0>;
+ };
+ dflash1: sst25wf040b {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <1>;
+ };
+ dflash2: en25s64 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <2>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash0: s25fl256s1@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+ flash2: s25fl256s1@2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -0,0 +1,161 @@
+/*
+ * Device Tree file for Freescale LS2080A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&esdhc {
+ status = "okay";
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+ 0x2 0x0 0x5 0x30000000 0x00010000
+ 0x3 0x0 0x5 0x20000000 0x00010000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@2,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x2 0x0 0x10000>;
+ };
+
+ cpld@3,0 {
+ reg = <0x3 0x0 0x10000>;
+ compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+ };
+
+};
+
+&i2c0 {
+ status = "okay";
+ pca9547@75 {
+ compatible = "nxp,pca9547";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-never-disable;
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01>;
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ adt7481@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+&dspi {
+ status = "okay";
+ dflash0: n25q512a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ spi-max-frequency = <3000000>;
+ reg = <0>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash0: s25fs512s@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ m25p,fast-read;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -0,0 +1,910 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-2080A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "fsl,ls2080a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ crypto = &crypto;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
+ cpu: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>;
+ /* DRAM space - 1, size : 2 GB DRAM */
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+ };
+
+ gic: interrupt-controller@6000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
+ <0x0 0x0c0c0000 0 0x2000>, /* GICC */
+ <0x0 0x0c0d0000 0 0x1000>, /* GICH */
+ <0x0 0x0c0e0000 0 0x20000>; /* GICV */
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ interrupts = <1 9 0x4>;
+
+ its: gic-its@6020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x6020000 0 0x20000>;
+ };
+ };
+
+ rstcr: syscon@1e60000 {
+ compatible = "fsl,ls2080a-rstcr", "syscon";
+ reg = <0x0 0x1e60000 0x0 0x4>;
+ };
+
+ reboot {
+ compatible ="syscon-reboot";
+ regmap = <&rstcr>;
+ offset = <0x0>;
+ mask = <0x2>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
+ <1 14 4>, /* Physical Non-Secure PPI, active-low */
+ <1 11 4>, /* Virtual PPI, active-low */
+ <1 10 4>; /* Hypervisor PPI, active-low */
+ fsl,erratum-a008585;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clockgen: clocking@1300000 {
+ compatible = "fsl,ls2080a-clockgen";
+ reg = <0 0x1300000 0 0xa0000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
+ };
+
+ dcfg: dcfg@1e00000 {
+ compatible = "fsl,ls2080a-dcfg", "syscon";
+ reg = <0x0 0x1e00000 0x0 0x10000>;
+ little-endian;
+ };
+
+ tmu: tmu@1f80000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f80000 0x0 0x10000>;
+ interrupts = <0 23 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+ fsl,tmu-calibration = <0x00000000 0x00000026
+ 0x00000001 0x0000002d
+ 0x00000002 0x00000032
+ 0x00000003 0x00000039
+ 0x00000004 0x0000003f
+ 0x00000005 0x00000046
+ 0x00000006 0x0000004d
+ 0x00000007 0x00000054
+ 0x00000008 0x0000005a
+ 0x00000009 0x00000061
+ 0x0000000a 0x0000006a
+ 0x0000000b 0x00000071
+
+ 0x00010000 0x00000025
+ 0x00010001 0x0000002c
+ 0x00010002 0x00000035
+ 0x00010003 0x0000003d
+ 0x00010004 0x00000045
+ 0x00010005 0x0000004e
+ 0x00010006 0x00000057
+ 0x00010007 0x00000061
+ 0x00010008 0x0000006b
+ 0x00010009 0x00000076
+
+ 0x00020000 0x00000029
+ 0x00020001 0x00000033
+ 0x00020002 0x0000003d
+ 0x00020003 0x00000049
+ 0x00020004 0x00000056
+ 0x00020005 0x00000061
+ 0x00020006 0x0000006d
+
+ 0x00030000 0x00000021
+ 0x00030001 0x0000002a
+ 0x00030002 0x0000003c
+ 0x00030003 0x0000004e>;
+ little-endian;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&tmu 4>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu-crit {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu2 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map2 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu4 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map3 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu6 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ serial0: serial@21c0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 0x4>; /* Level high type */
+ };
+
+ serial1: serial@21c0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0600 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 32 0x4>; /* Level high type */
+ };
+
+ cluster1_core0_watchdog: wdt@c000000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc000000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core1_watchdog: wdt@c010000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc010000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core0_watchdog: wdt@c100000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc100000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core1_watchdog: wdt@c110000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc110000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster3_core0_watchdog: wdt@c200000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc200000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster3_core1_watchdog: wdt@c210000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc210000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster4_core0_watchdog: wdt@c300000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc300000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster4_core1_watchdog: wdt@c310000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc310000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ crypto: crypto@8000000 {
+ compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+ fsl,sec-era = <8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x8000000 0x100000>;
+ reg = <0x00 0x8000000 0x0 0x100000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ fsl_mc: fsl-mc@80c000000 {
+ compatible = "fsl,qoriq-mc";
+ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
+ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */
+ #address-cells = <3>;
+ #size-cells = <1>;
+
+ /*
+ * Region type 0x0 - MC portals
+ * Region type 0x1 - QBMAN portals
+ */
+ ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+ 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+ /*
+ * Define the maximum number of MACs present on the SoC.
+ */
+ dpmacs {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpmac1: dpmac@1 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x1>;
+ };
+
+ dpmac2: dpmac@2 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x2>;
+ };
+
+ dpmac3: dpmac@3 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x3>;
+ };
+
+ dpmac4: dpmac@4 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x4>;
+ };
+
+ dpmac5: dpmac@5 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x5>;
+ };
+
+ dpmac6: dpmac@6 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x6>;
+ };
+
+ dpmac7: dpmac@7 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x7>;
+ };
+
+ dpmac8: dpmac@8 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x8>;
+ };
+
+ dpmac9: dpmac@9 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x9>;
+ };
+
+ dpmac10: dpmac@a {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xa>;
+ };
+
+ dpmac11: dpmac@b {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xb>;
+ };
+
+ dpmac12: dpmac@c {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xc>;
+ };
+
+ dpmac13: dpmac@d {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xd>;
+ };
+
+ dpmac14: dpmac@e {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xe>;
+ };
+
+ dpmac15: dpmac@f {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xf>;
+ };
+
+ dpmac16: dpmac@10 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x10>;
+ };
+ };
+ };
+
+ smmu: iommu@5000000 {
+ compatible = "arm,mmu-500";
+ reg = <0 0x5000000 0 0x800000>;
+ #global-interrupts = <12>;
+ #iommu-cells = <1>;
+ stream-match-mask = <0x7C00>;
+ interrupts = <0 13 4>, /* global secure fault */
+ <0 14 4>, /* combined secure interrupt */
+ <0 15 4>, /* global non-secure fault */
+ <0 16 4>, /* combined non-secure interrupt */
+ /* performance counter interrupts 0-7 */
+ <0 211 4>, <0 212 4>,
+ <0 213 4>, <0 214 4>,
+ <0 215 4>, <0 216 4>,
+ <0 217 4>, <0 218 4>,
+ /* per context interrupt, 64 interrupts */
+ <0 146 4>, <0 147 4>,
+ <0 148 4>, <0 149 4>,
+ <0 150 4>, <0 151 4>,
+ <0 152 4>, <0 153 4>,
+ <0 154 4>, <0 155 4>,
+ <0 156 4>, <0 157 4>,
+ <0 158 4>, <0 159 4>,
+ <0 160 4>, <0 161 4>,
+ <0 162 4>, <0 163 4>,
+ <0 164 4>, <0 165 4>,
+ <0 166 4>, <0 167 4>,
+ <0 168 4>, <0 169 4>,
+ <0 170 4>, <0 171 4>,
+ <0 172 4>, <0 173 4>,
+ <0 174 4>, <0 175 4>,
+ <0 176 4>, <0 177 4>,
+ <0 178 4>, <0 179 4>,
+ <0 180 4>, <0 181 4>,
+ <0 182 4>, <0 183 4>,
+ <0 184 4>, <0 185 4>,
+ <0 186 4>, <0 187 4>,
+ <0 188 4>, <0 189 4>,
+ <0 190 4>, <0 191 4>,
+ <0 192 4>, <0 193 4>,
+ <0 194 4>, <0 195 4>,
+ <0 196 4>, <0 197 4>,
+ <0 198 4>, <0 199 4>,
+ <0 200 4>, <0 201 4>,
+ <0 202 4>, <0 203 4>,
+ <0 204 4>, <0 205 4>,
+ <0 206 4>, <0 207 4>,
+ <0 208 4>, <0 209 4>;
+ };
+
+ dspi: dspi@2100000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <0 26 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <0>;
+ };
+
+ esdhc: esdhc@2140000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ clocks = <&clockgen 4 1>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ little-endian;
+ bus-width = <4>;
+ };
+
+ gpio0: gpio@2300000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@2310000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2320000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@2330000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* TODO: WRIOP (CCSR?) */
+ emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000,
+ * E-MDIO1: 0x1_6000
+ */
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8B96000 0x0 0x1000>;
+ device_type = "mdio"; /* TODO: is this necessary? */
+ little-endian; /* force the driver in LE mode */
+
+ /* Not necessary on the QDS, but needed on the RDB */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000,
+ * E-MDIO2: 0x1_7000
+ */
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8B97000 0x0 0x1000>;
+ device_type = "mdio"; /* TODO: is this necessary? */
+ little-endian; /* force the driver in LE mode */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio1: mdio@0x8c07000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c07000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio2: mdio@0x8c0b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0b000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio3: mdio@0x8c0f000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0f000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio4: mdio@0x8c13000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c13000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio5: mdio@0x8c17000 {
+ status = "disabled";
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c17000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio6: mdio@0x8c1b000 {
+ status = "disabled";
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c1b000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio7: mdio@0x8c1f000 {
+ status = "disabled";
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c1f000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcs_mdio8: mdio@0x8c23000 {
+ status = "disabled";
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c23000 0x0 0x1000>;
+ device_type = "mdio";
+ little-endian;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c0: i2c@2000000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts = <0 34 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c1: i2c@2010000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2010000 0x0 0x10000>;
+ interrupts = <0 34 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c2: i2c@2020000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2020000 0x0 0x10000>;
+ interrupts = <0 35 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ i2c3: i2c@2030000 {
+ status = "disabled";
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2030000 0x0 0x10000>;
+ interrupts = <0 35 0x4>; /* Level high type */
+ clock-names = "i2c";
+ clocks = <&clockgen 4 3>;
+ };
+
+ ifc: ifc@2240000 {
+ compatible = "fsl,ifc", "simple-bus";
+ reg = <0x0 0x2240000 0x0 0x20000>;
+ interrupts = <0 21 0x4>; /* Level high type */
+ little-endian;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0x5 0x80000000 0x08000000
+ 2 0 0x5 0x30000000 0x00010000
+ 3 0 0x5 0x20000000 0x00010000>;
+ };
+
+ qspi: quadspi@20c0000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 25 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "qspi_en", "qspi";
+ };
+
+ pcie1: pcie@3400000 {
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
+ reg-names = "regs", "config";
+ interrupts = <0 108 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
+ <0000 0 0 2 &gic 0 0 0 110 4>,
+ <0000 0 0 3 &gic 0 0 0 111 4>,
+ <0000 0 0 4 &gic 0 0 0 112 4>;
+ };
+
+ pcie2: pcie@3500000 {
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
+ reg-names = "regs", "config";
+ interrupts = <0 113 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
+ <0000 0 0 2 &gic 0 0 0 115 4>,
+ <0000 0 0 3 &gic 0 0 0 116 4>,
+ <0000 0 0 4 &gic 0 0 0 117 4>;
+ };
+
+ pcie3: pcie@3600000 {
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
+ reg-names = "regs", "config";
+ interrupts = <0 118 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <8>;
+ bus-range = <0x0 0xff>;
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
+ <0000 0 0 2 &gic 0 0 0 120 4>,
+ <0000 0 0 3 &gic 0 0 0 121 4>,
+ <0000 0 0 4 &gic 0 0 0 122 4>;
+ };
+
+ pcie4: pcie@3700000 {
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
+ reg-names = "regs", "config";
+ interrupts = <0 123 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ msi-parent = <&its>;
+ iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
+ <0000 0 0 2 &gic 0 0 0 125 4>,
+ <0000 0 0 3 &gic 0 0 0 126 4>,
+ <0000 0 0 4 &gic 0 0 0 127 4>;
+ };
+
+ sata0: sata@3200000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>;
+ interrupts = <0 133 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ };
+
+ sata1: sata@3210000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-ahci";
+ reg = <0x0 0x3210000 0x0 0x10000>;
+ interrupts = <0 136 0x4>; /* Level high type */
+ clocks = <&clockgen 4 3>;
+ dma-coherent;
+ };
+
+ usb0: usb3@3100000 {
+ status = "disabled";
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 0x4>; /* Level high type */
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ usb1: usb3@3110000 {
+ status = "disabled";
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 0x4>; /* Level high type */
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ serdes1: serdes@1ea0000 {
+ reg = <0x0 0x1ea0000 0 0x00002000>;
+ };
+
+ ccn@4000000 {
+ compatible = "arm,ccn-504";
+ reg = <0x0 0x04000000 0x0 0x01000000>;
+ interrupts = <0 12 4>;
+ };
+
+ ftm0: ftm0@2800000 {
+ compatible = "fsl,ftm-alarm";
+ reg = <0x0 0x2800000 0x0 0x10000>;
+ interrupts = <0 44 4>;
+ };
+ };
+
+ ddr1: memory-controller@1080000 {
+ compatible = "fsl,qoriq-memory-controller";
+ reg = <0x0 0x1080000 0x0 0x1000>;
+ interrupts = <0 17 0x4>;
+ little-endian;
+ };
+
+ ddr2: memory-controller@1090000 {
+ compatible = "fsl,qoriq-memory-controller";
+ reg = <0x0 0x1090000 0x0 0x1000>;
+ interrupts = <0 18 0x4>;
+ little-endian;
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
@@ -0,0 +1,81 @@
+/*
+ * QorIQ BMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&bportals {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+
+ bman-portal@0 {
+ cell-index = <0>;
+ compatible = "fsl,bman-portal";
+ reg = <0x0 0x4000 0x4000000 0x4000>;
+ interrupts = <0 173 0x4>;
+ };
+
+ bman-portal@10000 {
+ cell-index = <1>;
+ compatible = "fsl,bman-portal";
+ reg = <0x10000 0x4000 0x4010000 0x4000>;
+ interrupts = <0 175 0x4>;
+ };
+
+ bman-portal@20000 {
+ cell-index = <2>;
+ compatible = "fsl,bman-portal";
+ reg = <0x20000 0x4000 0x4020000 0x4000>;
+ interrupts = <0 177 0x4>;
+ };
+
+ bman-portal@30000 {
+ cell-index = <3>;
+ compatible = "fsl,bman-portal";
+ reg = <0x30000 0x4000 0x4030000 0x4000>;
+ interrupts = <0 179 0x4>;
+ };
+
+ bman-portal@40000 {
+ cell-index = <4>;
+ compatible = "fsl,bman-portal";
+ reg = <0x40000 0x4000 0x4040000 0x4000>;
+ interrupts = <0 181 0x4>;
+ };
+
+ bman-portal@50000 {
+ cell-index = <5>;
+ compatible = "fsl,bman-portal";
+ reg = <0x50000 0x4000 0x4050000 0x4000>;
+ interrupts = <0 183 0x4>;
+ };
+
+ bman-portal@60000 {
+ cell-index = <6>;
+ compatible = "fsl,bman-portal";
+ reg = <0x60000 0x4000 0x4060000 0x4000>;
+ interrupts = <0 185 0x4>;
+ };
+
+ bman-portal@70000 {
+ cell-index = <7>;
+ compatible = "fsl,bman-portal";
+ reg = <0x70000 0x4000 0x4070000 0x4000>;
+ interrupts = <0 187 0x4>;
+ };
+
+ bman-portal@80000 {
+ cell-index = <8>;
+ compatible = "fsl,bman-portal";
+ reg = <0x80000 0x4000 0x4080000 0x4000>;
+ interrupts = <0 189 0x4>;
+ };
+
+ bman-bpids@0 {
+ compatible = "fsl,bpid-range";
+ fsl,bpid-range = <32 32>;
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fsldpaa: fsl,dpaa {
+ compatible = "fsl,ls1043a-dpaa", "simple-bus", "fsl,dpaa";
+ ethernet@0 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet0>;
+ };
+ ethernet@1 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet1>;
+ };
+ ethernet@2 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet2>;
+ };
+ ethernet@3 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet3>;
+ };
+ ethernet@4 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet4>;
+ };
+ ethernet@5 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet5>;
+ };
+ ethernet@8 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&enet6>;
+ };
+};
+
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * QorIQ FMan v3 10g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x10: port@90000 {
+ cell-index = <0x10>;
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx";
+ reg = <0x90000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x30: port@b0000 {
+ cell-index = <0x30>;
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx";
+ reg = <0xb0000 0x1000>;
+ fsl,fman-10g-port;
+ fsl,qman-channel-id = <0x800>;
+ };
+
+ ethernet@f0000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-memac";
+ reg = <0xf0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+ pcsphy-handle = <&pcsphy6>;
+ };
+
+ mdio@f1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+
+ pcsphy6: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -0,0 +1,43 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x11: port@91000 {
+ cell-index = <0x11>;
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx";
+ reg = <0x91000 0x1000>;
+ fsl,fman-10g-port;
+ };
+
+ fman0_tx_0x31: port@b1000 {
+ cell-index = <0x31>;
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx";
+ reg = <0xb1000 0x1000>;
+ fsl,fman-10g-port;
+ fsl,qman-channel-id = <0x801>;
+ };
+
+ ethernet@f2000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-memac";
+ reg = <0xf2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+ pcsphy-handle = <&pcsphy7>;
+ };
+
+ mdio@f3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xf3000 0x1000>;
+
+ pcsphy7: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x08: port@88000 {
+ cell-index = <0x8>;
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
+ reg = <0x88000 0x1000>;
+ };
+
+ fman0_tx_0x28: port@a8000 {
+ cell-index = <0x28>;
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
+ reg = <0xa8000 0x1000>;
+ fsl,qman-channel-id = <0x802>;
+ };
+
+ ethernet@e0000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe0000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy0>;
+ };
+
+ mdio@e1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe1000 0x1000>;
+
+ pcsphy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x09: port@89000 {
+ cell-index = <0x9>;
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
+ reg = <0x89000 0x1000>;
+ };
+
+ fman0_tx_0x29: port@a9000 {
+ cell-index = <0x29>;
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
+ reg = <0xa9000 0x1000>;
+ fsl,qman-channel-id = <0x803>;
+ };
+
+ ethernet@e2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe2000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy1>;
+ };
+
+ mdio@e3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe3000 0x1000>;
+
+ pcsphy1: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -0,0 +1,42 @@
+/*
+ * QorIQ FMan v3 1g port #2 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0a: port@8a000 {
+ cell-index = <0xa>;
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
+ reg = <0x8a000 0x1000>;
+ };
+
+ fman0_tx_0x2a: port@aa000 {
+ cell-index = <0x2a>;
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
+ reg = <0xaa000 0x1000>;
+ fsl,qman-channel-id = <0x804>;
+ };
+
+ ethernet@e4000 {
+ cell-index = <2>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe4000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy2>;
+ };
+
+ mdio@e5000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe5000 0x1000>;
+
+ pcsphy2: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -0,0 +1,42 @@
+/*
+ * QorIQ FMan v3 1g port #3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0b: port@8b000 {
+ cell-index = <0xb>;
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
+ reg = <0x8b000 0x1000>;
+ };
+
+ fman0_tx_0x2b: port@ab000 {
+ cell-index = <0x2b>;
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
+ reg = <0xab000 0x1000>;
+ fsl,qman-channel-id = <0x805>;
+ };
+
+ ethernet@e6000 {
+ cell-index = <3>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe6000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy3>;
+ };
+
+ mdio@e7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe7000 0x1000>;
+
+ pcsphy3: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -0,0 +1,42 @@
+/*
+ * QorIQ FMan v3 1g port #4 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0c: port@8c000 {
+ cell-index = <0xc>;
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
+ reg = <0x8c000 0x1000>;
+ };
+
+ fman0_tx_0x2c: port@ac000 {
+ cell-index = <0x2c>;
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
+ reg = <0xac000 0x1000>;
+ fsl,qman-channel-id = <0x806>;
+ };
+
+ ethernet@e8000 {
+ cell-index = <4>;
+ compatible = "fsl,fman-memac";
+ reg = <0xe8000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy4>;
+ };
+
+ mdio@e9000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xe9000 0x1000>;
+
+ pcsphy4: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -0,0 +1,42 @@
+/*
+ * QorIQ FMan v3 1g port #5 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+ fman0_rx_0x0d: port@8d000 {
+ cell-index = <0xd>;
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx";
+ reg = <0x8d000 0x1000>;
+ };
+
+ fman0_tx_0x2d: port@ad000 {
+ cell-index = <0x2d>;
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx";
+ reg = <0xad000 0x1000>;
+ fsl,qman-channel-id = <0x807>;
+ };
+
+ ethernet@ea000 {
+ cell-index = <5>;
+ compatible = "fsl,fman-memac";
+ reg = <0xea000 0x1000>;
+ fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+ ptp-timer = <&ptp_timer0>;
+ pcsphy-handle = <&pcsphy5>;
+ };
+
+ mdio@eb000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xeb000 0x1000>;
+
+ pcsphy5: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-6oh.dtsi
@@ -0,0 +1,47 @@
+/*
+ * QorIQ FMan v3 OH ports device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+
+ fman0_oh1: port@82000 {
+ cell-index = <0>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x82000 0x1000>;
+ };
+
+ fman0_oh2: port@83000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+
+ fman0_oh3: port@84000 {
+ cell-index = <2>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x84000 0x1000>;
+ };
+
+ fman0_oh4: port@85000 {
+ cell-index = <3>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x85000 0x1000>;
+ };
+
+ fman0_oh5: port@86000 {
+ cell-index = <4>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x86000 0x1000>;
+ };
+
+ fman0_oh6: port@87000 {
+ cell-index = <5>;
+ compatible = "fsl,fman-port-oh";
+ reg = <0x87000 0x1000>;
+ };
+
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -0,0 +1,130 @@
+/*
+ * QorIQ FMan v3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman0: fman@1a00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ compatible = "fsl,fman";
+ ranges = <0x0 0x00 0x1a00000 0x100000>;
+ reg = <0x0 0x1a00000 0x0 0x100000>;
+ interrupts = <0 44 0x4>, <0 45 0x4>;
+ clocks = <&clockgen 3 0>;
+ clock-names = "fmanclk";
+ fsl,qman-channel-range = <0x800 0x10>;
+
+ cc {
+ compatible = "fsl,fman-cc";
+ };
+
+ muram@0 {
+ compatible = "fsl,fman-muram";
+ reg = <0x0 0x60000>;
+ };
+
+ bmi@80000 {
+ compatible = "fsl,fman-bmi";
+ reg = <0x80000 0x400>;
+ };
+
+ qmi@80400 {
+ compatible = "fsl,fman-qmi";
+ reg = <0x80400 0x400>;
+ };
+
+ fman0_oh_0x2: port@82000 {
+ cell-index = <0x2>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x82000 0x1000>;
+ fsl,qman-channel-id = <0x809>;
+ };
+
+ fman0_oh_0x3: port@83000 {
+ cell-index = <0x3>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x83000 0x1000>;
+ fsl,qman-channel-id = <0x80a>;
+ };
+
+ fman0_oh_0x4: port@84000 {
+ cell-index = <0x4>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x84000 0x1000>;
+ fsl,qman-channel-id = <0x80b>;
+ };
+
+ fman0_oh_0x5: port@85000 {
+ cell-index = <0x5>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x85000 0x1000>;
+ fsl,qman-channel-id = <0x80c>;
+ };
+
+ fman0_oh_0x6: port@86000 {
+ cell-index = <0x6>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x86000 0x1000>;
+ fsl,qman-channel-id = <0x80d>;
+ };
+
+ fman0_oh_0x7: port@87000 {
+ cell-index = <0x7>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x87000 0x1000>;
+ fsl,qman-channel-id = <0x80e>;
+ };
+
+ policer@c0000 {
+ compatible = "fsl,fman-policer";
+ reg = <0xc0000 0x1000>;
+ };
+
+ keygen@c1000 {
+ compatible = "fsl,fman-keygen";
+ reg = <0xc1000 0x1000>;
+ };
+
+ dma@c2000 {
+ compatible = "fsl,fman-dma";
+ reg = <0xc2000 0x1000>;
+ };
+
+ fpm@c3000 {
+ compatible = "fsl,fman-fpm";
+ reg = <0xc3000 0x1000>;
+ };
+
+ parser@c7000 {
+ compatible = "fsl,fman-parser";
+ reg = <0xc7000 0x1000>;
+ };
+
+ vsps@dc000 {
+ compatible = "fsl,fman-vsps";
+ reg = <0xdc000 0x1000>;
+ };
+
+ mdio0: mdio@fc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfc000 0x1000>;
+ };
+
+ xmdio0: mdio@fd000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfd000 0x1000>;
+ };
+
+ ptp_timer0: ptp-timer@fe000 {
+ compatible = "fsl,fman-ptp-timer", "fsl,fman-rtc";
+ reg = <0xfe000 0x1000>;
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
@@ -0,0 +1,104 @@
+/*
+ * QorIQ QMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&qportals {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+
+ qportal0: qman-portal@0 {
+ compatible = "fsl,qman-portal";
+ reg = <0x0 0x4000 0x4000000 0x4000>;
+ interrupts = <0 172 0x4>;
+ cell-index = <0>;
+ };
+
+ qportal1: qman-portal@10000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x10000 0x4000 0x4010000 0x4000>;
+ interrupts = <0 174 0x4>;
+ cell-index = <1>;
+ };
+
+ qportal2: qman-portal@20000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x20000 0x4000 0x4020000 0x4000>;
+ interrupts = <0 176 0x4>;
+ cell-index = <2>;
+ };
+
+ qportal3: qman-portal@30000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x30000 0x4000 0x4030000 0x4000>;
+ interrupts = <0 178 0x4>;
+ cell-index = <3>;
+ };
+
+ qportal4: qman-portal@40000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x40000 0x4000 0x4040000 0x4000>;
+ interrupts = <0 180 0x4>;
+ cell-index = <4>;
+ };
+
+ qportal5: qman-portal@50000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x50000 0x4000 0x4050000 0x4000>;
+ interrupts = <0 182 0x4>;
+ cell-index = <5>;
+ };
+
+ qportal6: qman-portal@60000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x60000 0x4000 0x4060000 0x4000>;
+ interrupts = <0 184 0x4>;
+ cell-index = <6>;
+ };
+
+ qportal7: qman-portal@70000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x70000 0x4000 0x4070000 0x4000>;
+ interrupts = <0 186 0x4>;
+ cell-index = <7>;
+ };
+
+ qportal8: qman-portal@80000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x80000 0x4000 0x4080000 0x4000>;
+ interrupts = <0 188 0x4>;
+ cell-index = <8>;
+ };
+
+ qman-fqids@0 {
+ compatible = "fsl,fqid-range";
+ fsl,fqid-range = <256 256>;
+ };
+
+ qman-fqids@1 {
+ compatible = "fsl,fqid-range";
+ fsl,fqid-range = <32768 32768>;
+ };
+
+ qman-pools@0 {
+ compatible = "fsl,pool-channel-range";
+ fsl,pool-channel-range = <0x401 0xf>;
+ };
+
+ qman-cgrids@0 {
+ compatible = "fsl,cgrid-range";
+ fsl,cgrid-range = <0 256>;
+ };
+
+ qman-ceetm@0 {
+ compatible = "fsl,qman-ceetm";
+ fsl,ceetm-lfqid-range = <0xf00000 0x1000>;
+ fsl,ceetm-sp-range = <0 12>;
+ fsl,ceetm-lni-range = <0 8>;
+ fsl,ceetm-channel-range = <0 32>;
+ };
+};
--- a/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi
@@ -38,51 +38,61 @@
compatible = "simple-bus";
bman-portal@0 {
+ cell-index = <0>;
compatible = "fsl,bman-portal";
reg = <0x0 0x4000>, <0x100000 0x1000>;
interrupts = <105 2 0 0>;
};
bman-portal@4000 {
+ cell-index = <1>;
compatible = "fsl,bman-portal";
reg = <0x4000 0x4000>, <0x101000 0x1000>;
interrupts = <107 2 0 0>;
};
bman-portal@8000 {
+ cell-index = <2>;
compatible = "fsl,bman-portal";
reg = <0x8000 0x4000>, <0x102000 0x1000>;
interrupts = <109 2 0 0>;
};
bman-portal@c000 {
+ cell-index = <3>;
compatible = "fsl,bman-portal";
reg = <0xc000 0x4000>, <0x103000 0x1000>;
interrupts = <111 2 0 0>;
};
bman-portal@10000 {
+ cell-index = <4>;
compatible = "fsl,bman-portal";
reg = <0x10000 0x4000>, <0x104000 0x1000>;
interrupts = <113 2 0 0>;
};
bman-portal@14000 {
+ cell-index = <5>;
compatible = "fsl,bman-portal";
reg = <0x14000 0x4000>, <0x105000 0x1000>;
interrupts = <115 2 0 0>;
};
bman-portal@18000 {
+ cell-index = <6>;
compatible = "fsl,bman-portal";
reg = <0x18000 0x4000>, <0x106000 0x1000>;
interrupts = <117 2 0 0>;
};
bman-portal@1c000 {
+ cell-index = <7>;
compatible = "fsl,bman-portal";
reg = <0x1c000 0x4000>, <0x107000 0x1000>;
interrupts = <119 2 0 0>;
};
bman-portal@20000 {
+ cell-index = <8>;
compatible = "fsl,bman-portal";
reg = <0x20000 0x4000>, <0x108000 0x1000>;
interrupts = <121 2 0 0>;
};
bman-portal@24000 {
+ cell-index = <9>;
compatible = "fsl,bman-portal";
reg = <0x24000 0x4000>, <0x109000 0x1000>;
interrupts = <123 2 0 0>;
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -35,14 +35,14 @@
fman@400000 {
fman0_rx_0x10: port@90000 {
cell-index = <0x10>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx";
reg = <0x90000 0x1000>;
fsl,fman-10g-port;
};
fman0_tx_0x30: port@b0000 {
cell-index = <0x30>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx";
reg = <0xb0000 0x1000>;
fsl,fman-10g-port;
};
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -35,14 +35,14 @@
fman@400000 {
fman0_rx_0x11: port@91000 {
cell-index = <0x11>;
- compatible = "fsl,fman-v3-port-rx";
+ compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx";
reg = <0x91000 0x1000>;
fsl,fman-10g-port;
};
fman0_tx_0x31: port@b1000 {
cell-index = <0x31>;
- compatible = "fsl,fman-v3-port-tx";
+ compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx";
reg = <0xb1000 0x1000>;
fsl,fman-10g-port;
};
Reference in New Issue View Git Blame Copy Permalink