Right now all brcm2708 patches are extracted from the non-mainline raspberrypi/linux git tree. Many of them are hacks and/or are unneeded in LEDE. Raspberry Pi is getting better and better mainline support so it would be nice to finally start maintaining patches in a cleaner way: 1) Backport patches accepted in upstream tree 2) Start using upstream drivers 3) Pick only these patches that are needed for more complete support Handling above tasks requires grouping patches - ideally using the same prefixes as generic ones. It means we should rename existing patches to use some high prefix. This will allow e.g. use 0xx for backported code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
		
			
				
	
	
		
			50 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
			
		
		
	
	
			50 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
From 8432dc7c8a843e7c35d7624adc6653e13dd488a7 Mon Sep 17 00:00:00 2001
 | 
						|
From: Daniel Matuschek <info@crazy-audio.com>
 | 
						|
Date: Wed, 15 Jan 2014 21:41:23 +0100
 | 
						|
Subject: [PATCH] ASoC: wm8804: Implement MCLK configuration options, add 32bit
 | 
						|
 support WM8804 can run with PLL frequencies of 256xfs and 128xfs for most
 | 
						|
 sample rates. At 192kHz only 128xfs is supported. The existing driver selects
 | 
						|
 128xfs automatically for some lower samples rates. By using an additional
 | 
						|
 mclk_div divider, it is now possible to control the behaviour. This allows
 | 
						|
 using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow
 | 
						|
 lower jitter and better signal quality. The behavior has to be controlled by
 | 
						|
 the sound card driver, because some sample frequency share the same setting.
 | 
						|
 e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the
 | 
						|
 MCLK divider.
 | 
						|
 | 
						|
This also added support for 32bit data.
 | 
						|
 | 
						|
Signed-off-by: Daniel Matuschek <daniel@matuschek.net>
 | 
						|
---
 | 
						|
 sound/soc/codecs/wm8804.c | 5 +++--
 | 
						|
 1 file changed, 3 insertions(+), 2 deletions(-)
 | 
						|
 | 
						|
--- a/sound/soc/codecs/wm8804.c
 | 
						|
+++ b/sound/soc/codecs/wm8804.c
 | 
						|
@@ -304,6 +304,7 @@ static int wm8804_hw_params(struct snd_p
 | 
						|
 		blen = 0x1;
 | 
						|
 		break;
 | 
						|
 	case 24:
 | 
						|
+	case 32:
 | 
						|
 		blen = 0x2;
 | 
						|
 		break;
 | 
						|
 	default:
 | 
						|
@@ -515,7 +516,7 @@ static const struct snd_soc_dai_ops wm88
 | 
						|
 };
 | 
						|
 
 | 
						|
 #define WM8804_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
 | 
						|
-			SNDRV_PCM_FMTBIT_S24_LE)
 | 
						|
+			SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
 | 
						|
 
 | 
						|
 #define WM8804_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
 | 
						|
 		      SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
 | 
						|
@@ -543,7 +544,7 @@ static struct snd_soc_dai_driver wm8804_
 | 
						|
 };
 | 
						|
 
 | 
						|
 static const struct snd_soc_codec_driver soc_codec_dev_wm8804 = {
 | 
						|
-	.idle_bias_off = true,
 | 
						|
+	.idle_bias_off = false,
 | 
						|
 
 | 
						|
 	.component_driver = {
 | 
						|
 		.dapm_widgets		= wm8804_dapm_widgets,
 |