domenico/openwrt-R7800-nss
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mediatek: filogic: add support ASUS RT-AX59U

Browse Source 
(based on support for ASUS RT-AX59U by liushiyou006)

SOC: MediaTek MT7986
RAM: 512MB DDR4
FLASH: 128MB SPI-NAND (Winbond W25N01GV)
WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz
ETH: MediaTek MT7531 Switch
UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)

Upgrade from AsusWRT to OpenWRT using UART

    Download the OpenWrt initramfs image.
    Copy the image to a TFTP server reachable at 192.168.1.70/24. Rename the image to rtax59u.bin.

    Connect the PC with TFTP server to the RT-AX59U.
    Set a static ip on the ethernet interface of your PC.
    (ip address: 192.168.1.70, subnet mask:255.255.255.0)
    Conect to the serial console, interrupt the autoboot process by pressing '4' when prompted.

    Download & Boot the OpenWrt initramfs image.

    $ setenv ipaddr 192.168.1.1
    $ setenv serverip 192.168.1.70
    $ tftpboot 0x46000000 rtax59u.bin
    $ bootm 0x46000000

    Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade.

    $ sysupgrade -n <path-to-sysupgrade.bin>

Upgrade from AsusWRT to OpenWRT using WebUI

    Download transit TRX file from https://drive.google.com/drive/folders/1A20QdjK7Udagu31FSszpWAk8-cGlCwsq

    Upgrade firmware from WebUI (192.168.50.1) using downloaded TRX file

    Wait for OpenWRT to boot (192.168.1.1).

    Upgrade system with sysupgrade image using luci or uploading it through scp and executing sysupgrade command

MAC Address for WLAN 5g is not following the same algorithm as in AsusWRT.
We have increased by one the WLAN 5g to avoid collisions with other networks from WLAN 2g
when bit 28 is already set.

              : Stock             : OpenWrt
  WLAN 2g (1) : C8:xx:xx:0D:xx:D4 : C8:xx:xx:0D:xx:D4
  WLAN 2g (2) :                   : CA:xx:xx:0D:xx:D4
  WLAN 2g (3) :                   : CE:xx:xx:0D:xx:D4
  WLAN 5g (1) : CA:xx:xx:1D:xx:D4 : CA:xx:xx:1D:xx:D5
  WLAN 5g (2) :                   : CE:xx:xx:1D:xx:D5
  WLAN 5g (3) :                   : C2:xx:xx:1D:xx:D5

  WLAN 2g (1) : 08:xx:xx:76:xx:BE : 08:xx:xx:76:xx:BE
  WLAN 2g (2) :                   : 0A:xx:xx:76:xx:BE
  WLAN 2g (3) :                   : 0E:xx:xx:76:xx:BE
  WLAN 5g (1) : 0A:xx:xx:76:xx:BE : 0A:xx:xx:76:xx:BF
  WLAN 5g (2) :                   : 0E:xx:xx:76:xx:BF
  WLAN 5g (3) :                   : 02:xx:xx:76:xx:BF

Signed-off-by: Xavier Franquet <xavier@franquet.es>
This commit is contained in:
Xavier Franquet
2023-11-20 08:18:00 +01:00
committed by Hauke Mehrtens
parent 1fa705dbec
commit 782eb05008
7 changed files with 314 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
package/boot/uboot-envtools/files/mediatek_filogic
View File

@@ -12,6 +12,9 @@ touch /etc/config/ubootenv
board=$(board_name)
case "$board" in
asus,rt-ax59u)
ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
;;
bananapi,bpi-r3)
rootdev="$(cmdline_get_var root)"
rootdev="${rootdev##*/}"

263
target/linux/mediatek/dts/mt7986a-asus-rt-ax59u.dts Normal file
View File

@@ -0,0 +1,263 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include "mt7986a.dtsi"
/ {
model = "ASUS RT-AX59U";
compatible = "asus,rt-ax59u", "mediatek,mt7986a";
aliases {
serial0 = &uart0;
led-boot = &led_status_green;
led-failsafe = &led_status_red;
led-running = &led_status_green;
led-upgrade = &led_status_blue;
};
chosen {
stdout-path = "serial0:115200n8";
bootargs-override = "ubi.mtd=UBI_DEV";
};
memory {
reg = <0 0x40000000 0 0x20000000>;
};
keys {
compatible = "gpio-keys";
button-0 {
label = "wps";
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
button-1 {
label = "reset";
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_status_green: led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
};
led_status_red: led-1 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
};
led_status_blue: led-2 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
};
};
gpio-export {
compatible = "gpio-export";
out {
gpio-export,name = "led-light";
gpio-export,output = <0>;
gpios = <&pio 22 GPIO_ACTIVE_LOW>;
};
};
};
&crypto {
status = "okay";
};
&eth {
status = "okay";
gmac0: mac@0 {
/* LAN */
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
switch@1f {
compatible = "mediatek,mt7531";
reg = <31>;
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
label = "wan";
};
port@2 {
reg = <2>;
label = "lan1";
};
port@3 {
reg = <3>;
label = "lan2";
};
port@4 {
reg = <4>;
label = "lan3";
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
};
};
&pio {
spi_flash_pins: spi-flash-pins-33-to-38 {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
drive-strength = <8>;
mediatek,pull-up-adv = <0>; /* bias-disable */
};
conf-pd {
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
drive-strength = <8>;
mediatek,pull-down-adv = <0>; /* bias-disable */
};
};
wf_2g_5g_pins: wf_2g_5g-pins {
mux {
function = "wifi";
groups = "wf_2g", "wf_5g";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
wf_dbdc_pins: wf-dbdc-pins {
mux {
function = "wifi";
groups = "wf_dbdc";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
spi_nand: spi_nand@0 {
compatible = "spi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <20000000>;
spi-tx-buswidth = <4>;
spi-rx-buswidth = <4>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x400000>;
read-only;
};
partition@400000 {
label = "UBI_DEV";
reg = <0x400000 0x7c00000>;
};
};
};
};
&watchdog {
status = "okay";
};
&wifi {
status = "okay";
pinctrl-names = "default", "dbdc";
pinctrl-0 = <&wf_2g_5g_pins>;
pinctrl-1 = <&wf_dbdc_pins>;
};
&trng {
status = "okay";
};
&uart0 {
status = "okay";
};
&ssusb {
status = "okay";
};
&usb_phy {
status = "okay";
};

18
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
View File

@@ -14,6 +14,15 @@ mediatek_setup_interfaces()
acer,predator-w6)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1
;;
asus,rt-ax59u|\
cetron,ct3003|\
confiabits,mt7981|\
cudy,wr3000-v1|\
jcg,q30-pro|\
qihoo,360t7|\
routerich,ax3000)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
;;
asus,tuf-ax4200|\
mediatek,mt7981-rfb|\
zbtlink,zbt-z8102ax)
@@ -25,14 +34,6 @@ mediatek_setup_interfaces()
bananapi,bpi-r3)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
;;
cetron,ct3003|\
confiabits,mt7981|\
cudy,wr3000-v1|\
jcg,q30-pro|\
qihoo,360t7|\
routerich,ax3000)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan
;;
cmcc,rax3000m|\
h3c,magic-nx30-pro|\
zbtlink,zbt-z8103ax)
@@ -96,6 +97,7 @@ mediatek_setup_macs()
local label_mac=""
case $board in
asus,rt-ax59u|\
asus,tuf-ax4200|\
asus,tuf-ax6000)
CI_UBIPART="UBI_DEV"

1
target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
View File

@@ -59,6 +59,7 @@ case "$FIRMWARE" in
;;
"mediatek/mt7986_eeprom_mt7976_dbdc.bin")
case "$board" in
asus,rt-ax59u|\
asus,tuf-ax4200)
CI_UBIPART="UBI_DEV"
caldata_extract_ubi "Factory" 0x0 0x1000

10
target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
View File

@@ -16,6 +16,16 @@ case "$board" in
[ "$PHYNBR" = "1" ] && cat $key_path/6gMAC > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "2" ] && cat $key_path/5gMAC > /sys${DEVPATH}/macaddress
;;
asus,rt-ax59u)
CI_UBIPART="UBI_DEV"
addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
# Originally, phy1 is phy0 mac with LA and 28th bits set. However, this would conflict
# addresses on multiple VIFs with the other radio when bit 28 is already set.
# Set LA and 28 bits and increment mac-address instead.
[ "$PHYNBR" = "1" ] && \
macaddr_setbit_la $(macaddr_setbit $(macaddr_add $addr 1) 28) > \
/sys${DEVPATH}/macaddress
;;
asus,tuf-ax4200|\
asus,tuf-ax6000)
CI_UBIPART="UBI_DEV"

17
target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
View File

@@ -1,5 +1,16 @@
REQUIRE_IMAGE_METADATA=1
asus_initial_setup()
{
# initialize UBI if it's running on initramfs
[ "$(rootfs_type)" = "tmpfs" ] || return 0
ubirmvol /dev/ubi0 -N rootfs
ubirmvol /dev/ubi0 -N rootfs_data
ubirmvol /dev/ubi0 -N jffs2
ubimkvol /dev/ubi0 -N jffs2 -s 0x3e000
}
xiaomi_initial_setup()
{
# initialize UBI and setup uboot-env if it's running on initramfs
@@ -60,6 +71,7 @@ platform_do_upgrade() {
CI_ROOTPART="rootfs"
emmc_do_upgrade "$1"
;;
asus,rt-ax59u|\
asus,tuf-ax4200|\
asus,tuf-ax6000)
CI_UBIPART="UBI_DEV"
@@ -194,6 +206,11 @@ platform_pre_upgrade() {
local board=$(board_name)
case "$board" in
asus,rt-ax59u|\
asus,tuf-ax4200|\
asus,tuf-ax6000)
asus_initial_setup
;;
xiaomi,mi-router-wr30u-stock|\
xiaomi,redmi-router-ax6000-stock)
xiaomi_initial_setup

10
target/linux/mediatek/image/filogic.mk
View File

@@ -175,6 +175,16 @@ $(call Device/adtran_smartrg)
endef
TARGET_DEVICES += smartrg_sdg-8632
define Device/asus_rt-ax59u
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX59U
DEVICE_DTS := mt7986a-asus-rt-ax59u
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += asus_rt-ax59u
define Device/asus_tuf-ax4200
DEVICE_VENDOR := ASUS
DEVICE_MODEL := TUF-AX4200