4a1aca5376
Renamed 046..051 pending patches with the merged tag/hash. Two patches were skipped, they make use of WQ_BH present since v6.14:13221be7203e3aa566ddManually refreshed 062-v6.14-wifi-rtw88-Add-support-for-LED-blinking.patch Manually refreshed 063-v6.14-wifi-rtw88-add-RTW88_LEDS-depends-on-LEDS_CLASS-to-K.patch Manually backported 090-v6.15-wifi-rtw88-Enable-the-new-RTL8814AE-RTL8814AU-driver.patch git log --no-merges --pretty=oneline --abbrev-commit 4c2c372de...0daa521a drivers/net/wireless/realtek/rtw88: 4c2c372de2e1 wifi: rtw88: fix the 'para' buffer size to avoid reading out of bounds f24d0d8c3cd7 wifi: rtw88: Fix the random "error beacon valid" messages for USB 80fe0bc1659c wifi: rtw88: usb: Upload the firmware in bigger chunks 490340faddea wifi: rtw88: usb: Reduce control message timeout to 500 ms b7f0cc647e52 wifi: rtw88: rtw8822bu VID/PID for BUFFALO WI-U2-866DM 2c17afde9ff6 wifi: rtw88: Handle RTL8723D(S) with blank efuse 0ffa1ba81b35 wifi: rtw88: Fix RX aggregation settings for RTL8723DS 20d3c19bd8f9 wifi: rtw88: do not ignore hardware read error during DPK fc5f5a0ec463 wifi: rtw88: sdio: call rtw_sdio_indicate_tx_status unconditionally b2effcdc2379 wifi: rtw88: sdio: map mgmt frames to queue TX_DESC_QSEL_MGMT 581cf3a9cb61 wifi: rtw88: Fix the module names printed in dmesg b8d49bb8d16a wifi: rtw88: Don't set SUPPORTS_AMSDU_IN_AMPDU for RTL8814AU 0d2a88690e58 wifi: rtw88: Set AMPDU factor to hardware for RTL8814A dcbb7bb3a364 wifi: rtw88: usb: Enable RX aggregation for RTL8814AU bf1103654df9 wifi: rtw88: usb: Enable switching the RTL8814AU to USB 3 625fbc16524a wifi: rtw88: usb: Remove redundant 'flush_workqueue()' calls 5c4cf36c538b wifi: rtw88: sdio: Remove redundant 'flush_workqueue()' calls d58ad77d5cc2 wifi: rtw88: Add __nonstring annotations for unterminated strings deb3ddeb1865 wifi: rtw88: Enable the new RTL8814AE/RTL8814AU drivers bad060e8a425 wifi: rtw88: Add rtw8814au.c dad8e8793102 wifi: rtw88: Add rtw8814ae.c 1a7545784642 wifi: rtw88: Add rtw8814a.{c,h} e38246889cc9 wifi: rtw88: Add rtw8814a_table.c (part 2/2) f4debfcb1b3c wifi: rtw88: Add rtw8814a_table.c (part 1/2) 679ec431477c wifi: rtw88: Add some definitions for RTL8814AU c374281f8285 wifi: rtw88: Extend rtw_debugfs_get_tx_pwr_tbl() for RTL8814AU cfebabdd351e wifi: rtw88: Extend rtw_debugfs_get_phy_info() for RTL8814AU 8b42c46cf665 wifi: rtw88: Extend rtw_phy_config_swing_table() for RTL8814AU 053a7aace020 wifi: rtw88: Fix rtw_rx_phy_stat() for RTL8814AU 6be7544d19fc wifi: rtw88: Fix rtw_init_vht_cap() for RTL8814AU c7eea1ba05ca wifi: rtw88: Fix rtw_init_ht_cap() for RTL8814AU 86d04f8f991a wifi: rtw88: Fix rtw_desc_to_mcsrate() to handle MCS16-31 e66bca16638e wifi: rtw88: Fix rtw_mac_power_switch() for RTL8814AU 80c4668d024f wifi: rtw88: Add support for Mercusys MA30N and D-Link DWA-T185 rev. A1 9f00e2218e15 wifi: rtw88: Fix rtw_update_sta_info() for RTL8814AU 0f98a5959657 wifi: rtw88: Extend TX power stuff for 3-4 spatial streams ad815f392003 wifi: rtw88: Rename RTW_RATE_SECTION_MAX to RTW_RATE_SECTION_NUM e66f3b5c7535 wifi: rtw88: Constify some more structs and arrays 8f0076726b66 wifi: rtw88: Extend rtw_fw_send_ra_info() for RTL8814AU d80e7d9b6ba3 wifi: rtw88: Extend rf_base_addr and rf_sipi_addr for RTL8814AU 62f726848da4 wifi: rtw88: Extend struct rtw_pwr_track_tbl for RTL8814AU 9e8243025cc0 wifi: rtw88: Fix download_firmware_validate() for RTL8814AU 8425f5c8f04d wifi: rtw88: Fix __rtw_download_firmware() for RTL8814AU 105dc94233e4 wifi: rtw88: Fix a typo of debug message in rtw8723d_iqk_check_tx_failed() 0d1d165eff9d wifi: rtw88: Don't use static local variable in rtw8821c_set_tx_power_index_by_rate 00451eb3bec7 wifi: rtw88: Don't use static local variable in rtw8822b_set_tx_power_index_by_rate b4bfbc50b1b9 wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig 4b6652bc6d8d wifi: rtw88: Add support for LED blinking fb2fcfbe5eef wifi: rtw88: sdio: Fix disconnection after beacon loss a806a8160a0f wifi: rtw88: 8703b: Fix RX/TX issues 5ad483955acc wifi: rtw88: Delete rf_type member of struct rtw_sta_info 5b1b9545262b wifi: rtw88: Add USB PHY configuration not backported (3e3aa566dd18 wifi: rtw88: usb: Preallocate and reuse the RX skbs) not backported (13221be72034 wifi: rtw88: Handle C2H_ADAPTIVITY in rtw_fw_c2h_cmd_handle() ) e9048e2935f7 wifi: rtw88: usb: Copy instead of cloning the RX skb 74a72c367573 wifi: rtw88: 8821a/8812a: Set ptct_efuse_size to 0 59ab27a9f20f wifi: rtw88: 8812a: Support RFE type 2 Signed-off-by: Marty Jones <mj8263788@gmail.com> Link: https://github.com/openwrt/openwrt/pull/19052 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0