764cc5c6a6
The 2nd gmac of mediatek soc ethernet may not be connected to a PHY and a phy-handle isn't always available. Unfortunately, mt7530 dsa driver assumes that the 2nd gmac is always connected to switch port 5 and setup mt7530 according to phy address of 2nd gmac node, causing null pointer dereferencing when phy-handle isn't defined in dts. This commit fix this setup code by checking return value of of_parse_phandle before using it. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org