Initial commit
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
This commit is contained in:
domenico
23
target/linux/kirkwood/base-files/etc/board.d/01_leds
Normal file
23
target/linux/kirkwood/base-files/etc/board.d/01_leds
Normal file
@@ -0,0 +1,23 @@
|
||||
#
|
||||
# Copyright (C) 2012-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
iom,ix2-200)
|
||||
ucidef_set_led_timer "health" "health" "status:white:rebuild_led" "200" "800"
|
||||
;;
|
||||
linksys,e4200-v2|\
|
||||
linksys,ea4500)
|
||||
ucidef_set_led_default "pulse" "pulse" "viper:white:pulse" "1"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
93
target/linux/kirkwood/base-files/etc/board.d/02_network
Normal file
93
target/linux/kirkwood/base-files/etc/board.d/02_network
Normal file
@@ -0,0 +1,93 @@
|
||||
#
|
||||
# Copyright (C) 2012-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
kirkwood_setup_interfaces()
|
||||
{
|
||||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
checkpoint,l-50)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 dmz" "eth0"
|
||||
;;
|
||||
cisco,on100)
|
||||
ucidef_set_interface_lan "eth0 eth1"
|
||||
;;
|
||||
cloudengines,pogoe02|\
|
||||
cloudengines,pogoplugv4|\
|
||||
ctera,c200-v1|\
|
||||
dlink,dns320l|\
|
||||
globalscale,sheevaplug|\
|
||||
iom,iconnect-1.1|\
|
||||
iom,ix2-200|\
|
||||
iptime,nas1|\
|
||||
netgear,readynas-duo-v2|\
|
||||
netgear,stora|\
|
||||
raidsonic,ib-nas62x0|\
|
||||
seagate,blackarmor-nas220|\
|
||||
seagate,dockstar|\
|
||||
seagate,goflexhome|\
|
||||
seagate,goflexnet|\
|
||||
zyxel,nsa310b|\
|
||||
zyxel,nsa310s|\
|
||||
zyxel,nsa325)
|
||||
ucidef_set_interface_lan "eth0" "dhcp"
|
||||
;;
|
||||
endian,4i-edge-200)
|
||||
ucidef_set_interface_lan "port1 port2 port3 port4 eth1"
|
||||
;;
|
||||
iom,ix4-200d)
|
||||
ucidef_set_interface_lan "eth0 eth1" "dhcp"
|
||||
;;
|
||||
linksys,e4200-v2|\
|
||||
linksys,ea3500|\
|
||||
linksys,ea4500)
|
||||
ucidef_set_interfaces_lan_wan "ethernet1 ethernet2 ethernet3 ethernet4" "internet"
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
kirkwood_setup_macs()
|
||||
{
|
||||
local board="$1"
|
||||
local lan_mac=""
|
||||
local wan_mac=""
|
||||
local label_mac=""
|
||||
|
||||
case "$board" in
|
||||
dlink,dns320l)
|
||||
lan_mac=$(mtd_get_mac_text "mini firmware")
|
||||
;;
|
||||
iptime,nas1)
|
||||
lan_mac=$(mtd_get_mac_binary u-boot 0x3ffa8)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
linksys,e4200-v2|\
|
||||
linksys,ea3500|\
|
||||
linksys,ea4500)
|
||||
wan_mac=$(mtd_get_mac_ascii u_env eth1addr)
|
||||
;;
|
||||
zyxel,nsa310b|\
|
||||
zyxel,nsa325)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
;;
|
||||
esac
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
|
||||
[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
|
||||
}
|
||||
|
||||
board_config_update
|
||||
board=$(board_name)
|
||||
kirkwood_setup_interfaces $board
|
||||
kirkwood_setup_macs $board
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,17 @@
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
checkpoint,l-50)
|
||||
ucidef_add_gpio_switch "mpcie-rst" "mPCIE Card reset" "502" "1"
|
||||
ucidef_add_gpio_switch "exp-card-rst" "Express Card reset" "497" "1"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,24 @@
|
||||
#
|
||||
# Copyright (C) 2020 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
iom,ix2-200|\
|
||||
iom,ix4-200d)
|
||||
ucidef_set_compat_version "2.0"
|
||||
;;
|
||||
linksys,e4200-v2|\
|
||||
linksys,ea3500|\
|
||||
linksys,ea4500)
|
||||
ucidef_set_compat_version "3.0"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
13
target/linux/kirkwood/base-files/etc/init.d/bootcount
Executable file
13
target/linux/kirkwood/base-files/etc/init.d/bootcount
Executable file
@@ -0,0 +1,13 @@
|
||||
#!/bin/sh /etc/rc.common
|
||||
|
||||
START=99
|
||||
|
||||
boot() {
|
||||
case $(board_name) in
|
||||
linksys,e4200-v2|\
|
||||
linksys,ea3500|\
|
||||
linksys,ea4500)
|
||||
mtd resetbc s_env || true
|
||||
;;
|
||||
esac
|
||||
}
|
||||
59
target/linux/kirkwood/base-files/etc/init.d/hwmon_fancontrol
Executable file
59
target/linux/kirkwood/base-files/etc/init.d/hwmon_fancontrol
Executable file
@@ -0,0 +1,59 @@
|
||||
#!/bin/sh /etc/rc.common
|
||||
|
||||
START=98
|
||||
|
||||
boot() {
|
||||
# configuring onboard temp/fan controller to run the fan on its own
|
||||
# for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
|
||||
|
||||
case $(board_name) in
|
||||
ctera,c200-v1)
|
||||
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-004c/hwmon/hwmon0'
|
||||
|
||||
# It should be related to hdd temerature instead lm63 temp
|
||||
echo 1 > "$path_to_hwmon/pwm1_enable"
|
||||
echo 128 > "$path_to_hwmon/pwm1"
|
||||
;;
|
||||
iom,ix2-200)
|
||||
path_to_hwmon='/sys/class/hwmon/hwmon0'
|
||||
echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
|
||||
;;
|
||||
netgear,readynas-duo-v2)
|
||||
path_to_hwmon='/sys/class/hwmon/hwmon0'
|
||||
echo 1200 > "$path_to_hwmon/fan1_target" # set target rpm
|
||||
;;
|
||||
seagate,blackarmor-nas220)
|
||||
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
|
||||
# adt7476 fan control chip. 3 temp sensors. Set to 1/4 speed at 35C and max speed at 48C.
|
||||
echo 7 > "$path_to_hwmon/pwm1_auto_channels_temp"
|
||||
echo 64 > "$path_to_hwmon/pwm1_auto_point1_pwm"
|
||||
echo 255 > "$path_to_hwmon/pwm1_auto_point2_pwm"
|
||||
echo 35000 > "$path_to_hwmon/temp1_auto_point1_temp"
|
||||
echo 48000 > "$path_to_hwmon/temp1_auto_point2_temp"
|
||||
echo 35000 > "$path_to_hwmon/temp2_auto_point1_temp"
|
||||
echo 48000 > "$path_to_hwmon/temp2_auto_point2_temp"
|
||||
echo 35000 > "$path_to_hwmon/temp3_auto_point1_temp"
|
||||
echo 48000 > "$path_to_hwmon/temp3_auto_point2_temp"
|
||||
echo 2 > "$path_to_hwmon/pwm1_enable"
|
||||
;;
|
||||
zyxel,nsa310b)
|
||||
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
|
||||
# use the max. value of (temp1) OR (temp2) OR (temp3) as an input
|
||||
# for the PWM of the cooling fan
|
||||
echo 123 > "$path_to_hwmon/pwm1_auto_channels"
|
||||
# Temperature sensor #1 placed on mainboard
|
||||
echo 30000 > "$path_to_hwmon/temp1_auto_temp_min"
|
||||
echo 49600 > "$path_to_hwmon/temp1_auto_temp_max"
|
||||
# Temperature sensor #2 placed on mainboard
|
||||
# range: 0 to 127000 in steps of 1000 [millicelsius]
|
||||
echo 30000 > "$path_to_hwmon/temp2_auto_temp_min"
|
||||
# range: 0 to 127000 in steps of ???? [millicelsius]
|
||||
echo 49600 > "$path_to_hwmon/temp2_auto_temp_max"
|
||||
# Temperature sensor #3 placed close to a chipset
|
||||
# range: 0 to 60000 in steps of 1000 [millicelsius]
|
||||
echo 23000 > "$path_to_hwmon/temp3_auto_temp_min"
|
||||
# pre-defined steps: 103000, 122000, 143300, 170000 in [millicelsius]
|
||||
echo 103000 > "$path_to_hwmon/temp3_auto_temp_max"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
#
|
||||
# Copyright (C) 2021 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
netgear,stora)
|
||||
# Set fan script execution in crontab
|
||||
grep -s -q fan_ctrl.sh /etc/crontabs/root && exit 0
|
||||
|
||||
echo "# stora fan script runs every 5 minutes" >> /etc/crontabs/root
|
||||
echo "*/5 * * * * /sbin/fan_ctrl.sh" >> /etc/crontabs/root
|
||||
|
||||
# Execute one time after initial flash (instead of waiting 5 min for cron)
|
||||
/sbin/fan_ctrl.sh
|
||||
;;
|
||||
esac
|
||||
|
||||
exit 0
|
||||
Reference in New Issue
Block a user