5913543190
FCC allows maximum antenna gain of 6 dBi. 15.247(b)(4): > (4) The conducted output power limit > specified in paragraph (b) of this section > is based on the use of antennas > with directional gains that do not exceed > 6 dBi. Except as shown in paragraph > (c) of this section, if transmitting > antennas of directional gain greater > than 6 dBi are used, the conducted > output power from the intentional radiator > shall be reduced below the stated > values in paragraphs (b)(1), (b)(2), > and (b)(3) of this section, as appropriate, > by the amount in dB that the > directional gain of the antenna exceeds > 6 dBi. https://www.gpo.gov/fdsys/pkg/CFR-2013-title47-vol1/pdf/CFR-2013-title47-vol1-sec15-247.pdf Signed-off-by: Sven Eckelmann <sven@narfation.org>
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org