736419452b
This patch originally failed to combine INTA/B/C/D onto a single ARM CPU interrupt. Instead, it mapped INTA/B/C and excluded D. This patch corrects the issue by mapping all four interrupts to the single ARM CPU interrupt. The original intent of the patch still holds as the newer PCB take advantage of isolated interrupts. This fix only applies to older PCB's that do not route INTA/B/C/D to unique external ARM CPU interrupts. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 42830
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org