93c093057d
This patch adds the option to enable jumbo frames on the rtl8366s switch. This is almost exactly the same as the first patch at https://dev.openwrt.org/ticket/7977 and it has been requested in a comment there. I have tested this and it successfully allows devices on the switch using jumbo frames to communicate. Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk> SVN-Revision: 28267
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org