acedce1d79
The control device /dev/cdc-wdm0 is not available immediately on the D-Link DWR-921 Rev.C3, therefore the wwan interface fails to start at boot with a "The specified control device does not exist" error. This patch alters /lib/netifd/proto/qmi.sh to wait for network.wwan.delay earlier, before checking for the control device, instead of just before interacting with the modem. One still has to use network.wwan.proto='qmi', as the "wwan" proto performs that sort of check before any delay is possible, failing with a "No valid device was found" error. Signed-off-by: Thomas Equeter <tequeter@users.noreply.github.com>
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org