f2516e53c1
If ehci platform driver is loaded before the chipidea controller driver, both are competing for the same IO resources and the generic driver gets used for the hardware. This results in USB device mode being unavailable. Split generic EHCI support code out of kmod-usb2, so that the chipidea driver can be included without also pulling in the generic one. Also rework the load order, so that the chipidea driver gets loaded first, in case both are installed Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org